configs/odroidxu4: new defconfig
This patch provides support for the board Odroid XU4. It uses a recent 4.14 kernel released by Hardkernel, and the current u-boot 2017.05 also from Hardkernel. Signed-off-by: Pierre CROKAERT <pct@crookies.net> [Thomas: - Update DEVELOPERS file - Update .gitlab-ci.yml file - Simplify the boot.ini script - Add missing BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_14 option - Add BR2_PACKAGE_HOST_DOSFSTOOLS and BR2_PACKAGE_HOST_MTOOLS since a VFAT filesystem is generated - Keep the default root filesystem size, since it is sufficient. - Reduce the size of the VFAT filesystem] Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>2018.11.x
Pierre CROKAERT
Thomas Petazzoni
parent
f3f6c914af
commit
26034b8663
|
|
@ -168,6 +168,7 @@ nitrogen6x_defconfig: *defconfig
|
|||
nitrogen7_defconfig: *defconfig
|
||||
nitrogen8m_defconfig: *defconfig
|
||||
odroidc2_defconfig: *defconfig
|
||||
odroidxu4_defconfig: *defconfig
|
||||
olimex_a10_olinuxino_lime_defconfig: *defconfig
|
||||
olimex_a13_olinuxino_defconfig: *defconfig
|
||||
olimex_a20_olinuxino_lime2_defconfig: *defconfig
|
||||
|
|
|
|||
|
|
@ -1727,6 +1727,10 @@ F: package/lttng-tools/
|
|||
F: package/python-ipython/
|
||||
F: package/liburcu/
|
||||
|
||||
N: Pierre Crokaert <pct@crookies.net>
|
||||
F: board/hardkernel/odroidxu4/
|
||||
F: configs/odroidxu4_defconfig
|
||||
|
||||
N: Pierre Ducroquet <pinaraf@pinaraf.info>
|
||||
F: package/kf5/
|
||||
|
||||
|
|
|
|||
|
|
@ -0,0 +1,38 @@
|
|||
ODROIDXU-UBOOT-CONFIG
|
||||
|
||||
# U-Boot Parameters
|
||||
setenv initrd_high "0xffffffff"
|
||||
setenv fdt_high "0xffffffff"
|
||||
|
||||
setenv macaddr "00:1e:06:61:7a:39"
|
||||
setenv bootrootfs "console=tty1 root=/dev/mmcblk1p2 rootwait rw fsck.repair=yes net.ifnames=0"
|
||||
setenv bootcmd "load mmc 0:1 0x40008000 zImage; load mmc 0:1 0x44000000 exynos5422-odroidxu4.dtb; bootz 0x40008000 - 0x44000000"
|
||||
setenv vout "hdmi"
|
||||
setenv governor "performance"
|
||||
setenv HPD "true"
|
||||
|
||||
# TMDS data amplitude control.
|
||||
setenv hdmi_tx_amp_lvl "31"
|
||||
|
||||
# TMDS data amplitude fine control for each channel.
|
||||
setenv hdmi_tx_lvl_ch0 "3"
|
||||
setenv hdmi_tx_lvl_ch1 "3"
|
||||
setenv hdmi_tx_lvl_ch2 "3"
|
||||
|
||||
# TMDS data pre-emphasis level control.
|
||||
setenv hdmi_tx_emp_lvl "6"
|
||||
|
||||
# TMDS clock amplitude control.
|
||||
setenv hdmi_clk_amp_lvl "31"
|
||||
|
||||
# TMDS data source termination resistor control.
|
||||
setenv hdmi_tx_res "0"
|
||||
|
||||
setenv hdmi_phy_control "hdmi_tx_amp_lvl=${hdmi_tx_amp_lvl} hdmi_tx_lvl_ch0=${hdmi_tx_lvl_ch0} hdmi_tx_lvl_ch1=${hdmi_tx_lvl_ch1} hdmi_tx_lvl_ch2=${hdmi_tx_lvl_ch2} hdmi_tx_emp_lvl=${hdmi_tx_emp_lvl} hdmi_clk_amp_lvl=${hdmi_clk_amp_lvl} hdmi_tx_res=${hdmi_tx_res} HPD=${HPD} vout=${vout}"
|
||||
|
||||
# final boot args
|
||||
setenv bootargs "${bootrootfs} ${videoconfig} smsc95xx.macaddr=${macaddr} governor=${governor} ${hdmi_phy_control}"
|
||||
|
||||
# Boot the board
|
||||
boot
|
||||
|
||||
|
|
@ -0,0 +1,54 @@
|
|||
image boot.vfat {
|
||||
vfat {
|
||||
files = {
|
||||
"boot.ini",
|
||||
"zImage",
|
||||
"exynos5422-odroidxu4.dtb"
|
||||
}
|
||||
}
|
||||
size = 32M
|
||||
}
|
||||
|
||||
image sdcard.img {
|
||||
hdimage {
|
||||
}
|
||||
|
||||
partition bl1 {
|
||||
in-partition-table = "no"
|
||||
image = "bl1.bin.hardkernel"
|
||||
offset = 512
|
||||
size = 15360
|
||||
}
|
||||
|
||||
partition bl2 {
|
||||
in-partition-table = "no"
|
||||
image = "bl2.bin.hardkernel.720k_uboot"
|
||||
offset = 15872
|
||||
size = 16384
|
||||
}
|
||||
|
||||
partition u-boot {
|
||||
in-partition-table = "no"
|
||||
image = "u-boot-dtb.bin"
|
||||
offset = 32256
|
||||
size = 720k
|
||||
}
|
||||
|
||||
partition tzsw {
|
||||
in-partition-table = "no"
|
||||
image = "tzsw.bin.hardkernel"
|
||||
offset = 769536
|
||||
size = 256k
|
||||
}
|
||||
|
||||
partition vfat {
|
||||
partition-type = 0xC
|
||||
image = "boot.vfat"
|
||||
offset = 2097152
|
||||
}
|
||||
|
||||
partition rootfs {
|
||||
partition-type = 0x83
|
||||
image = "rootfs.ext4"
|
||||
}
|
||||
}
|
||||
|
|
@ -0,0 +1,24 @@
|
|||
#!/bin/sh
|
||||
|
||||
BOARD_DIR="$(dirname $0)"
|
||||
GENIMAGE_CFG="${BOARD_DIR}/genimage.cfg"
|
||||
GENIMAGE_TMP="${BUILD_DIR}/genimage.tmp"
