configs/mx6sx_udoo_neo: Bump to kernel 4.10
The imx6sx-udoo-neo dts patches have been upstreamed in kernel 4.10, so bump to this version and remove the local patches. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit is contained in:
parent
1cc0c0dc82
commit
689f3c5031
|
@ -1,560 +0,0 @@
|
|||
From 76e691fc7653b85d390e58710e5c7db73ca49367 Mon Sep 17 00:00:00 2001
|
||||
From: Andreas Färber <afaerber@suse.de>
|
||||
Date: Sun, 16 Oct 2016 16:44:23 +0200
|
||||
Subject: ARM: dts: imx6sx: Add UDOO Neo support
|
||||
MIME-Version: 1.0
|
||||
Content-Type: text/plain; charset=UTF-8
|
||||
Content-Transfer-Encoding: 8bit
|
||||
|
||||
Add initial device trees for UDOO Neo Basic, Extended and Full boards:
|
||||
* Serial console is enabled, other serial ports are prepared.
|
||||
* I2C based PMIC is enabled.
|
||||
* Ethernet is enabled for Basic and Full.
|
||||
* SDHC is enabled, with the SDIO_PWR GPIO modeled as a regulator.
|
||||
* Both user LEDs are enabled, with the orange one reserved for the M4
|
||||
and with the SD card as default trigger for the red LED.
|
||||
|
||||
The decision on a board compatible string is deferred to later.
|
||||
|
||||
Cc: Ettore Chimenti <ettore.chimenti@udoo.org>
|
||||
Signed-off-by: Andreas Färber <afaerber@suse.de>
|
||||
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
||||
---
|
||||
arch/arm/boot/dts/Makefile | 5 +-
|
||||
arch/arm/boot/dts/imx6sx-udoo-neo-basic.dts | 69 ++++++
|
||||
arch/arm/boot/dts/imx6sx-udoo-neo-extended.dts | 54 +++++
|
||||
arch/arm/boot/dts/imx6sx-udoo-neo-full.dts | 69 ++++++
|
||||
arch/arm/boot/dts/imx6sx-udoo-neo.dtsi | 293 +++++++++++++++++++++++++
|
||||
5 files changed, 489 insertions(+), 1 deletion(-)
|
||||
create mode 100644 arch/arm/boot/dts/imx6sx-udoo-neo-basic.dts
|
||||
create mode 100644 arch/arm/boot/dts/imx6sx-udoo-neo-extended.dts
|
||||
create mode 100644 arch/arm/boot/dts/imx6sx-udoo-neo-full.dts
|
||||
create mode 100644 arch/arm/boot/dts/imx6sx-udoo-neo.dtsi
|
||||
|
||||
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
|
||||
index 019976b..da0197d 100644
|
||||
--- a/arch/arm/boot/dts/Makefile
|
||||
+++ b/arch/arm/boot/dts/Makefile
|
||||
@@ -417,7 +417,10 @@ dtb-$(CONFIG_SOC_IMX6SX) += \
|
||||
imx6sx-sabreauto.dtb \
|
||||
imx6sx-sdb-reva.dtb \
|
||||
imx6sx-sdb-sai.dtb \
|
||||
- imx6sx-sdb.dtb
|
||||
+ imx6sx-sdb.dtb \
|
||||
+ imx6sx-udoo-neo-basic.dtb \
|
||||
+ imx6sx-udoo-neo-extended.dtb \
|
||||
+ imx6sx-udoo-neo-full.dtb
|
||||
dtb-$(CONFIG_SOC_IMX6UL) += \
|
||||
imx6ul-14x14-evk.dtb \
|
||||
imx6ul-geam-kit.dtb \
|
||||
diff --git a/arch/arm/boot/dts/imx6sx-udoo-neo-basic.dts b/arch/arm/boot/dts/imx6sx-udoo-neo-basic.dts
|
||||
new file mode 100644
|
||||
index 0000000..0b88878
|
||||
--- /dev/null
|
||||
+++ b/arch/arm/boot/dts/imx6sx-udoo-neo-basic.dts
|
||||
@@ -0,0 +1,69 @@
|
||||
+/*
|
||||
+ * Copyright (c) 2016 Andreas Färber
|
||||
+ *
|
||||
+ * This file is dual-licensed: you can use it either under the terms
|
||||
+ * of the GPL or the X11 license, at your option. Note that this dual
|
||||
+ * licensing only applies to this file, and not this project as a
|
||||
+ * whole.
