deepcrayon
/
buildroot
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

zynq: unify readme.txt for all Zynq boards 

The readme.txt for the three boards are almost the same, so merge
them into board/zynq/readme.txt.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016.08.x
Masahiro Yamada 2016-07-18 18:38:23 +09:00 committed by Thomas Petazzoni
parent b9cd72cdbf
commit 47b6b382b3
4 changed files with 52 additions and 90 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

33
board/avnet/microzed/readme.txt
View File

@ -1,33 +0,0 @@
This is the buildroot board support for the Avnet Microzed. The Microzed is
a development board based on the Xilinx Zynq-7000 based All-Programmable
System-On-Chip.
Microzed information including schematics, reference designs, and manuals are
available from http://www.zedboard.org .
Steps to create a working system for Microzed:
1) make zynq_microzed_defconfig
2) make
2) make
3) All needed files will be available in the output/images directory.
Create a FAT32 partition at the beginning of your SD Card and copy files:
- boot.bin
- u-boot.img
- uImage
- uramdisk.image.gz (should be renamed from rootfs.cpio.uboot)
- devicetree.dtb (should be renamed from zynq-zed.dtb)
into your SD card
4) boot your Microzed
Note th at the DTB (zynq-zed.dtb) is the same as the one used for the
Zedboard, and that this is the recommended solution, see
https://forums.xilinx.com/t5/Embedded-Linux/Microzed-default-device-tree-dts/td-p/432856.
You can alter the booting procedure by creating a file uEnv.txt
in the root of the SD card. It is a plain text file in format
<key>=<value> one per line:
kernel_image=myimage
modeboot=myboot
myboot=...

28
board/avnet/zedboard/readme.txt
View File

@ -1,28 +0,0 @@
This is the buildroot board support for the Avnet Zedboard. The Zedboard is
a development board based on the Xilinx Zynq-7000 based All-Programmable
System-On-Chip.
Zedboard information including schematics, reference designs, and manuals are
available from http://www.zedboard.org .
Steps to create a working system for Zedboard:
1) make zynq_zed_defconfig
2) make
3) All needed files will be available in the output/images directory.
Create a FAT32 partition at the beginning of your SD Card and copy files:
- boot.bin
- u-boot.img
- uImage
- uramdisk.image.gz (should be renamed from rootfs.cpio.uboot)
- devicetree.dtb (should be renamed from zynq-zed.dtb)
into your SD card
4) boot your Zedboard
You can alter the booting procedure by creating a file uEnv.txt
in the root of the SD card. It is a plain text file in format
<key>=<value> one per line:
kernel_image=myimage
modeboot=myboot
myboot=...

29
board/xilinx/zc706/readme.txt
View File

@ -1,29 +0,0 @@
This is the Buildroot board support for the Xilinx ZC706. The ZC706 is
a development board based on the Xilinx Zynq-7000 based
All-Programmable System-On-Chip.
ZC706 information including schematics, reference designs, and manuals
are available from
http://www.xilinx.com/products/boards-and-kits/ek-z7-zc706-g.html.
Steps to create a working system for ZC706 board:
1) make zynq_zc706_defconfig
2) make
3) All needed files will be available in the output/images directory.
Create a FAT32 partition at the beginning of your SD Card and copy files:
- boot.bin
- u-boot.img
- uImage
- uramdisk.image.gz (should be renamed from rootfs.cpio.uboot)
- devicetree.dtb (should be renamed from zynq-zc706.dtb)
into your SD card
4) boot your ZC706 board
You can alter the booting procedure by creating a file uEnv.txt
in the root of the SD card. It is a plain text file in format
<key>=<value> one per line:
kernel_image=myimage
modeboot=myboot
myboot=...

52
board/zynq/readme.txt 100644
View File

@ -0,0 +1,52 @@
This is the Buildroot support for Zynq boards. Zynq boards are available from
Xilinx and some third party vendors, but the build procedure is very similar.
Currently, three boards are natively supported by Buildroot:
- Xilinx ZC706 board (zynq_zc706_defconfig)
- Avnet ZedBoard (zynq_zed_defconfig)
- Avnet MicroZed (zynq_microzed_defconfig)
The following build procedure focuses on them, but you can adjust it to your
board even if it is not listed above. Major Zynq-based boards are supported by
U-Boot, and their Device Trees are merged in Linux Kernel. If your board is the
case, booting the kernel is a piece of cake. All you need to do is to change:
- Kernel Device Tree file name (BR2_LINUX_KERNEL_INTREE_DTS_NAME)
- U-Boot board defconfig (BR2_TARGET_UBOOT_BOARDNAME)
Steps to create a working system for a Zynq board:
1) Configuration (do one of the followings)
make zynq_zc706_defconfig (ZC706)
make zynq_zed_defconfig (Zedboard)
make zynq_microzed_defconfig (MicroZed)
2) make
3) All needed files will be available in the output/images directory.
Create a FAT32 partition at the beginning of your SD Card and copy files:
- boot.bin
- u-boot.img
- uImage
- uramdisk.image.gz (should be renamed from rootfs.cpio.uboot)
- devicetree.dtb (should be renamed from zynq-***.dtb)
into your SD card
4) boot your board
You can alter the booting procedure by creating a file uEnv.txt
in the root of the SD card. It is a plain text file in format
<key>=<value> one per line:
kernel_image=myimage
modeboot=myboot
myboot=...
Note:
The DTB for MicroZed is the same as the one for the Zedboard (zynq-zed.dtb),
and this is the recommended solution, see
https://forums.xilinx.com/t5/Embedded-Linux/Microzed-default-device-tree-dts/td-p/432856.
References:
- ZC706 information including schematics, reference designs, and manuals are
available from
http://www.xilinx.com/products/boards-and-kits/ek-z7-zc706-g.html.
- Zedboard/Microzed information including schematics, reference designs, and
manuals are available from http://www.zedboard.org .