configs/bananapi_m1_plus_defconfig: new defconfig

This commit adds support for Sinovoip's Banana Pi
M1+. It is mostly based on bananapro_defconfig
but with appropriate device tree and minor tweaks:

- apply bananapi-m1-plus device tree in linux
- apply bananapi_m1_plus defconfig for uboot
- apply patch for OOB IRQs on new device tree
- update device tree name in boot.cmd, genimage.cfg
- update symlink for BRCM driver in rootfs_overlay
- overall clean-up of the config

Tested on BPI-M1+ V1_1.

Signed-off-by: Filip Skoneczny <fskoneczny@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2021.05.x
Filip Skoneczny 2021-01-25 18:44:03 +01:00 committed by Thomas Petazzoni
parent 199bacb7b1
commit 9365c1de5b
10 changed files with 264 additions and 0 deletions

View File

@ -895,6 +895,10 @@ F: configs/freescale_imx6ullevk_defconfig
N: Falco Hyfing <hyfinglists@gmail.com>
F: package/python-pymodbus/
N: Filip Skoneczny <fskoneczny@gmail.com>
F: board/sinovoip/m1-plus
F: configs/bananapi_m1_plus_defconfig
N: Floris Bos <bos@je-eigen-domein.nl>
F: package/ipmitool/
F: package/odhcploc/

View File

@ -0,0 +1,5 @@
setenv fdt_high ffffffff
setenv bootargs console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait
fatload mmc 0 $kernel_addr_r zImage
fatload mmc 0 $fdt_addr_r sun7i-a20-bananapi-m1-plus.dtb
bootz $kernel_addr_r - $fdt_addr_r

View File

@ -0,0 +1,37 @@
# Minimal SD card image for the Banana Pi M1+
# Based on the Banana Pro genimage.cfg
image boot.vfat {
vfat {
files = {
"zImage",
"sun7i-a20-bananapi-m1-plus.dtb",
"boot.scr"
}
}
size = 10M
}
image sdcard.img {
hdimage {
}
partition u-boot {
in-partition-table = "no"
image = "u-boot-sunxi-with-spl.bin"
offset = 8192
size = 1040384 # 1MB - 8192
}
partition boot {
partition-type = 0xC
bootable = "true"
image = "boot.vfat"
}
partition rootfs {
partition-type = 0x83
image = "rootfs.ext4"
size = 512M
}
}

View File

@ -0,0 +1,10 @@
# Networking support
CONFIG_WIRELESS=y
CONFIG_CFG80211=y
CONFIG_CFG80211_WEXT=y
CONFIG_RFKILL=y
# Network device support
CONFIG_WLAN=y
CONFIG_WLAN_VENDOR_BROADCOM=y
CONFIG_BRCMFMAC=m

View File

@ -0,0 +1,39 @@
From 58bae4096a7bf8d5d3bfbddb82cb37dd0561c938 Mon Sep 17 00:00:00 2001
From: Filip Skoneczny <fskoneczny@gmail.com>
Date: Sun, 10 Jan 2021 19:07:14 +0100
Subject: [PATCH] ARM: dts: sun7i: bananapi-m1-plus: Disable OOB IRQ for brcm
wifi module
Based on 23bc805.
BugLink: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=908438
Signed-off-by: Filip Skoneczny <fskoneczny@gmail.com>
---
arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts | 11 ++++++++---
1 file changed, 8 insertions(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts b/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts
index 32d5d45a35c0..97f9987f51d7 100644
--- a/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts
+++ b/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts
@@ -193,9 +193,14 @@ &mmc3 {
brcmf: wifi@1 {
reg = <1>;
compatible = "brcm,bcm4329-fmac";
- interrupt-parent = <&pio>;
- interrupts = <7 15 IRQ_TYPE_LEVEL_LOW>;
- interrupt-names = "host-wake";
+ /*
+ * OOB interrupt support is broken ATM, drv probe failing with:
+ * ieee80211 phy0: brcmf_attach: dongle is not responding: err=-110
+ *
+ * interrupt-parent = <&pio>;
+ * interrupts = <7 15 IRQ_TYPE_LEVEL_LOW>;
+ * interrupt-names = "host-wake";
+ */
};
};
--
2.25.1

View File

@ -0,0 +1,4 @@
#!/bin/sh
# Remove all but the brcmfmac43362 firmware files
find $TARGET_DIR/lib/firmware/brcm -type f -not -name "brcmfmac43362*" -delete

