configs/olimex_imx233_olinuxino: switch to u-boot
mxs-bootlets broke somewhere in between toolchain version bumps, leading to boot failure. Directly boot u-boot, as this is supported now, but it requires updated partitioning (see readme.txt) Drop mxs-bootlets patches, they aren't needed anymore. Kernel is built as an uImage because the u-boot defconfig expects an uImage on the second partition. Tested on iMX233-OLinuXino-MINI hardware. [Peter: adjust readme/config as suggested by Arnout] Signed-off-by: Phil Eichinger <phil@zankapfel.net> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit is contained in:
parent
a3c486d3e8
commit
0e21743fe3
|
@ -1,122 +0,0 @@
|
|||
Forward-ported patch from https://github.com/koliqi/imx23-olinuxino
|
||||
for mxs-bootlets-10.12.01
|
||||
|
||||
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
|
||||
|
||||
diff -Nura imx-bootlets-src-10.12.01/linux_prep/board/imx23_olinuxino_dev.c imx-bootlets-src-10.12.01-olinuxino/linux_prep/board/imx23_olinuxino_dev.c
|
||||
--- imx-bootlets-src-10.12.01/linux_prep/board/imx23_olinuxino_dev.c 1969-12-31 21:00:00.000000000 -0300
|
||||
+++ imx-bootlets-src-10.12.01-olinuxino/linux_prep/board/imx23_olinuxino_dev.c 2013-05-17 15:07:33.282961551 -0300
|
||||
@@ -0,0 +1,54 @@
|
||||
+/*
|
||||
+ * Platform specific data for the IMX23_OLINUXINO development board
|
||||
+ *
|
||||
+ * Fadil Berisha <fadil.r.berisha@gmail.com>
|
||||
+ *
|
||||
+ * Copyright 2008 SigmaTel, Inc
|
||||
+ * Copyright 2008 Embedded Alley Solutions, Inc
|
||||
+ * Copyright 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved.
|
||||
+ *
|
||||
+ * This file is licensed under the terms of the GNU General Public License
|
||||
+ * version 2. This program is licensed "as is" without any warranty of any
|
||||
+ * kind, whether express or implied.
|
||||
+ *
|
||||
+ * http://www.opensource.org/licenses/gpl-license.html
|
||||
+ * http://www.gnu.org/copyleft/gpl.html
|
||||
+ */
|
||||
+#include <setup.h>
|
||||
+#include <keys.h>
|
||||
+#include <lradc_buttons.h>
|
||||
+
|
||||
+/************************************************
|
||||
+ * LRADC keyboard data *
|
||||
+ ************************************************/
|
||||
+int lradc_keypad_ch = LRADC_CH0;
|
||||
+int lradc_vddio_ch = LRADC_CH6;
|
||||
+
|
||||
+struct lradc_keycode lradc_keycodes[] = {
|
||||
+ { 100, KEY4 },
|
||||
+ { 306, KEY5 },
|
||||
+ { 601, KEY6 },
|
||||
+ { 932, KEY7 },
|
||||
+ { 1260, KEY8 },
|
||||
+ { 1424, KEY9 },
|
||||
+ { 1707, KEY10 },
|
||||
+ { 2207, KEY11 },
|
||||
+ { 2525, KEY12 },
|
||||
+ { 2831, KEY13 },
|
||||
+ { 3134, KEY14 },
|
||||
+ { -1, 0 },
|
||||
+};
|
||||
+
|
||||
+/************************************************
|
||||
+ * Magic key combinations for Armadillo *
|
||||
+ ************************************************/
|
||||
+u32 magic_keys[MAGIC_KEY_NR] = {
|
||||
+ [MAGIC_KEY1] = KEY4,
|
||||
+ [MAGIC_KEY2] = KEY6,
|
||||
+ [MAGIC_KEY3] = KEY10,
|
||||
+};
|
||||
+
|
||||
+/************************************************
|
||||
+ * Default command line *
|
||||
+ ************************************************/
|
||||
+char cmdline_def[] = "console=ttyAMA0,115200";
|
||||
diff -Nura imx-bootlets-src-10.12.01/linux_prep/cmdlines/imx23_olinuxino_dev.txt imx-bootlets-src-10.12.01-olinuxino/linux_prep/cmdlines/imx23_olinuxino_dev.txt
|
||||
--- imx-bootlets-src-10.12.01/linux_prep/cmdlines/imx23_olinuxino_dev.txt 1969-12-31 21:00:00.000000000 -0300
|
||||
