configs/bananapi_m1_plus: remove defconfig
This defconfig has been failing to build for several months, with nobody stepping up to fix it. It's time to drop it. See https://lore.kernel.org/buildroot/20220806224338.0159e15c@windsurf/ for a notification on August 6, 2022 about the issues with this defconfig. Fixes: https://gitlab.com/buildroot.org/buildroot/-/jobs/3234499004 Cc: Filip Skoneczny <fskoneczny@gmail.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This commit is contained in:
parent
ef832cd855
commit
a086bd267f
|
@ -1004,10 +1004,6 @@ F: configs/freescale_imx6ullevk_defconfig
|
|||
N: Falco Hyfing <hyfinglists@gmail.com>
|
||||
F: package/python-pymodbus/
|
||||
|
||||
N: Filip Skoneczny <fskoneczny@gmail.com>
|
||||
F: board/sinovoip/m1-plus
|
||||
F: configs/bananapi_m1_plus_defconfig
|
||||
|
||||
N: Florian Fainelli <f.fainelli@gmail.com>
|
||||
F: package/cpulimit/
|
||||
|
||||
|
|
|
@ -1,5 +0,0 @@
|
|||
setenv fdt_high ffffffff
|
||||
setenv bootargs console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait
|
||||
fatload mmc 0 $kernel_addr_r zImage
|
||||
fatload mmc 0 $fdt_addr_r sun7i-a20-bananapi-m1-plus.dtb
|
||||
bootz $kernel_addr_r - $fdt_addr_r
|
|
@ -1,38 +0,0 @@
|
|||
# Minimal SD card image for the Banana Pi M1+
|
||||
# Based on the Banana Pro genimage.cfg
|
||||
|
||||
image boot.vfat {
|
||||
vfat {
|
||||
files = {
|
||||
"zImage",
|
||||
"sun7i-a20-bananapi-m1-plus.dtb",
|
||||
"boot.scr"
|
||||
}
|
||||
}
|
||||
|
||||
size = 10M
|
||||
}
|
||||
|
||||
image sdcard.img {
|
||||
hdimage {
|
||||
}
|
||||
|
||||
partition u-boot {
|
||||
in-partition-table = "no"
|
||||
image = "u-boot-sunxi-with-spl.bin"
|
||||
offset = 8K
|
||||
size = 1016K # 1MB - 8KB
|
||||
}
|
||||
|
||||
partition boot {
|
||||
partition-type = 0xC
|
||||
bootable = "true"
|
||||
image = "boot.vfat"
|
||||
}
|
||||
|
||||
partition rootfs {
|
||||
partition-type = 0x83
|
||||
image = "rootfs.ext4"
|
||||
size = 512M
|
||||
}
|
||||
}
|
|
@ -1,10 +0,0 @@
|
|||
# Networking support
|
||||
CONFIG_WIRELESS=y
|
||||
CONFIG_CFG80211=y
|
||||
CONFIG_CFG80211_WEXT=y
|
||||
CONFIG_RFKILL=y
|
||||
|
||||
# Network device support
|
||||
CONFIG_WLAN=y
|
||||
CONFIG_WLAN_VENDOR_BROADCOM=y
|
||||
CONFIG_BRCMFMAC=m
|
|
@ -1,39 +0,0 @@
|
|||
From 58bae4096a7bf8d5d3bfbddb82cb37dd0561c938 Mon Sep 17 00:00:00 2001
|
||||
From: Filip Skoneczny <fskoneczny@gmail.com>
|
||||
Date: Sun, 10 Jan 2021 19:07:14 +0100
|
||||
Subject: [PATCH] ARM: dts: sun7i: bananapi-m1-plus: Disable OOB IRQ for brcm
|
||||
wifi module
|
||||
|
||||
Based on 23bc805.