|
||||
|
||||
cp ${BOARD_DIR}/boot.ini ${BINARIES_DIR}/
|
||||
|
||||
# The bl1.bin.hardkernel file provided by the uboot hardkernel repository is overwritten
|
||||
# by the bl2.bin.hardkernel in the sd_fusing.sh script because it is too big.
|
||||
# In order to implement this in genimage, we need to truncate the bl1.bin file
|
||||
# so that it does not exceed the available place.
|
||||
# An issue has been filled about this: https://github.com/hardkernel/u-boot/issues/45
|
||||
truncate -s 15360 ${BINARIES_DIR}/bl1.bin.hardkernel
|
||||
|
||||
rm -rf "${GENIMAGE_TMP}"
|
||||
|
||||
genimage \
|
||||
--rootpath "${TARGET_DIR}" \
|
||||
--tmppath "${GENIMAGE_TMP}" \
|
||||
--inputpath "${BINARIES_DIR}" \
|
||||
--outputpath "${BINARIES_DIR}" \
|
||||
--config "${GENIMAGE_CFG}"
|
||||
|
||||
|
|
@ -0,0 +1,37 @@
|
|||
Odroid XU-4 board with Samsung Exynos 5422 SoC
|
||||
|
||||
How to build it
|
||||
===============
|
||||
|
||||
$ make odroidxu4_defconfig
|
||||
|
||||
Then you can edit the build options using
|
||||
|
||||
$ make menuconfig
|
||||
|
||||
Compile all and build rootfs image:
|
||||
|
||||
$ make
|
||||
|
||||
Note: you will need to have access to the network, since Buildroot will
|
||||
download the packages' sources.
|
||||
|
||||
Result of the build
|
||||
-------------------
|
||||
|
||||
After building, you should obtain all output files in output/images/
|
||||
|
||||
|
||||
How to write the SD card or eMMC
|
||||
================================
|
||||
|
||||
Once the build process is finished you will have an image called "sdcard.img"
|
||||
in the output/images/ directory.
|
||||
|
||||
Copy the bootable "sdcard.img" onto an SD card or eMMC with "dd":
|
||||
|
||||
$ sudo dd if=output/images/sdcard.img of=/dev/sdX
|
||||
|
||||
Insert the SDcard into your ODROID-XU4, and power it up. Your new system
|
||||
should come up now.
|
||||
|
||||
|
|
@ -0,0 +1,27 @@
|
|||
BR2_arm=y
|
||||
BR2_cortex_a7=y
|
||||
BR2_ROOTFS_POST_IMAGE_SCRIPT="board/hardkernel/odroidxu4/post-image.sh"
|
||||
BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_14=y
|
||||
BR2_LINUX_KERNEL=y
|
||||
BR2_LINUX_KERNEL_CUSTOM_GIT=y
|
||||
BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://github.com/hardkernel/linux.git"
|
||||
BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="4.14.16-104"
|
||||
BR2_LINUX_KERNEL_DEFCONFIG="odroidxu4"
|
||||
BR2_LINUX_KERNEL_DTS_SUPPORT=y
|
||||
BR2_LINUX_KERNEL_INTREE_DTS_NAME="exynos5422-odroidxu4"
|
||||
BR2_TARGET_ROOTFS_EXT2=y
|
||||
BR2_TARGET_ROOTFS_EXT2_4=y
|
||||
# BR2_TARGET_ROOTFS_TAR is not set
|
||||
BR2_TARGET_UBOOT=y
|
||||
BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
|
||||
BR2_TARGET_UBOOT_CUSTOM_GIT=y
|
||||
BR2_TARGET_UBOOT_CUSTOM_REPO_URL="https://github.com/hardkernel/u-boot.git"
|
||||
BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="88af53fbcef8386cb4d5f04c19f4b2bcb69e90ca"
|
||||
BR2_TARGET_UBOOT_BOARD_DEFCONFIG="odroid-xu4"
|
||||
BR2_TARGET_UBOOT_NEEDS_DTC=y
|
||||
BR2_TARGET_UBOOT_FORMAT_DTB_BIN=y
|
||||
BR2_TARGET_UBOOT_SPL=y
|
||||
BR2_TARGET_UBOOT_SPL_NAME="sd_fuse/bl1.bin.hardkernel sd_fuse/bl2.bin.hardkernel.720k_uboot sd_fuse/tzsw.bin.hardkernel "
|
||||
BR2_PACKAGE_HOST_DOSFSTOOLS=y
|
||||
BR2_PACKAGE_HOST_GENIMAGE=y
|
||||
BR2_PACKAGE_HOST_MTOOLS=y
|
||||
Loading…
Reference in New Issue