configs/amarula_a64_relic: remove defconfig
This defconfig has been failing to build for several months, with nobody stepping up to fix it. It's time to drop it. See https://lore.kernel.org/buildroot/20220806224338.0159e15c@windsurf/ for a notification on August 6, 2022 about the issues with this defconfig. Fixes: https://gitlab.com/buildroot.org/buildroot/-/jobs/3234498966 Cc: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>2022.11.x
Thomas Petazzoni
Yann E. MORIN
parent
ce38e455bb
commit
b933078150
|
|
@ -1320,7 +1320,6 @@ F: board/orangepi/orangepi-prime/
|
|||
F: board/orangepi/orangepi-win/
|
||||
F: board/orangepi/orangepi-zero-plus2/
|
||||
F: board/pine64/
|
||||
F: configs/amarula_a64_relic_defconfig
|
||||
F: configs/amarula_vyasa_rk3288_defconfig
|
||||
F: configs/asus_tinker_rk3288_defconfig
|
||||
F: configs/bananapi_m1_defconfig
|
||||
|
|
|
|||
|
|
@ -1,4 +0,0 @@
|
|||
label linux-4.17.0-rc3
|
||||
kernel /Image
|
||||
devicetree /sun50i-a64-amarula-relic.dtb
|
||||
append console=ttyS0,115200 earlyprintk root=/dev/mmcblk1p4 rootwait
|
||||
|
|
@ -1,11 +0,0 @@
|
|||
image boot.vfat {
|
||||
vfat {
|
||||
files = {
|
||||
"Image",
|
||||
"sun50i-a64-amarula-relic.dtb",
|
||||
"extlinux"
|
||||
}
|
||||
}
|
||||
|
||||
size = 64M
|
||||
}
|
||||
|
|
@ -1,4 +0,0 @@
|
|||
#!/bin/sh
|
||||
BOARD_DIR="$(dirname $0)"
|
||||
|
||||
install -m 0644 -D $BOARD_DIR/extlinux.conf $BINARIES_DIR/extlinux/extlinux.conf
|
||||
|
|
@ -1,90 +0,0 @@
|
|||
Amarula A64 Relic
|
||||
================
|
||||
|
||||
Amarula A64-Relic is an Allwinner A64 based IoT device, which supports:
|
||||
- Allwinner A64 Cortex-A53
|
||||
- Mali-400MP2 GPU
|
||||
- AXP803 PMIC
|
||||
- 1GB DDR3 RAM
|
||||
- 8GB eMMC
|
||||
- AP6330 Wifi/BLE
|
||||
- MIPI-DSI
|
||||
- CSI: OV5640 sensor
|
||||
- USB OTG
|
||||
- 12V DC power supply
|
||||
|
||||
Wiki link:
|
||||
https://openedev.amarulasolutions.com/display/ODWIKI/Amarual+A64-Relic
|
||||
|
||||
Build
|
||||
=====
|
||||
|
||||
$ make amarula_a64_relic_defconfig
|
||||
|
||||
$ make
|
||||
|
||||
build files at output/images/:
|
||||
- sunxi-spl.bin
|
||||
- u-boot.itb
|
||||
- Image
|
||||
- sun50i-a64-amarula-relic.dtb
|
||||
- boot.vfat
|
||||
- rootfs.ext4
|
||||
|
||||
Write eMMC
|
||||
=========
|
||||
|
||||
The board comes with an operating system preloaded on the eMMC.