|
||||
BugLink: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=908438
|
||||
|
||||
Signed-off-by: Filip Skoneczny <fskoneczny@gmail.com>
|
||||
---
|
||||
arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts | 11 ++++++++---
|
||||
1 file changed, 8 insertions(+), 3 deletions(-)
|
||||
|
||||
diff --git a/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts b/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts
|
||||
index 32d5d45a35c0..97f9987f51d7 100644
|
||||
--- a/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts
|
||||
+++ b/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts
|
||||
@@ -193,9 +193,14 @@ &mmc3 {
|
||||
brcmf: wifi@1 {
|
||||
reg = <1>;
|
||||
compatible = "brcm,bcm4329-fmac";
|
||||
- interrupt-parent = <&pio>;
|
||||
- interrupts = <7 15 IRQ_TYPE_LEVEL_LOW>;
|
||||
- interrupt-names = "host-wake";
|
||||
+ /*
|
||||
+ * OOB interrupt support is broken ATM, drv probe failing with:
|
||||
+ * ieee80211 phy0: brcmf_attach: dongle is not responding: err=-110
|
||||
+ *
|
||||
+ * interrupt-parent = <&pio>;
|
||||
+ * interrupts = <7 15 IRQ_TYPE_LEVEL_LOW>;
|
||||
+ * interrupt-names = "host-wake";
|
||||
+ */
|
||||
};
|
||||
};
|
||||
|
||||
--
|
||||
2.25.1
|
||||
|
|
@ -1,4 +0,0 @@
|
|||
#!/bin/sh
|
||||
|
||||
# Remove all but the brcmfmac43362 firmware files
|
||||
find $TARGET_DIR/lib/firmware/brcm -type f -not -name "brcmfmac43362*" -delete
|
|
@ -1,64 +0,0 @@
|
|||
Banana Pi M1+
|
||||
|
||||
Intro
|
||||
=====
|
||||
|
||||
This default configuration will allow you to start experimenting with the
|
||||
Buildroot environment for the Banana Pi M1+. With the current configuration
|
||||
it will bring-up the board, and allow access through the serial console.
|
||||
|
||||
How to build it
|
||||
===============
|
||||
|
||||
Configure Buildroot:
|
||||
|
||||
$ make bananapi_m1_plus_defconfig
|
||||
|
||||
Compile everything and build the SD card image:
|
||||
|
||||
$ make
|
||||
|
||||
How to write the SD card
|
||||
========================
|
||||
|
||||
Once the build process is finished you will have an image called "sdcard.img"
|
||||
in the output/images/ directory.
|
||||
|
||||
Copy the bootable "sdcard.img" onto an SD card with "dd":
|
||||
|
||||
$ dd if=output/images/sdcard.img of=/dev/sdX
|
||||
|
||||
Notes:
|
||||
- replace 'sdX' with the actual device with your micro SD card
|
||||
- you may need to be root to do that (use 'sudo')
|
||||
|
||||
Insert the micro SD card in your Banana Pi M1+ and power it up. The console
|
||||
is on the debug TTL UART, 115200 8N1.
|
||||
|
||||
Ethernet
|
||||
==========
|
||||
|
||||
# udhcpc -i eth0
|
||||
|
||||
Wifi
|
||||
==========
|
||||
|
||||
# wpa_passphrase YOUR_SSID >> /etc/wpa_supplicant.conf
|
||||
(enter the wifi password and press enter)
|
||||
# wpa_supplicant -i wlan0 -c /etc/wpa_supplicant.conf -B
|
||||
# udhcpc -i wlan0
|
||||
|
||||
Note:
|
||||
- replace 'YOUR_SSID' with the actual SSID from your access point
|
||||
|
||||
Audio
|
||||
==========
|
||||
|
||||
For this example you need package alsa-utils.
|
||||
|
||||
Connect a headphone to the 3.5mm jack (TRRS). Note, that the Banana Pi M1+
|
||||
has an on-board microphone, too.
|
||||
|
||||
# amixer cset name='Power Amplifier DAC Playback Switch' on
|
||||
# amixer cset name='Power Amplifier Mute Switch' on
|
||||
# amixer cset name='Power Amplifier Volume' 42
|
|
@ -1 +0,0 @@
|
|||
brcmfmac43362-sdio.txt
|
|
@ -1,56 +0,0 @@
|
|||
#AP6210_NVRAM_V1.2_03192013
|
||||
manfid=0x2d0
|
||||
prodid=0x492
|
||||
vendid=0x14e4
|
||||
devid=0x4343
|
||||
boardtype=0x0598
|
||||
|
||||