|
||||
+ *
|
||||
+ * a) This library is free software; you can redistribute it and/or
|
||||
+ * modify it under the terms of the GNU General Public License as
|
||||
+ * published by the Free Software Foundation; either version 2 of the
|
||||
+ * License, or (at your option) any later version.
|
||||
+ *
|
||||
+ * This library is distributed in the hope that it will be useful,
|
||||
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
+ * GNU General Public License for more details.
|
||||
+ *
|
||||
+ * Or, alternatively,
|
||||
+ *
|
||||
+ * b) Permission is hereby granted, free of charge, to any person
|
||||
+ * obtaining a copy of this software and associated documentation
|
||||
+ * files (the "Software"), to deal in the Software without
|
||||
+ * restriction, including without limitation the rights to use,
|
||||
+ * copy, modify, merge, publish, distribute, sublicense, and/or
|
||||
+ * sell copies of the Software, and to permit persons to whom the
|
||||
+ * Software is furnished to do so, subject to the following
|
||||
+ * conditions:
|
||||
+ *
|
||||
+ * The above copyright notice and this permission notice shall be
|
||||
+ * included in all copies or substantial portions of the Software.
|
||||
+ *
|
||||
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
|
||||
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
|
||||
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
||||
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
|
||||
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
|
||||
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
||||
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
|
||||
+ * OTHER DEALINGS IN THE SOFTWARE.
|
||||
+ */
|
||||
+
|
||||
+/dts-v1/;
|
||||
+
|
||||
+#include "imx6sx-udoo-neo.dtsi"
|
||||
+
|
||||
+/ {
|
||||
+ model = "UDOO Neo Basic";
|
||||
+ compatible = "fsl,imx6sx";
|
||||
+
|
||||
+ memory {
|
||||
+ reg = <0x80000000 0x20000000>;
|
||||
+ };
|
||||
+};
|
||||
+
|
||||
+&fec1 {
|
||||
+ phy-handle = <ðphy1>;
|
||||
+ status = "okay";
|
||||
+
|
||||
+ mdio {
|
||||
+ #address-cells = <1>;
|
||||
+ #size-cells = <0>;
|
||||
+
|
||||
+ ethphy1: ethernet-phy@0 {
|
||||
+ compatible = "ethernet-phy-ieee802.3-c22";
|
||||
+ reg = <0>;
|
||||
+ };
|
||||
+ };
|
||||
+};
|
||||
diff --git a/arch/arm/boot/dts/imx6sx-udoo-neo-extended.dts b/arch/arm/boot/dts/imx6sx-udoo-neo-extended.dts
|
||||
new file mode 100644
|
||||
index 0000000..d6fdd17
|
||||
--- /dev/null
|
||||
+++ b/arch/arm/boot/dts/imx6sx-udoo-neo-extended.dts
|
||||
@@ -0,0 +1,54 @@
|
||||
+/*
|
||||
+ * Copyright (c) 2016 Andreas Färber
|
||||
+ *
|
||||
+ * This file is dual-licensed: you can use it either under the terms
|
||||
+ * of the GPL or the X11 license, at your option. Note that this dual
|
||||
+ * licensing only applies to this file, and not this project as a
|
||||
+ * whole.
|
||||
+ *
|
||||
+ * a) This library is free software; you can redistribute it and/or
|
||||
+ * modify it under the terms of the GNU General Public License as
|
||||
+ * published by the Free Software Foundation; either version 2 of the
|
||||
+ * License, or (at your option) any later version.
|
||||
+ *
|
||||
+ * This library is distributed in the hope that it will be useful,
|
||||
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
+ * GNU General Public License for more details.