|
||||
To replace it with the Buildroot-built system, take the following
|
||||
steps
|
||||
|
||||
1. Connect the board UART with host and open minicom(ttyUSBx/115200N8)
|
||||
|
||||
2. Supply 12V DC for power-on the board.
|
||||
|
||||
3. Interrupt U-Boot by pressing enter
|
||||
|
||||
4. Create GPT partitions
|
||||
=> mmc dev 1
|
||||
=> gpt write mmc 1 $partitions
|
||||
|
||||
5. Connect the board USB-OTG with USB slot on the host.
|
||||
|
||||
6. Initiate fastboot
|
||||
=> fastboot 0
|
||||
|
||||
7. Write images from host onto eMMC using fastboot
|
||||
$ cd output/images
|
||||
$ sudo fastboot -i 0x1f3a flash loader1 sunxi-spl.bin
|
||||
$ sudo fastboot -i 0x1f3a flash loader2 u-boot.itb
|
||||
$ sudo fastboot -i 0x1f3a flash esp boot.vfat
|
||||
$ sudo fastboot -i 0x1f3a flash system rootfs.ext4
|
||||
|
||||
Update eMMC during Development
|
||||
==============================
|
||||
|
||||
During development, reflashing the entire filesystem image at every
|
||||
change is time consuming. A useful alternative is to directly access
|
||||
over USB the filesystem stored on the eMMC, using the USB Mass Storage
|
||||
capability of U-Boot. To achieve this:
|
||||
|
||||
1. Build U-Boot by enabling UMS
|
||||
$ make uboot-menuconfig
|
||||
(select CONFIG_CMD_USB_MASS_STORAGE=y)
|
||||
|
||||
2. Follow all 6 steps from 'Write eMMC' and mount eMMC on host
|
||||
=> mmc dev 1
|
||||
=> ums 0 mmc 1
|
||||
|
||||
WiFi
|
||||
====
|
||||
|
||||
# wpa_passphrase ACCESSPOINTNAME >> /etc/wpa_supplicant.conf
|
||||
(type password and enter)
|
||||
# wpa_supplicant -i wlan0 -c /etc/wpa_supplicant.conf -B
|
||||
# udhcpc -i wlan0
|
||||
# ping google.com
|
||||
|
||||
--
|
||||
Jagan Teki <jagan@amarulasolutions.com>
|
||||
29-Jun-2018
|
||||
|
|
@ -1,83 +0,0 @@
|
|||
#AP6330_NVRAM_V1.0_20121130
|
||||
#Sample variables file for BCM94330 SD FC AGB board
|
||||
manfid=0x2d0
|
||||
prodid=0x0547
|
||||
vendid=0x14e4
|
||||
devid=0x4360
|
||||
boardtype=0x05e1
|
||||
boardrev=0x1202
|
||||
boardflags=0x0080200
|
||||
nocrc=1
|
||||
xtalfreq=26000
|
||||
boardnum=22
|
||||
macaddr=00:90:4c:c5:12:38
|
||||
ag0=254
|
||||
aa2g=1
|
||||
ccode=ALL
|
||||
pa0itssit=0x20
|
||||
pa0b0=5587
|
||||
pa0b1=-633
|
||||
pa0b2=-158
|
||||
rssismf2g=0xa
|
||||
rssismc2g=0x3
|
||||
rssisav2g=0x7
|
||||
#rssi params for 5GHz
|
||||
rssismf5g=0x4
|
||||
rssismc5g=0x3
|
||||
rssisav5g=0x7
|
||||
#PA parameters for lower a-band
|
||||
pa1lob0=4748
|
||||
pa1lob1=-566
|
||||
pa1lob2=-180
|
||||
#PA parameters for midband
|
||||
pa1b0=4762
|
||||
pa1b1=-593
|
||||
pa1b2=-172
|
||||
#PA parameters for high band
|
||||
#pa1hib0=4596
|
||||
pa1hib0=4666
|
||||
pa1hib1=-619
|
||||
pa1hib2=-163
|
||||
rxpo5g=0
|
||||
maxp2ga0=74
|
||||
maxp5ga0=66
|
||||
maxp5gla0=66
|
||||
maxp5gha0=66
|
||||
# 2.4G Tx Power offsets
|
||||
cck2gpo=0x2222
|
||||
ofdm2gpo=0x44444444
|
||||
mcs2gpo0=0x6666
|
||||
mcs2gpo1=0x6666
|
||||
# 5G Tx Power offsets
|
||||
ofdm5gpo=0x44444444
|
||||
ofdm5glpo=0x44444444
|
||||
ofdm5ghpo=0x44444444
|
||||
mcs5gpo0=0x6666
|
||||
mcs5gpo1=0x6666
|
||||
mcs5glpo0=0x6666
|
||||
mcs5glpo1=0x6666
|
||||
mcs5ghpo0=0x6666
|
||||
mcs5ghpo1=0x6666
|
||||
sromrev=3
|
||||
il0macaddr=00:90:4c:c5:12:38
|
||||
wl0id=0x431b
|
||||
cckPwrOffset=4
|
||||
swctrlmap_2g=0x44844484,0x42824282,0x40804484,0x18282,0x1ff
|
||||
triso5g=0
|
||||
