configs/rock_pi_4: remove defconfig
This defconfig has been failing to build for several months, with nobody stepping up to fix it. It's time to drop it. See https://lore.kernel.org/buildroot/20220806224338.0159e15c@windsurf/ for a notification on August 6, 2022 about the issues with this defconfig. Fixes: https://gitlab.com/buildroot.org/buildroot/-/jobs/3259671395 Cc: Suniel Mahesh <sunil@amarulasolutions.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This commit is contained in:
parent
5370ec7451
commit
707938d684
|
@ -2730,10 +2730,8 @@ F: package/powertop/
|
|||
N: Suniel Mahesh <sunil@amarulasolutions.com>
|
||||
F: board/friendlyarm/nanopi-m4
|
||||
F: board/pine64/rockpro64
|
||||
F: board/radxa/rockpi-4
|
||||
F: board/radxa/rockpi-n8
|
||||
F: board/radxa/rockpi-n10
|
||||
F: configs/rock_pi_4_defconfig
|
||||
F: configs/rock_pi_n8_defconfig
|
||||
F: configs/rock_pi_n10_defconfig
|
||||
F: configs/rockpro64_defconfig
|
||||
|
|
|
@ -1,4 +0,0 @@
|
|||
label RK3399_ROCK_PI_4 linux
|
||||
kernel /Image
|
||||
devicetree /rk3399-rock-pi-4.dtb
|
||||
append earlycon=uart8250,mmio32,0xff1a0000 root=/dev/mmcblk1p4 rw rootwait
|
|
@ -1,39 +0,0 @@
|
|||
image boot.vfat {
|
||||
vfat {
|
||||
files = {
|
||||
"Image",
|
||||
"rk3399-rock-pi-4.dtb",
|
||||
"extlinux"
|
||||
}
|
||||
}
|
||||
|
||||
size = 112M
|
||||
}
|
||||
|
||||
image sdcard.img {
|
||||
hdimage {
|
||||
partition-table-type = "gpt"
|
||||
}
|
||||
|
||||
partition loader1 {
|
||||
image = "idbloader.img"
|
||||
offset = 32K
|
||||
}
|
||||
|
||||
partition loader2 {
|
||||
image = "u-boot.itb"
|
||||
offset = 8M
|
||||
}
|
||||
|
||||
partition boot {
|
||||
partition-type-uuid = F
|
||||
bootable = "true"
|
||||
image = "boot.vfat"
|
||||
offset = 16M
|
||||
}
|
||||
|
||||
partition rootfs {
|
||||
partition-type-uuid = b921b045-1df0-41c3-af44-4c6f280d3fae
|
||||
image = "rootfs.ext4"
|
||||
}
|
||||
}
|
|
@ -1,5 +0,0 @@
|
|||
#!/bin/sh
|
||||
|
||||
BOARD_DIR="$(dirname $0)"
|
||||
|
||||
install -m 0644 -D $BOARD_DIR/extlinux.conf $BINARIES_DIR/extlinux/extlinux.conf
|
|
@ -1,61 +0,0 @@
|
|||
RADXA ROCK_PI_4
|
||||
================
|
||||
https://rockpi.org/rockpi4
|
||||
|
||||
ROCK Pi 4 is a Single Board Computer (SBC) from radxa. This guide is valid
|
||||
for the below models:
|
||||
- ROCK PI 4 Model A
|
||||
- ROCK PI 4 Model B
|
||||
- ROCK PI 4 Model C
|
||||
|
||||
Build:
|
||||
======
|
||||
$ make rock_pi_4_defconfig
|
||||
$ make
|
||||
|
||||
Files created in output directory
|
||||
=================================
|
||||
|
||||
output/images
|
||||
|
||||
├── bl31.elf
|
||||
├── boot.vfat
|
||||
├── extlinux
|
||||
├── idbloader.img
|
||||
├── Image
|
||||
├── rk3399-rock-pi-4.dtb
|
||||
├── rootfs.ext2
|
||||
├── rootfs.ext4 -> rootfs.ext2
|
||||
├── rootfs.tar
|
||||
├── sdcard.img
|
||||
├── u-boot.bin
|
||||
└── u-boot.itb
|
||||
|
||||
Creating bootable SD card:
|
||||
==========================
|
||||
|
||||
Simply invoke (as root)
|
||||
|
||||
sudo dd if=output/images/sdcard.img of=/dev/sdX && sync
|
||||
|
||||
Where X is your SD card device.
