From 8766453dada87b3f0f6995dd1a2a2ebf32616bd9 Mon Sep 17 00:00:00 2001 From: Vivien Didelot Date: Tue, 23 Dec 2014 10:24:56 -0500 Subject: [PATCH] ts5x00: remember to set the active flag Signed-off-by: Vivien Didelot Signed-off-by: Thomas Petazzoni --- board/ts/ts5x00/readme.txt | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/board/ts/ts5x00/readme.txt b/board/ts/ts5x00/readme.txt index a1d919ee0e..1e50682980 100644 --- a/board/ts/ts5x00/readme.txt +++ b/board/ts/ts5x00/readme.txt @@ -43,7 +43,8 @@ Then install SYSLINUX in the mounted partition: IMPORTANT: In order for the board to boot the Compact Flash with a recent config, the BIOS must use Logical Block Addressing (LBA). You can do it by choosing "Ide 0: AUTOCONFIG, LBA" under "IDE DRIVE GEOMETRY" in the "Basic CMOS -Configuration" screen. For details about the CMOS setup, please see: +Configuration" screen. Also, don't forget to set the 'active' (or 'bootable') +flag on partition 1. For details about the CMOS setup, please see: http://wiki.embeddedarm.com/wiki/TS-5500#System_BIOS_Setup_Screens Connect a terminal program to the rs232 connector marked "COM2"