+++ imx-bootlets-src-10.12.01-olinuxino/linux_prep/cmdlines/imx23_olinuxino_dev.txt 2013-05-17 15:07:49.663496106 -0300
|
||||
@@ -0,0 +1,3 @@
|
||||
+console=ttyAMA0,115200 root=/dev/mmcblk0p2 rw rootwait
|
||||
+console=ttyAMA0,115200 root=/dev/mmcblk0p2 rw rootwait
|
||||
+console=ttyAMA0,115200 root=/dev/mmcblk0p2 rw rootwait
|
||||
diff -Nura imx-bootlets-src-10.12.01/linux_prep/core/setup.c imx-bootlets-src-10.12.01-olinuxino/linux_prep/core/setup.c
|
||||
--- imx-bootlets-src-10.12.01/linux_prep/core/setup.c 2010-11-04 04:35:38.000000000 -0300
|
||||
+++ imx-bootlets-src-10.12.01-olinuxino/linux_prep/core/setup.c 2013-05-17 15:08:39.246114205 -0300
|
||||
@@ -84,6 +84,8 @@
|
||||
#include "../../mach-mx28/includes/registers/regsrtc.h"
|
||||
#elif defined(STMP378X)
|
||||
#include "../../mach-mx23/includes/registers/regsrtc.h"
|
||||
+#elif defined(IMX23_OLINUXINO)
|
||||
+#include "../../mach-mx23/includes/registers/regsrtc.h"
|
||||
#endif
|
||||
|
||||
#define NAND_SECONDARY_BOOT 0x00000002
|
||||
diff -Nura imx-bootlets-src-10.12.01/linux_prep/include/mx23/platform.h imx-bootlets-src-10.12.01-olinuxino/linux_prep/include/mx23/platform.h
|
||||
--- imx-bootlets-src-10.12.01/linux_prep/include/mx23/platform.h 2010-11-04 04:35:38.000000000 -0300
|
||||
+++ imx-bootlets-src-10.12.01-olinuxino/linux_prep/include/mx23/platform.h 2013-05-17 15:09:21.006476997 -0300
|
||||
@@ -19,6 +19,8 @@
|
||||
|
||||
#if defined (BOARD_STMP378X_DEV)
|
||||
#define MACHINE_ID 0xa45
|
||||
+#elif defined (BOARD_IMX23_OLINUXINO_DEV)
|
||||
+#define MACHINE_ID 0x1009
|
||||
#else
|
||||
#error "Allocate a machine ID for your board"
|
||||
#endif
|
||||
diff -Nura imx-bootlets-src-10.12.01/linux_prep/Makefile imx-bootlets-src-10.12.01-olinuxino/linux_prep/Makefile
|
||||
--- imx-bootlets-src-10.12.01/linux_prep/Makefile 2010-11-04 04:35:38.000000000 -0300
|
||||
+++ imx-bootlets-src-10.12.01-olinuxino/linux_prep/Makefile 2013-05-17 15:09:53.554539143 -0300
|
||||
@@ -69,6 +69,11 @@
|
||||
HW_OBJS = $(LRADC_OBJS)
|
||||
CFLAGS += -DMX28 -DBOARD_MX28_EVK
|
||||
endif
|
||||
+ifeq ($(BOARD), imx23_olinuxino_dev)
|
||||
+ARCH = mx23
|
||||
+HW_OBJS = $(LRADC_OBJS)
|
||||
+CFLAGS += -DIMX23_OLINUXINO -DBOARD_IMX23_OLINUXINO_DEV
|
||||
+endif
|
||||
|
||||
# Generic code
|
||||
CORE_OBJS = entry.o resume.o cmdlines.o setup.o keys.o
|
||||
diff -Nura imx-bootlets-src-10.12.01/Makefile imx-bootlets-src-10.12.01-olinuxino/Makefile
|
||||
--- imx-bootlets-src-10.12.01/Makefile 2010-11-04 04:35:38.000000000 -0300
|
||||
+++ imx-bootlets-src-10.12.01-olinuxino/Makefile 2013-05-17 15:23:53.709956619 -0300
|
||||
@@ -16,6 +16,9 @@
|
||||
ifeq ($(BOARD), iMX28_EVK)
|
||||
ARCH = mx28
|
||||
endif
|
||||
+ifeq ($(BOARD), imx23_olinuxino_dev)
|
||||
+ARCH = mx23
|
||||
+endif
|
||||
|
||||
all: build_prep gen_bootstream
|
||||
|
|
@ -6,10 +6,11 @@ one or more of: hostapd, iw, wireless_tools and/or wpa_supplicant.
|
|||
It also pulls up the console on the serial port, not on TV output.
|
||||
|
||||
You'll need a spare MicroSD card with Freescale's special partition layout.
|
||||
This is basically two partitions:
|
||||
This is basically three partitions:
|
||||
|
||||
1) Type 53, the bootstrap + bootloader/kernel partition, should be 16MB.
|
||||
2) Anything you like, for this example an ext2 partition, type 83 (linux).
|
||||
1) Type 53, the U-Boot partition, should be 16MB.
|
||||
2) VFAT, place the kernel uImage there
|
||||
3) Anything you like, for this example an ext2 partition, type 83 (linux).
