configs: add a DT-enabled Raspberry Pi defconfig
This is an example of a Device-Tree-enabled Raspberry Pi defconfig.
We have to use a 3.18-based kernel for that, but there are a few
limitations:
- we can not use the minimalist RPi defconfig bundled with the kernel,
namely bcmrpi_quick_defconfig, because it is not DT-enabled, and
sets CONFIG_ARM_PATCH_PHYS_VIRT to 'n', which prompts a value for
CONFIG_PHYS_OFFSET, as it as no default for the bcm familly;
- most importantly, the rpi-3.18.y branch is constantly rebased, so
there is no guarantee that the sha1 I use today will still be usable
in the long term. Using the name of hte branch is not better either.
So, we bundle our own DT-enabled linux defconfig that is based on
bcmrpi_quick_defconfig, with just CONFIG_ARM_PATCH_PHYS_VIRT set and the
Device TRee enabled.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2015-01-10 06:14:57 -07:00
|
|
|
BR2_arm=y
|
|
|
|
BR2_arm1176jzf_s=y
|
2015-08-22 14:01:25 -06:00
|
|
|
BR2_ARM_EABIHF=y
|
2015-02-27 15:18:54 -07:00
|
|
|
|
2016-04-15 02:05:58 -06:00
|
|
|
BR2_SYSTEM_DHCP="eth0"
|
2015-02-27 15:18:54 -07:00
|
|
|
|
2018-03-24 08:10:12 -06:00
|
|
|
# Linux headers same as kernel, a 4.14 series
|
|
|
|
BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_14=y
|
2015-06-29 16:07:42 -06:00
|
|
|
|
|
|
|
BR2_TOOLCHAIN_BUILDROOT_CXX=y
|
2015-02-27 15:18:54 -07:00
|
|
|
|
configs: add a DT-enabled Raspberry Pi defconfig
This is an example of a Device-Tree-enabled Raspberry Pi defconfig.
We have to use a 3.18-based kernel for that, but there are a few
limitations:
- we can not use the minimalist RPi defconfig bundled with the kernel,
namely bcmrpi_quick_defconfig, because it is not DT-enabled, and
sets CONFIG_ARM_PATCH_PHYS_VIRT to 'n', which prompts a value for
CONFIG_PHYS_OFFSET, as it as no default for the bcm familly;
- most importantly, the rpi-3.18.y branch is constantly rebased, so
there is no guarantee that the sha1 I use today will still be usable
in the long term. Using the name of hte branch is not better either.
So, we bundle our own DT-enabled linux defconfig that is based on
bcmrpi_quick_defconfig, with just CONFIG_ARM_PATCH_PHYS_VIRT set and the
Device TRee enabled.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2015-01-10 06:14:57 -07:00
|
|
|
BR2_LINUX_KERNEL=y
|
configs: switch to a wget download for kernels on github
The linux git trees on github can be huge, and takes a long time to
download, which is not very nice nor convenient for newcomers.
Switch them to using a wget, with the github macro.
A nice side effect of this conversion, is that we no longer need to wait
for the git clone to finish to notice that the ref is gone; doing a wget
will instantly fail in that case.
Mechanical patch, obtained by running (hang-on tight):
$ sed -r -i -e 's/BR2_LINUX_KERNEL_CUSTOM_GIT/BR2_LINUX_KERNEL_CUSTOM_TARBALL/; /BR2_LINUX_KERNEL_CUSTOM_REPO_URL/N; s:BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https\://github.com/([^/]+)/(.+)"\nBR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="(.+)":BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,\1,\2,\3)/linux-\3.tar.gz":; s/(call github.*)\.git/\1/;' $(grep -l 'BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://github.com' configs/*)
olimex_a20_olinuxino_lime_mali had a comment in between, so it was
manually fixed thereafter; that comment was also moved.
Except for socrates_cyclone5 which did not work previously (missing tag
in git tree?), all the affected defconfigs still download their sources.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2018-04-01 03:04:55 -06:00
|
|
|
BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
|
2018-10-12 15:09:37 -06:00
|
|
|
BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,6d27aa156c26977dfd079a7107e31670127d17d3)/linux-6d27aa156c26977dfd079a7107e31670127d17d3.tar.gz"
|
2015-06-29 16:07:42 -06:00
|
|
|
BR2_LINUX_KERNEL_DEFCONFIG="bcmrpi"
|
2015-02-27 15:18:54 -07:00
|
|
|
|
2016-01-07 13:07:06 -07:00
|
|
|
# Build the DTBs for A/B, A+/B+ and compute module from the kernel sources
|
2015-06-29 16:07:42 -06:00
|
|
|
BR2_LINUX_KERNEL_DTS_SUPPORT=y
|
2016-01-07 13:07:06 -07:00
|
|
|
BR2_LINUX_KERNEL_INTREE_DTS_NAME="bcm2708-rpi-b bcm2708-rpi-b-plus bcm2708-rpi-cm"
|
2015-06-29 16:07:42 -06:00
|
|
|
|
configs: add a DT-enabled Raspberry Pi defconfig
This is an example of a Device-Tree-enabled Raspberry Pi defconfig.
We have to use a 3.18-based kernel for that, but there are a few
limitations:
- we can not use the minimalist RPi defconfig bundled with the kernel,
namely bcmrpi_quick_defconfig, because it is not DT-enabled, and
sets CONFIG_ARM_PATCH_PHYS_VIRT to 'n', which prompts a value for
CONFIG_PHYS_OFFSET, as it as no default for the bcm familly;
- most importantly, the rpi-3.18.y branch is constantly rebased, so
there is no guarantee that the sha1 I use today will still be usable
in the long term. Using the name of hte branch is not better either.
So, we bundle our own DT-enabled linux defconfig that is based on
bcmrpi_quick_defconfig, with just CONFIG_ARM_PATCH_PHYS_VIRT set and the
Device TRee enabled.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2015-01-10 06:14:57 -07:00
|
|
|
BR2_PACKAGE_RPI_FIRMWARE=y
|
2015-06-29 16:07:42 -06:00
|
|
|
# BR2_PACKAGE_RPI_FIRMWARE_INSTALL_DTB_OVERLAYS is not set
|
2015-12-31 06:28:08 -07:00
|
|
|
|
|
|
|
# Required tools to create the SD image
|
|
|
|
BR2_PACKAGE_HOST_DOSFSTOOLS=y
|
|
|
|
BR2_PACKAGE_HOST_GENIMAGE=y
|
|
|
|
BR2_PACKAGE_HOST_MTOOLS=y
|
|
|
|
|
|
|
|
# Filesystem / image
|
|
|
|
BR2_TARGET_ROOTFS_EXT2=y
|
|
|
|
BR2_TARGET_ROOTFS_EXT2_4=y
|
|
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
2016-04-17 15:45:46 -06:00
|
|
|
BR2_ROOTFS_POST_BUILD_SCRIPT="board/raspberrypi/post-build.sh"
|
2015-12-31 06:28:08 -07:00
|
|
|
BR2_ROOTFS_POST_IMAGE_SCRIPT="board/raspberrypi/post-image.sh"
|