|
||||
+ *
|
||||
+ * Or, alternatively,
|
||||
+ *
|
||||
+ * b) Permission is hereby granted, free of charge, to any person
|
||||
+ * obtaining a copy of this software and associated documentation
|
||||
+ * files (the "Software"), to deal in the Software without
|
||||
+ * restriction, including without limitation the rights to use,
|
||||
+ * copy, modify, merge, publish, distribute, sublicense, and/or
|
||||
+ * sell copies of the Software, and to permit persons to whom the
|
||||
+ * Software is furnished to do so, subject to the following
|
||||
+ * conditions:
|
||||
+ *
|
||||
+ * The above copyright notice and this permission notice shall be
|
||||
+ * included in all copies or substantial portions of the Software.
|
||||
+ *
|
||||
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
|
||||
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
|
||||
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
||||
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
|
||||
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
|
||||
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
||||
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
|
||||
+ * OTHER DEALINGS IN THE SOFTWARE.
|
||||
+ */
|
||||
+
|
||||
+/dts-v1/;
|
||||
+
|
||||
+#include "imx6sx-udoo-neo.dtsi"
|
||||
+
|
||||
+/ {
|
||||
+ model = "UDOO Neo Extended";
|
||||
+ compatible = "fsl,imx6sx";
|
||||
+
|
||||
+ memory {
|
||||
+ reg = <0x80000000 0x40000000>;
|
||||
+ };
|
||||
+};
|
||||
diff --git a/arch/arm/boot/dts/imx6sx-udoo-neo-full.dts b/arch/arm/boot/dts/imx6sx-udoo-neo-full.dts
|
||||
new file mode 100644
|
||||
index 0000000..d8c3577
|
||||
--- /dev/null
|
||||
+++ b/arch/arm/boot/dts/imx6sx-udoo-neo-full.dts
|
||||
@@ -0,0 +1,69 @@
|
||||
+/*
|
||||
+ * Copyright (c) 2016 Andreas Färber
|
||||
+ *
|
||||
+ * This file is dual-licensed: you can use it either under the terms
|
||||
+ * of the GPL or the X11 license, at your option. Note that this dual
|
||||
+ * licensing only applies to this file, and not this project as a
|
||||
+ * whole.
|
||||
+ *
|
||||
+ * a) This library is free software; you can redistribute it and/or
|
||||
+ * modify it under the terms of the GNU General Public License as
|
||||
+ * published by the Free Software Foundation; either version 2 of the
|
||||
+ * License, or (at your option) any later version.
|
||||
+ *
|
||||
+ * This library is distributed in the hope that it will be useful,
|
||||
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
+ * GNU General Public License for more details.
|
||||
+ *
|
||||
+ * Or, alternatively,
|
||||
+ *
|
||||
+ * b) Permission is hereby granted, free of charge, to any person
|
||||
+ * obtaining a copy of this software and associated documentation
|
||||
+ * files (the "Software"), to deal in the Software without
|
||||
+ * restriction, including without limitation the rights to use,
|
||||
+ * copy, modify, merge, publish, distribute, sublicense, and/or
|
||||
+ * sell copies of the Software, and to permit persons to whom the
|
||||
+ * Software is furnished to do so, subject to the following
|
||||
+ * conditions:
|
||||
+ *
|
||||
+ * The above copyright notice and this permission notice shall be
|
||||
+ * included in all copies or substantial portions of the Software.
|
||||
+ *
|
||||
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
|
||||
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
|
||||
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
||||
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
|
||||
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
|
||||
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
||||
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
|
||||
+ * OTHER DEALINGS IN THE SOFTWARE.
|
||||
+ */
|
||||
+
|
||||
+/dts-v1/;
|
||||
+
|
||||
+#include "imx6sx-udoo-neo.dtsi"
|
||||
+
|
||||
+/ {
|
||||
+ model = "UDOO Neo Full";
|
||||
+ compatible = "fsl,imx6sx";
|
||||
+
|
||||
+ memory {
|
||||
+ reg = <0x80000000 0x40000000>;
|
||||
+ };
|
||||
+};
|
||||
+
|
||||
+&fec1 {
|
||||
+ phy-handle = <ðphy1>;
|
||||
+ status = "okay";
|
||||
+
|
||||
+ mdio {
|
||||
+ #address-cells = <1>;
|
||||
+ #size-cells = <0>;
|
||||
+
|
||||
+ ethphy1: ethernet-phy@0 {
|
||||
+ compatible = "ethernet-phy-ieee802.3-c22";
|
||||
+ reg = <0>;
|
||||
+ };
|
||||
+ };
|
||||
+};
|
||||
diff --git a/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi b/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi
|
||||
new file mode 100644
|
||||
index 0000000..2b65d26
|
||||
--- /dev/null
|
||||
+++ b/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi
|
||||
@@ -0,0 +1,293 @@
|
||||
+/*
|
||||
+ * Copyright (c) 2016 Andreas Färber
|
||||
+ *
|
||||
+ * This file is dual-licensed: you can use it either under the terms
|
||||
+ * of the GPL or the X11 license, at your option. Note that this dual
|
||||
+ * licensing only applies to this file, and not this project as a
|
||||
+ * whole.