View File

@ -0,0 +1,64 @@
Banana Pi M1+
Intro
=====
This default configuration will allow you to start experimenting with the
Buildroot environment for the Banana Pi M1+. With the current configuration
it will bring-up the board, and allow access through the serial console.
How to build it
===============
Configure Buildroot:
$ make bananapi_m1_plus_defconfig
Compile everything and build the SD card image:
$ make
How to write the SD card
========================
Once the build process is finished you will have an image called "sdcard.img"
in the output/images/ directory.
Copy the bootable "sdcard.img" onto an SD card with "dd":
$ dd if=output/images/sdcard.img of=/dev/sdX
Notes:
- replace 'sdX' with the actual device with your micro SD card
- you may need to be root to do that (use 'sudo')
Insert the micro SD card in your Banana Pi M1+ and power it up. The console
is on the debug TTL UART, 115200 8N1.
Ethernet
==========
# udhcpc -i eth0
Wifi
==========
# wpa_passphrase YOUR_SSID >> /etc/wpa_supplicant.conf
(enter the wifi password and press enter)
# wpa_supplicant -i wlan0 -c /etc/wpa_supplicant.conf -B
# udhcpc -i wlan0
Note:
- replace 'YOUR_SSID' with the actual SSID from your access point
Audio
==========
For this example you need package alsa-utils.
Connect a headphone to the 3.5mm jack (TRRS). Note, that the Banana Pi M1+
has an on-board microphone, too.
# amixer cset name='Power Amplifier DAC Playback Switch' on
# amixer cset name='Power Amplifier Mute Switch' on
# amixer cset name='Power Amplifier Volume' 42

View File

@ -0,0 +1,56 @@
#AP6210_NVRAM_V1.2_03192013
manfid=0x2d0
prodid=0x492
vendid=0x14e4
devid=0x4343
boardtype=0x0598
# Board Revision is P307, same nvram file can be used for P304, P305, P306 and P307 as the tssi pa params used are same
#Please force the automatic RX PER data to the respective board directory if not using P307 board, for e.g. for P305 boards force the data into the following directory /projects/BCM43362/a1_labdata/boardtests/results/sdg_rev0305
boardrev=0x1307
boardnum=777
xtalfreq=26000
boardflags=0x80201
boardflags2=0x80
sromrev=3
wl0id=0x431b
macaddr=00:90:4c:07:71:12
aa2g=1
ag0=2
maxp2ga0=74
cck2gpo=0x2222
ofdm2gpo=0x44444444
mcs2gpo0=0x6666
mcs2gpo1=0x6666
pa0maxpwr=56
#P207 PA params
#pa0b0=5447
#pa0b1=-658
#pa0b2=-175
#Same PA params for P304,P305, P306, P307
pa0b0=5447
pa0b1=-607
pa0b2=-160
pa0itssit=62
pa1itssit=62
cckPwrOffset=5
ccode=0
rssismf2g=0xa
rssismc2g=0x3
rssisav2g=0x7
triso2g=0
noise_cal_enable_2g=0
noise_cal_po_2g=0
swctrlmap_2g=0x04040404,0x02020202,0x02020202,0x010101,0x1ff
temp_add=29767
temp_mult=425
btc_flags=0x6
btc_params0=5000
btc_params1=1000
btc_params6=63

View File

@ -0,0 +1,44 @@
BR2_arm=y
BR2_cortex_a7=y
BR2_ARM_FPU_NEON_VFPV4=y
BR2_GLOBAL_PATCH_DIR="board/sinovoip/m1-plus/patches"
BR2_TARGET_GENERIC_HOSTNAME="bananapi"
BR2_TARGET_GENERIC_ISSUE="Welcome to Banana Pi!"
BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_MDEV=y
BR2_TARGET_GENERIC_GETTY_PORT="ttyS0"
BR2_ROOTFS_OVERLAY="board/sinovoip/m1-plus/rootfs_overlay"
BR2_ROOTFS_POST_BUILD_SCRIPT="board/sinovoip/m1-plus/post-build.sh"
BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/sinovoip/m1-plus/genimage.cfg"
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.10.3"
BR2_LINUX_KERNEL_DEFCONFIG="sunxi"
BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/sinovoip/m1-plus/linux-wifi.fragment"
BR2_LINUX_KERNEL_DTS_SUPPORT=y
BR2_LINUX_KERNEL_INTREE_DTS_NAME="sun7i-a20-bananapi-m1-plus"
BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
BR2_PACKAGE_LINUX_FIRMWARE=y
BR2_PACKAGE_LINUX_FIRMWARE_BRCM_BCM43XXX=y
BR2_PACKAGE_IW=y
BR2_PACKAGE_WPA_SUPPLICANT=y
BR2_PACKAGE_WPA_SUPPLICANT_CLI=y
BR2_PACKAGE_WPA_SUPPLICANT_PASSPHRASE=y
BR2_TARGET_ROOTFS_EXT2=y
BR2_TARGET_ROOTFS_EXT2_4=y
# BR2_TARGET_ROOTFS_TAR is not set
BR2_TARGET_UBOOT=y
BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
BR2_TARGET_UBOOT_CUSTOM_VERSION=y
BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2019.10"
BR2_TARGET_UBOOT_BOARD_DEFCONFIG="bananapi_m1_plus"
BR2_TARGET_UBOOT_NEEDS_DTC=y
BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y
BR2_TARGET_UBOOT_SPL=y
BR2_TARGET_UBOOT_SPL_NAME="u-boot-sunxi-with-spl.bin"
BR2_PACKAGE_HOST_DOSFSTOOLS=y
BR2_PACKAGE_HOST_GENIMAGE=y
BR2_PACKAGE_HOST_MTOOLS=y
BR2_PACKAGE_HOST_UBOOT_TOOLS=y
BR2_PACKAGE_HOST_UBOOT_TOOLS_BOOT_SCRIPT=y
BR2_PACKAGE_HOST_UBOOT_TOOLS_BOOT_SCRIPT_SOURCE="board/sinovoip/m1-plus/boot.cmd"