|
||||
|
||||
Assuming you see your MicroSD card as /dev/sdc you'd need to do, as root
|
||||
and from the buildroot project top level directory:
|
||||
|
@ -43,15 +44,31 @@ and from the buildroot project top level directory:
|
|||
p
|
||||
2
|
||||
<ENTER>
|
||||
+5M
|
||||
t
|
||||
2
|
||||
4
|
||||
n
|
||||
p
|
||||
3
|
||||
<ENTER>
|
||||
<ENTER>
|
||||
w
|
||||
|
||||
4. Fill up the first (bootstrap + kernel) partition
|
||||
# dd if=output/images/imx23_olinuxino_dev_linux.sb bs=512 of=/dev/sdc1 seek=4
|
||||
4. Fill up the first (U-Boot) partition
|
||||
# dd if=output/images/u-boot.sd bs=512 of=/dev/sdc1
|
||||
|
||||
5. Fill up the second (filesystem) partition
|
||||
# dd if=output/images/rootfs.ext2 of=/dev/sdc2 bs=512
|
||||
5. Create VFAT Filesystem
|
||||
# mkfs.vfat /dev/sdc2
|
||||
|
||||
6. Remove the MicroSD card from your linux PC and put it into your olinuxino.
|
||||
6. Mount and copy output/images/uImage.imx23-olinuxino to the VFAT partition, rename to uImage
|
||||
# mount /dev/sdc2 /mnt
|
||||
# cp output/images/uImages/uImage.imx23-olinuxino /mnt/uImage
|
||||
# umount /mnt
|
||||
|
||||
7. Boot! You're done!
|
||||
7. Fill up the third (filesystem) partition
|
||||
# dd if=output/images/rootfs.ext2 of=/dev/sdc3 bs=512
|
||||
|
||||
8. Remove the MicroSD card from your linux PC and put it into your olinuxino.
|
||||
|
||||
9. Boot! You're done!
|
||||
|
|
|
@ -2,38 +2,23 @@
|
|||
BR2_arm=y
|
||||
BR2_arm926t=y
|
||||
|
||||
# Patches (mxs-bootlets)
|
||||
BR2_GLOBAL_PATCH_DIR="board/olimex/imx233_olinuxino"
|
||||
|
||||
# System
|
||||
BR2_TARGET_GENERIC_GETTY=y
|
||||
BR2_TARGET_GENERIC_GETTY_PORT="ttyAMA0"
|
||||
|
||||
# Filesystem
|
||||
BR2_TARGET_ROOTFS_EXT2=y
|
||||
# BR2_TARGET_ROOTFS_TAR is not set
|
||||
|
||||
# Linux headers same as kernel, a 3.18 series
|
||||
BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_3_18=y
|
||||
|
||||
# Bootloader
|
||||
BR2_TARGET_MXS_BOOTLETS=y
|
||||
BR2_TARGET_MXS_BOOTLETS_CUSTOM_PATCH_DIR="board/olimex/imx233_olinuxino"
|
||||
BR2_TARGET_MXS_BOOTLETS_CUSTOM_BOARD=y
|
||||
BR2_TARGET_MXS_BOOTLETS_CUSTOM_BOARD_NAME="imx23_olinuxino_dev"
|
||||
# For automatic firmware loading
|
||||
BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_MDEV=y
|
||||
|
||||
# Kernel
|
||||
BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_3_18=y
|
||||
BR2_LINUX_KERNEL=y
|
||||
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
|
||||
BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.18.2"
|
||||
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
|
||||
BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/olimex/imx233_olinuxino/linux-3.18.config"
|
||||
BR2_LINUX_KERNEL_APPENDED_ZIMAGE=y
|
||||
BR2_LINUX_KERNEL_APPENDED_UIMAGE=y
|
||||
BR2_LINUX_KERNEL_UIMAGE_LOADADDR="0x42000000"
|
||||
BR2_LINUX_KERNEL_INTREE_DTS_NAME="imx23-olinuxino"
|
||||
|
||||
# For automatic firmware loading
|
||||
BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_MDEV=y
|
||||
|
||||
# Firmware for WiFi
|
||||
BR2_PACKAGE_LINUX_FIRMWARE=y
|
||||
BR2_PACKAGE_LINUX_FIRMWARE_ATHEROS_7010=y
|
||||
|
@ -42,3 +27,15 @@ BR2_PACKAGE_LINUX_FIRMWARE_RALINK_RT73=y
|
|||
BR2_PACKAGE_LINUX_FIRMWARE_RALINK_RT2XX=y
|
||||
BR2_PACKAGE_LINUX_FIRMWARE_RTL_81XX=y
|
||||
BR2_PACKAGE_ZD1211_FIRMWARE=y
|
||||
|
||||
# Filesystem
|
||||
BR2_TARGET_ROOTFS_EXT2=y
|
||||
# BR2_TARGET_ROOTFS_TAR is not set
|
||||
|
||||
# U-Boot
|
||||
BR2_TARGET_UBOOT=y
|
||||
BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
|
||||
BR2_TARGET_UBOOT_CUSTOM_VERSION=y
|
||||
BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2016.01"
|
||||
BR2_TARGET_UBOOT_BOARD_DEFCONFIG="mx23_olinuxino"
|
||||
BR2_TARGET_UBOOT_FORMAT_SD=y
|
||||
|
|
Loading…
Reference in a new issue