|
||||
+ *
|
||||
+ * a) This library is free software; you can redistribute it and/or
|
||||
+ * modify it under the terms of the GNU General Public License as
|
||||
+ * published by the Free Software Foundation; either version 2 of the
|
||||
+ * License, or (at your option) any later version.
|
||||
+ *
|
||||
+ * This library is distributed in the hope that it will be useful,
|
||||
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
+ * GNU General Public License for more details.
|
||||
+ *
|
||||
+ * Or, alternatively,
|
||||
+ *
|
||||
+ * b) Permission is hereby granted, free of charge, to any person
|
||||
+ * obtaining a copy of this software and associated documentation
|
||||
+ * files (the "Software"), to deal in the Software without
|
||||
+ * restriction, including without limitation the rights to use,
|
||||
+ * copy, modify, merge, publish, distribute, sublicense, and/or
|
||||
+ * sell copies of the Software, and to permit persons to whom the
|
||||
+ * Software is furnished to do so, subject to the following
|
||||
+ * conditions:
|
||||
+ *
|
||||
+ * The above copyright notice and this permission notice shall be
|
||||
+ * included in all copies or substantial portions of the Software.
|
||||
+ *
|
||||
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
|
||||
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
|
||||
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
||||
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
|
||||
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
|
||||
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
||||
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
|
||||
+ * OTHER DEALINGS IN THE SOFTWARE.
|
||||
+ */
|
||||
+
|
||||
+#include "imx6sx.dtsi"
|
||||
+
|
||||
+/ {
|
||||
+ compatible = "fsl,imx6sx";
|
||||
+
|
||||
+ chosen {
|
||||
+ stdout-path = "serial0:115200n8";
|
||||
+ };
|
||||
+
|
||||
+ leds {
|
||||
+ compatible = "gpio-leds";
|
||||
+
|
||||
+ red {
|
||||
+ label = "udoo-neo:red:mmc";
|
||||
+ gpios = <&gpio6 0 GPIO_ACTIVE_HIGH>;
|
||||
+ default-state = "off";
|
||||
+ linux,default-trigger = "mmc0";
|
||||
+ };
|
||||
+
|
||||
+ orange {
|
||||
+ label = "udoo-neo:orange:user";
|
||||
+ gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>;
|
||||
+ default-state = "keep";
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ reg_sdio_pwr: regulator-sdio-pwr {
|
||||
+ compatible = "regulator-fixed";
|
||||
+ gpio = <&gpio6 1 GPIO_ACTIVE_HIGH>;
|
||||
+ enable-active-high;
|
||||
+ regulator-name = "SDIO_PWR";
|
||||
+ regulator-min-microvolt = <3300000>;
