configs/raspberrypi3: use correct CPU
We so far were using a Cortex-A7 as the CPU for the rpi3, as this was the closest we had available, in 32-bit mode, to the real CPU used in the rpi3. But now we can also use the Cortex-A53 in 32-bit mode, so we use that, which makes for an optimised build (A53 has an improved instruction set, as compared to the A7). Also drop the DTB overlay option, it defaults to 'y'. Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Cc: Martin Bark <martin@barkynet.com> Cc: Peter Seiderer <ps.report@gmx.net> Tested-by: Ricardo Martincoski <ricardo.martincoski@gmail.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit is contained in:
parent
cf9a5c729f
commit
a13a388dd4
|
@ -1,6 +1,5 @@
|
|||
BR2_arm=y
|
||||
BR2_cortex_a7=y
|
||||
BR2_ARM_EABIHF=y
|
||||
BR2_cortex_a53=y
|
||||
BR2_ARM_FPU_NEON_VFPV4=y
|
||||
|
||||
BR2_TOOLCHAIN_BUILDROOT_CXX=y
|
||||
|
@ -21,7 +20,6 @@ BR2_LINUX_KERNEL_DTS_SUPPORT=y
|
|||
BR2_LINUX_KERNEL_INTREE_DTS_NAME="bcm2710-rpi-3-b bcm2710-rpi-cm3"
|
||||
|
||||
BR2_PACKAGE_RPI_FIRMWARE=y
|
||||
BR2_PACKAGE_RPI_FIRMWARE_INSTALL_DTB_OVERLAYS=y
|
||||
|
||||
# Required tools to create the SD image
|
||||
BR2_PACKAGE_HOST_DOSFSTOOLS=y
|
||||
|
|
Loading…
Reference in a new issue