# Board Revision is P307, same nvram file can be used for P304, P305, P306 and P307 as the tssi pa params used are same
|
||||
#Please force the automatic RX PER data to the respective board directory if not using P307 board, for e.g. for P305 boards force the data into the following directory /projects/BCM43362/a1_labdata/boardtests/results/sdg_rev0305
|
||||
boardrev=0x1307
|
||||
boardnum=777
|
||||
xtalfreq=26000
|
||||
boardflags=0x80201
|
||||
boardflags2=0x80
|
||||
sromrev=3
|
||||
wl0id=0x431b
|
||||
macaddr=00:90:4c:07:71:12
|
||||
aa2g=1
|
||||
ag0=2
|
||||
maxp2ga0=74
|
||||
cck2gpo=0x2222
|
||||
ofdm2gpo=0x44444444
|
||||
mcs2gpo0=0x6666
|
||||
mcs2gpo1=0x6666
|
||||
pa0maxpwr=56
|
||||
|
||||
#P207 PA params
|
||||
#pa0b0=5447
|
||||
#pa0b1=-658
|
||||
#pa0b2=-175
|
||||
|
||||
#Same PA params for P304,P305, P306, P307
|
||||
|
||||
pa0b0=5447
|
||||
pa0b1=-607
|
||||
pa0b2=-160
|
||||
pa0itssit=62
|
||||
pa1itssit=62
|
||||
|
||||
|
||||
cckPwrOffset=5
|
||||
ccode=0
|
||||
rssismf2g=0xa
|
||||
rssismc2g=0x3
|
||||
rssisav2g=0x7
|
||||
triso2g=0
|
||||
noise_cal_enable_2g=0
|
||||
noise_cal_po_2g=0
|
||||
swctrlmap_2g=0x04040404,0x02020202,0x02020202,0x010101,0x1ff
|
||||
temp_add=29767
|
||||
temp_mult=425
|
||||
|
||||
btc_flags=0x6
|
||||
btc_params0=5000
|
||||
btc_params1=1000
|
||||
btc_params6=63
|
|
@ -1,45 +0,0 @@
|
|||
BR2_arm=y
|
||||
BR2_cortex_a7=y
|
||||
BR2_ARM_FPU_NEON_VFPV4=y
|
||||
BR2_GLOBAL_PATCH_DIR="board/sinovoip/m1-plus/patches"
|
||||
BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_10=y
|
||||
BR2_TARGET_GENERIC_HOSTNAME="bananapi"
|
||||
BR2_TARGET_GENERIC_ISSUE="Welcome to Banana Pi!"
|
||||
BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_MDEV=y
|
||||
BR2_TARGET_GENERIC_GETTY_PORT="ttyS0"
|
||||
BR2_ROOTFS_OVERLAY="board/sinovoip/m1-plus/rootfs_overlay"
|
||||
BR2_ROOTFS_POST_BUILD_SCRIPT="board/sinovoip/m1-plus/post-build.sh"
|
||||
BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
|
||||
BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/sinovoip/m1-plus/genimage.cfg"
|
||||
BR2_LINUX_KERNEL=y
|
||||
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
|
||||
BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.10.3"
|
||||
BR2_LINUX_KERNEL_DEFCONFIG="sunxi"
|
||||
BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/sinovoip/m1-plus/linux-wifi.fragment"
|
||||
BR2_LINUX_KERNEL_DTS_SUPPORT=y
|
||||
BR2_LINUX_KERNEL_INTREE_DTS_NAME="sun7i-a20-bananapi-m1-plus"
|
||||
BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
|
||||
BR2_PACKAGE_LINUX_FIRMWARE=y
|
||||
BR2_PACKAGE_LINUX_FIRMWARE_BRCM_BCM43XXX=y
|
||||
BR2_PACKAGE_IW=y
|
||||
BR2_PACKAGE_WPA_SUPPLICANT=y
|
||||
BR2_PACKAGE_WPA_SUPPLICANT_CLI=y
|
||||
BR2_PACKAGE_WPA_SUPPLICANT_PASSPHRASE=y
|
||||
BR2_TARGET_ROOTFS_EXT2=y
|
||||
BR2_TARGET_ROOTFS_EXT2_4=y
|
||||
# BR2_TARGET_ROOTFS_TAR is not set
|
||||
BR2_TARGET_UBOOT=y
|
||||
BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
|
||||
BR2_TARGET_UBOOT_CUSTOM_VERSION=y
|
||||
BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2019.10"
|
||||
BR2_TARGET_UBOOT_BOARD_DEFCONFIG="bananapi_m1_plus"
|
||||
BR2_TARGET_UBOOT_NEEDS_DTC=y
|
||||
BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y
|
||||
BR2_TARGET_UBOOT_SPL=y
|
||||
BR2_TARGET_UBOOT_SPL_NAME="u-boot-sunxi-with-spl.bin"
|
||||
BR2_PACKAGE_HOST_DOSFSTOOLS=y
|
||||
BR2_PACKAGE_HOST_GENIMAGE=y
|
||||
BR2_PACKAGE_HOST_MTOOLS=y
|
||||
BR2_PACKAGE_HOST_UBOOT_TOOLS=y
|
||||
BR2_PACKAGE_HOST_UBOOT_TOOLS_BOOT_SCRIPT=y
|
||||
BR2_PACKAGE_HOST_UBOOT_TOOLS_BOOT_SCRIPT_SOURCE="board/sinovoip/m1-plus/boot.cmd"
|
Loading…
Reference in a new issue