|
||||
+ regulator-max-microvolt = <3300000>;
|
||||
+ regulator-boot-on;
|
||||
+ };
|
||||
+};
|
||||
+
|
||||
+&cpu0 {
|
||||
+ arm-supply = <&sw1a_reg>;
|
||||
+ soc-supply = <&sw1c_reg>;
|
||||
+};
|
||||
+
|
||||
+&fec1 {
|
||||
+ pinctrl-names = "default";
|
||||
+ pinctrl-0 = <&pinctrl_enet1>;
|
||||
+ phy-mode = "rmii";
|
||||
+ phy-reset-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
|
||||
+};
|
||||
+
|
||||
+&i2c1 {
|
||||
+ pinctrl-names = "default";
|
||||
+ pinctrl-0 = <&pinctrl_i2c1>;
|
||||
+ clock-frequency = <100000>;
|
||||
+ status = "okay";
|
||||
+
|
||||
+ pmic: pmic@08 {
|
||||
+ compatible = "fsl,pfuze3000";
|
||||
+ reg = <0x08>;
|
||||
+
|
||||
+ regulators {
|
||||
+ sw1a_reg: sw1a {
|
||||
+ regulator-min-microvolt = <700000>;
|
||||
+ regulator-max-microvolt = <1475000>;
|
||||
+ regulator-boot-on;
|
||||
+ regulator-always-on;
|
||||
+ regulator-ramp-delay = <6250>;
|
||||
+ };
|
||||
+
|
||||
+ sw1c_reg: sw1b {
|
||||
+ regulator-min-microvolt = <700000>;
|
||||
+ regulator-max-microvolt = <1475000>;
|
||||
+ regulator-boot-on;
|
||||
+ regulator-always-on;
|
||||
+ regulator-ramp-delay = <6250>;
|
||||
+ };
|
||||
+
|
||||
+ sw2_reg: sw2 {
|
||||
+ regulator-min-microvolt = <1500000>;
|
||||
+ regulator-max-microvolt = <1850000>;
|
||||
+ regulator-boot-on;
|
||||
+ regulator-always-on;
|
||||
+ };
|
||||
+
|
||||
+ sw3a_reg: sw3 {
|
||||
+ regulator-min-microvolt = <900000>;
|
||||
+ regulator-max-microvolt = <1650000>;
|
||||
+ regulator-boot-on;
|
||||
+ regulator-always-on;
|
||||
+ };
|
||||
+
|
||||
+ swbst_reg: swbst {
|
||||
+ regulator-min-microvolt = <5000000>;
|
||||
+ regulator-max-microvolt = <5150000>;
|
||||
+ };
|
||||
+
|
||||
+ snvs_reg: vsnvs {
|
||||
+ regulator-min-microvolt = <1000000>;
|
||||
+ regulator-max-microvolt = <3000000>;
|
||||
+ regulator-boot-on;
|
||||
+ regulator-always-on;
|
||||
+ };
|
||||
+
|
||||
+ vref_reg: vrefddr {
|
||||
+ regulator-boot-on;
|
||||
+ regulator-always-on;
|
||||
+ };
|
||||
+
|
||||
+ vgen1_reg: vldo1 {
|
||||
+ regulator-min-microvolt = <1800000>;
|
||||
+ regulator-max-microvolt = <3300000>;
|
||||
+ regulator-always-on;
|
||||
+ };
|
||||
+
|
||||
+ vgen2_reg: vldo2 {
|
||||
+ regulator-min-microvolt = <800000>;
|
||||
+ regulator-max-microvolt = <1550000>;
|
||||
+ };
|
||||
+
|
||||
+ vgen3_reg: vccsd {
|
||||
+ regulator-min-microvolt = <2850000>;
|
||||
+ regulator-max-microvolt = <3300000>;
|
||||
+ regulator-always-on;
|
||||
+ };
|
||||
+
|
||||
+ vgen4_reg: v33 {
|
||||
+ regulator-min-microvolt = <2850000>;
