54 lines
1.7 KiB
Plaintext
54 lines
1.7 KiB
Plaintext
![]() |
Toradex Apalis i.MX6 Computer on Module
|
||
|
|
||
|
Intro
|
||
|
=====
|
||
|
|
||
|
The Apalis iMX6 is a small form-factor Computer on Module that comes
|
||
|
in both quad core and dual core versions based on Freescale i.MX6Q and
|
||
|
Freescale i.MX6D SoCs respectively. The Cortex A9 quad core and dual
|
||
|
core CPU peaks at 1 GHz for commercial temperature variant, while the
|
||
|
industrial temperature variant has a peak frequency of 800 MHz.
|
||
|
|
||
|
https://www.toradex.com/computer-on-modules/apalis-arm-family/freescale-imx-6
|
||
|
|
||
|
It supports two carrier boards:
|
||
|
|
||
|
Apalis Evaluation Board
|
||
|
https://www.toradex.com/products/carrier-boards/apalis-evaluation-board
|
||
|
|
||
|
Ixora Carrier Board
|
||
|
https://www.toradex.com/products/carrier-boards/ixora-carrier-board
|
||
|
|
||
|
How to build it
|
||
|
===============
|
||
|
|
||
|
Configure Buildroot:
|
||
|
|
||
|
$ make toradex_apalis_imx6_defconfig
|
||
|
|
||
|
Compile everything and build the rootfs image:
|
||
|
|
||
|
$ make
|
||
|
|
||
|
How to boot the image
|
||
|
=====================
|
||
|
|
||
|
The board only boots from its internal flash memory eMMC, so the
|
||
|
bootloader image should be copied to it, following the procedures
|
||
|
described in Toradex website.
|
||
|
|
||
|
http://developer.toradex.com/knowledge-base/flashing-linux-on-imx6-modules
|
||
|
|
||
|
Buildroot prepares a "sdcard.img" in output/images/ with the kernel
|
||
|
image, device tree and a root filesystem, ready to be dumped on an SD
|
||
|
card.
|
||
|
|
||
|
$ dd if=output/images/sdcard.img of=/dev/sdX bs=1M
|
||
|
|
||
|
To boot from the SD card, you should change the U-Boot
|
||
|
environment. Since U-Boot is running from internal eMMC, you will need
|
||
|
to access its command line prompt and manually set the necessary
|
||
|
variables to boot from the external SD card. For convenience, you can
|
||
|
use uEnv.txt provided in output/images/ as a reference to create the
|
||
|
necessary U-Boot variables to boot from the SD card.
|