|
||||
|
||||
Booting:
|
||||
========
|
||||
|
||||
Serial console:
|
||||
---------------
|
||||
RockPi4 has a 40-pin GPIO header. The pin layout is as follows:
|
||||
|
||||
pin 6: gnd
|
||||
pin 8: tx
|
||||
pin 10: rx
|
||||
|
||||
Baudrate for this board is 1500000.
|
||||
|
||||
Login:
|
||||
------
|
||||
Enter 'root' as login user, and the prompt is ready.
|
||||
|
||||
Wiki link:
|
||||
https://wiki.amarulasolutions.com/bsp/rockchip/rk3399/rock-pi-4.html
|
|
@ -1,55 +0,0 @@
|
|||
# Architecture
|
||||
BR2_aarch64=y
|
||||
BR2_cortex_a72_a53=y
|
||||
|
||||
# Linux headers same as kernel, a 5.4 series
|
||||
BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_4=y
|
||||
|
||||
# Firmware
|
||||
BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
|
||||
BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_GIT=y
|
||||
BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_URL="https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git"
|
||||
BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_VERSION="11a0a46a899fcc3b1fdb214b382f3d7495d88eca"
|
||||
BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="rk3399"
|
||||
BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31=y
|
||||
BR2_TARGET_ARM_TRUSTED_FIRMWARE_NEEDS_ARM32_TOOLCHAIN=y
|
||||
BR2_TARGET_ARM_TRUSTED_FIRMWARE_IMAGES=""
|
||||
|
||||
# Bootloader
|
||||
BR2_TARGET_UBOOT=y
|
||||
BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
|
||||
BR2_TARGET_UBOOT_CUSTOM_GIT=y
|
||||
BR2_TARGET_UBOOT_CUSTOM_REPO_URL="https://github.com/amarula/u-boot-amarula.git"
|
||||
BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="cf2747360fdd1eb0d51dd01a984c7c62c7f714fe"
|
||||
BR2_TARGET_UBOOT_BOARD_DEFCONFIG="rock-pi-4-rk3399"
|
||||
BR2_TARGET_UBOOT_NEEDS_DTC=y
|
||||
BR2_TARGET_UBOOT_NEEDS_PYTHON3=y
|
||||
BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y
|
||||
BR2_TARGET_UBOOT_NEEDS_ATF_BL31_ELF=y
|
||||
BR2_TARGET_UBOOT_FORMAT_CUSTOM=y
|
||||
BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot.itb"
|
||||
BR2_TARGET_UBOOT_SPL=y
|
||||
BR2_TARGET_UBOOT_SPL_NAME="idbloader.img"
|
||||
|
||||
# Kernel
|
||||
BR2_LINUX_KERNEL=y
|
||||
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
|
||||
BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.4.46"
|
||||
BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y
|
||||
BR2_LINUX_KERNEL_DTS_SUPPORT=y
|
||||
BR2_LINUX_KERNEL_INTREE_DTS_NAME="rockchip/rk3399-rock-pi-4"
|
||||
BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
|
||||
|
||||
# Filesystem
|
||||
BR2_TARGET_GENERIC_HOSTNAME="rockpi4"
|
||||
BR2_TARGET_GENERIC_ISSUE="Welcome to ROCK_PI_4"
|
||||
BR2_TARGET_ROOTFS_EXT2=y
|
||||
BR2_TARGET_ROOTFS_EXT2_4=y
|
||||
BR2_TARGET_ROOTFS_EXT2_SIZE="96M"
|
||||
BR2_PACKAGE_HOST_DOSFSTOOLS=y
|
||||
BR2_PACKAGE_HOST_GENIMAGE=y
|
||||
BR2_PACKAGE_HOST_MTOOLS=y
|
||||
BR2_PACKAGE_HOST_UBOOT_TOOLS=y
|
||||
BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
|
||||
BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/radxa/rockpi-4/genimage.cfg"
|
||||
BR2_ROOTFS_POST_BUILD_SCRIPT="board/radxa/rockpi-4/post-build.sh"
|
Loading…
Reference in a new issue