|
||||
+ regulator-max-microvolt = <3300000>;
|
||||
+ regulator-always-on;
|
||||
+ };
|
||||
+
|
||||
+ vgen5_reg: vldo3 {
|
||||
+ regulator-min-microvolt = <1800000>;
|
||||
+ regulator-max-microvolt = <3300000>;
|
||||
+ regulator-always-on;
|
||||
+ };
|
||||
+
|
||||
+ vgen6_reg: vldo4 {
|
||||
+ regulator-min-microvolt = <1800000>;
|
||||
+ regulator-max-microvolt = <3300000>;
|
||||
+ regulator-always-on;
|
||||
+ };
|
||||
+ };
|
||||
+ };
|
||||
+};
|
||||
+
|
||||
+&iomuxc {
|
||||
+ pinctrl_enet1: enet1grp {
|
||||
+ fsl,pins =
|
||||
+ <MX6SX_PAD_ENET1_CRS__GPIO2_IO_1 0xa0b1>,
|
||||
+ <MX6SX_PAD_ENET1_MDC__ENET1_MDC 0xa0b1>,
|
||||
+ <MX6SX_PAD_ENET1_MDIO__ENET1_MDIO 0xa0b1>,
|
||||
+ <MX6SX_PAD_RGMII1_TD0__ENET1_TX_DATA_0 0xa0b1>,
|
||||
+ <MX6SX_PAD_RGMII1_TD1__ENET1_TX_DATA_1 0xa0b1>,
|
||||
+ <MX6SX_PAD_RGMII1_TX_CTL__ENET1_TX_EN 0xa0b1>,
|
||||
+
|
||||
+ <MX6SX_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x3081>,
|
||||
+ <MX6SX_PAD_ENET2_TX_CLK__GPIO2_IO_9 0x3081>,
|
||||
+ <MX6SX_PAD_RGMII1_RD0__ENET1_RX_DATA_0 0x3081>,
|
||||
+ <MX6SX_PAD_RGMII1_RD1__ENET1_RX_DATA_1 0x3081>,
|
||||
+ <MX6SX_PAD_RGMII1_RX_CTL__ENET1_RX_EN 0x3081>,
|
||||
+ <MX6SX_PAD_RGMII1_RXC__ENET1_RX_ER 0x3081>,
|
||||
+
|
||||
+ <MX6SX_PAD_ENET2_RX_CLK__ENET2_REF_CLK_25M 0x91>;
|
||||
+ };
|
||||
+
|
||||
+ pinctrl_i2c1: i2c1grp {
|
||||
+ fsl,pins =
|
||||
+ <MX6SX_PAD_GPIO1_IO00__I2C1_SCL 0x4001b8b1>,
|
||||
+ <MX6SX_PAD_GPIO1_IO01__I2C1_SDA 0x4001b8b1>;
|
||||
+ };
|
||||
+
|
||||
+ pinctrl_uart1: uart1grp {
|
||||
+ fsl,pins =
|
||||
+ <MX6SX_PAD_GPIO1_IO04__UART1_TX 0x1b0b1>,
|
||||
+ <MX6SX_PAD_GPIO1_IO05__UART1_RX 0x1b0b1>;
|
||||
+ };
|
||||
+
|
||||
+ pinctrl_uart2: uart2grp {
|
||||
+ fsl,pins =
|
||||
+ <MX6SX_PAD_GPIO1_IO06__UART2_TX 0x1b0b1>,
|
||||
+ <MX6SX_PAD_GPIO1_IO07__UART2_RX 0x1b0b1>;
|
||||
+ };
|
||||
+
|
||||
+ pinctrl_uart5: uart5grp {
|
||||
+ fsl,pins =
|
||||
+ <MX6SX_PAD_SD4_DATA4__UART5_RX 0x1b0b1>,
|
||||
+ <MX6SX_PAD_SD4_DATA5__UART5_TX 0x1b0b1>;
|
||||
+ };
|
||||
+
|
||||
+ pinctrl_uart6: uart6grp {
|
||||
+ fsl,pins =
|
||||
+ <MX6SX_PAD_CSI_DATA00__UART6_RI_B 0x1b0b1>,
|
||||
+ <MX6SX_PAD_CSI_DATA01__UART6_DSR_B 0x1b0b1>,
|
||||
+ <MX6SX_PAD_CSI_DATA02__UART6_DTR_B 0x1b0b1>,
|
||||
+ <MX6SX_PAD_CSI_DATA03__UART6_DCD_B 0x1b0b1>,
|
||||
+ <MX6SX_PAD_CSI_DATA04__UART6_RX 0x1b0b1>,
|
||||
+ <MX6SX_PAD_CSI_DATA05__UART6_TX 0x1b0b1>,
|
||||
+ <MX6SX_PAD_CSI_DATA06__UART6_RTS_B 0x1b0b1>,
|
||||
+ <MX6SX_PAD_CSI_DATA07__UART6_CTS_B 0x1b0b1>;
|
||||
+ };
|
||||
+
|
||||
+ pinctrl_usdhc2: usdhc2grp {
|
||||