swctrlmap_5g=0x00100010,0x20202020,0x20202020,0x14202,0x0f0
|
||||
rfreg033=0x19
|
||||
rfreg033_cck=0x1f
|
||||
dacrate2g=160
|
||||
dacrate5g=160
|
||||
txalpfbyp2g=1
|
||||
bphyscale=17
|
||||
cckPwrIdxCorr=-15
|
||||
pacalidx2g=50
|
||||
#pacalidx5g=20
|
||||
noise_cal_ref_2g=53
|
||||
noise_cal_po_2g=0
|
||||
noise_cal_ref_5g=52
|
||||
noise_cal_po_5g=5,0,0
|
||||
# 4330 OOB parameter: High level trigger
|
||||
muxenab=0x10
|
||||
|
||||
|
|
@ -1,63 +0,0 @@
|
|||
BR2_aarch64=y
|
||||
BR2_cortex_a53=y
|
||||
BR2_ARM_FPU_VFPV4=y
|
||||
|
||||
# Linux headers same as kernel, a 4.17 series
|
||||
BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_17=y
|
||||
|
||||
# Firmware
|
||||
BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
|
||||
BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_GIT=y
|
||||
BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_URL="https://github.com/apritzel/arm-trusted-firmware.git"
|
||||
BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="sun50iw1p1"
|
||||
BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_VERSION="aa75c8da415158a94b82a430b2b40000778e851f"
|
||||
BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31=y
|
||||
|
||||
# Bootloader
|
||||
BR2_TARGET_UBOOT=y
|
||||
BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
|
||||
BR2_TARGET_UBOOT_CUSTOM_VERSION=y
|
||||
BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2018.07"
|
||||
BR2_TARGET_UBOOT_BOARD_DEFCONFIG="amarula_a64_relic"
|
||||
BR2_TARGET_UBOOT_NEEDS_DTC=y
|
||||
BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y
|
||||
BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y
|
||||
BR2_TARGET_UBOOT_FORMAT_CUSTOM=y
|
||||
BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot.itb"
|
||||
BR2_TARGET_UBOOT_SPL=y
|
||||
BR2_TARGET_UBOOT_SPL_NAME="spl/sunxi-spl.bin"
|
||||
|
||||
# Kernel
|
||||
BR2_LINUX_KERNEL=y
|
||||
BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
|
||||
BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,amarula,linux-amarula,v1.0a)/linux-amarula_v1.0a.tar.gz"
|
||||
BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y
|
||||
BR2_LINUX_KERNEL_DTS_SUPPORT=y
|
||||
BR2_LINUX_KERNEL_INTREE_DTS_NAME="allwinner/sun50i-a64-amarula-relic"
|
||||
BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
|
||||
|
||||
# Filesystem
|
||||
BR2_TARGET_GENERIC_ISSUE="Welcome to Amarula A64-Relic"
|
||||
BR2_TARGET_ROOTFS_EXT2=y
|
||||
BR2_TARGET_ROOTFS_EXT2_4=y
|
||||
BR2_PACKAGE_HOST_ANDROID_TOOLS=y
|
||||
BR2_PACKAGE_HOST_ANDROID_TOOLS_FASTBOOT=y
|
||||
BR2_PACKAGE_HOST_DOSFSTOOLS=y
|
||||
BR2_PACKAGE_HOST_GENIMAGE=y
|
||||
BR2_PACKAGE_HOST_MTOOLS=y
|
||||
BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_MDEV=y
|
||||
BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
|
||||
BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/amarula/a64-relic/genimage.cfg"
|
||||
BR2_ROOTFS_POST_BUILD_SCRIPT="board/amarula/a64-relic/post-build.sh"
|
||||
BR2_ROOTFS_OVERLAY="board/amarula/a64-relic/rootfs_overlay"
|
||||
|
||||
# wireless firmware
|
||||
BR2_PACKAGE_LINUX_FIRMWARE=y
|
||||
BR2_PACKAGE_LINUX_FIRMWARE_BRCM_BCM43XX=y
|
||||
|
||||
# wireless tools
|
||||
BR2_PACKAGE_IW=y
|
||||
BR2_PACKAGE_WPA_SUPPLICANT=y
|
||||
BR2_PACKAGE_WPA_SUPPLICANT_NL80211=y
|
||||
BR2_PACKAGE_WPA_SUPPLICANT_AP_SUPPORT=y
|
||||
BR2_PACKAGE_WPA_SUPPLICANT_PASSPHRASE=y
|
||||
Loading…
Reference in New Issue