buildroot/board/lemaker/bananapro/boot.cmd

setenv fdt_high ffffffff
setenv bootargs console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait
fatload mmc 0 $kernel_addr_r zImage
fatload mmc 0 $fdt_addr_r sun7i-a20-bananapro.dtb
bootz $kernel_addr_r - $fdt_addr_r
board: add support for Banana Pro The board support package includes the following components: - U-Boot 2016.11 - Linux 4.9.3 - packages: - alsa-utils for basic audio usage of the on-board headphone jack and microphone - iw and wpa_supplicant for managing the wireless interface Two Linux patches are necessary to enable audio and wifi support. Both patches are fetched from the Linux next branch and are probably mainlined in Linux 4.11. A Linux configuration fragment enables the wireless device driver, which is not enabled by default in the mainline defconfig of the board. The wifi chip needs a NVRAM configuration file which is provided in the rootfs overlay. Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks> [Thomas: remove e2fsprogs from the target packages, add entry in DEVELOPERS file, remove C++ support.] Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> 2017-01-13 11:54:24 -07:00			`setenv fdt_high ffffffff`
			`setenv bootargs console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait`
			`fatload mmc 0 $kernel_addr_r zImage`
			`fatload mmc 0 $fdt_addr_r sun7i-a20-bananapro.dtb`
			`bootz $kernel_addr_r - $fdt_addr_r`