+ fsl,pins =
|
||||
+ <MX6SX_PAD_SD2_CMD__USDHC2_CMD 0x17059>,
|
||||
+ <MX6SX_PAD_SD2_CLK__USDHC2_CLK 0x10059>,
|
||||
+ <MX6SX_PAD_SD2_DATA0__USDHC2_DATA0 0x17059>,
|
||||
+ <MX6SX_PAD_SD2_DATA1__USDHC2_DATA1 0x17059>,
|
||||
+ <MX6SX_PAD_SD2_DATA2__USDHC2_DATA2 0x17059>,
|
||||
+ <MX6SX_PAD_SD2_DATA3__USDHC2_DATA3 0x17059>,
|
||||
+ <MX6SX_PAD_SD1_DATA0__GPIO6_IO_2 0x17059>; /* CD */
|
||||
+ };
|
||||
+};
|
||||
+
|
||||
+&uart1 {
|
||||
+ pinctrl-names = "default";
|
||||
+ pinctrl-0 = <&pinctrl_uart1>;
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+/* Cortex-M4 serial */
|
||||
+&uart2 {
|
||||
+ pinctrl-names = "default";
|
||||
+ pinctrl-0 = <&pinctrl_uart2>;
|
||||
+ status = "disabled";
|
||||
+};
|
||||
+
|
||||
+/* Arduino serial */
|
||||
+&uart5 {
|
||||
+ pinctrl-names = "default";
|
||||
+ pinctrl-0 = <&pinctrl_uart5>;
|
||||
+ status = "disabled";
|
||||
+};
|
||||
+
|
||||
+&uart6 {
|
||||
+ pinctrl-names = "default";
|
||||
+ pinctrl-0 = <&pinctrl_uart6>;
|
||||
+ uart-has-rtscts;
|
||||
+ status = "disabled";
|
||||
+};
|
||||
+
|
||||
+&usdhc2 {
|
||||
+ pinctrl-names = "default";
|
||||
+ pinctrl-0 = <&pinctrl_usdhc2>;
|
||||
+ vmmc-supply = <®_sdio_pwr>;
|
||||
+ bus-width = <4>;
|
||||
+ cd-gpios = <&gpio6 2 GPIO_ACTIVE_LOW>;
|
||||
+ no-1-8-v;
|
||||
+ keep-power-in-suspend;
|
||||
+ wakeup-source;
|
||||
+ status = "okay";
|
||||
+};
|
||||
--
|
||||
cgit v0.12
|
|
@ -3,11 +3,10 @@ BR2_cortex_a9=y
|
|||
BR2_ARM_ENABLE_NEON=y
|
||||
BR2_ARM_ENABLE_VFP=y
|
||||
BR2_ARM_FPU_VFPV3=y
|
||||
# Linux headers same as kernel, a 4.9 series
|
||||
BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
|
||||
# Linux headers same as kernel, a 4.10 series
|
||||
BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_10=y
|
||||
BR2_ROOTFS_POST_BUILD_SCRIPT="board/udoo/neo/post-build.sh"
|
||||
BR2_ROOTFS_POST_IMAGE_SCRIPT="board/udoo/neo/post-image.sh"
|
||||
BR2_GLOBAL_PATCH_DIR="board/udoo/neo/patches"
|
||||
BR2_TARGET_ROOTFS_EXT2=y
|
||||
BR2_TARGET_ROOTFS_EXT2_4=y
|
||||
BR2_TARGET_UBOOT=y
|
||||
|
@ -19,7 +18,7 @@ BR2_TARGET_UBOOT_SPL=y
|
|||
BR2_TARGET_UBOOT_SPL_NAME="SPL"
|
||||
BR2_LINUX_KERNEL=y
|
||||
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
|
||||
BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9"
|
||||
BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.10"
|
||||
BR2_LINUX_KERNEL_DEFCONFIG="imx_v6_v7"
|
||||
BR2_LINUX_KERNEL_DTS_SUPPORT=y
|
||||
BR2_LINUX_KERNEL_INTREE_DTS_NAME="imx6sx-udoo-neo-basic imx6sx-udoo-neo-full imx6sx-udoo-neo-extended"
|
||||
|
|
Loading…
Reference in a new issue