configs/qmx6: remove defconfig
The original submitter and follow-up contributors to the qmx6 defconfig no longer have the hardware available or the time/interest to update this defconfig, which currently fails to build with gcc 5.x. Due to this, this commit removes this defconfig. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit is contained in:
parent
4d65a7f0ee
commit
be8779da6b
|
@ -1,36 +0,0 @@
|
|||
This is the minimal buildroot support for the Congatec QMX6 Qseven CoM
|
||||
|
||||
conga-QMX6 is based on the freescale iMX6 SoC. For more information please
|
||||
have a look at http://www.congatec.com/products/qseven/conga-qmx6.html
|
||||
|
||||
The configuration is based on the currently latest kernel release from
|
||||
Congatec's git repository which is based on 3.0.35. The bootloader u-boot
|
||||
is preconfigured on the CPU module and does not need to be replaced.
|
||||
|
||||
To build the default configuration you only have to:
|
||||
|
||||
make qmx6_defconfig && make
|
||||
|
||||
You will need a microSD card of sufficient size and the first or only
|
||||
partition configured as Linux type.
|
||||
|
||||
To transfer the system to the card do:
|
||||
|
||||
$ sudo dd if=output/images/rootfs.ext2 of=/dev/sdX1
|
||||
|
||||
You can optionally extend the filesystem size to the whole partition:
|
||||
|
||||
$ sudo resize2fs /dev/sdX1
|
||||
|
||||
You can also update the card image without completely rewriting it:
|
||||
|
||||
$ sudo mount /dev/sdX1 /mnt
|
||||
$ sudo tar xf output/images/rootfs.tar -C /mnt
|
||||
$ sudo umount /mnt
|
||||
|
||||
Connect a terminal program to the rs232 connector marked "CONSOLE"
|
||||
with baudrate set to 115200, insert the microSD card into the socket
|
||||
on the CPU module and power the board to watch the system boot.
|
||||
|
||||
Booting from the SD card slot on the base board is currently not
|
||||
supported.
|
|
@ -1,33 +0,0 @@
|
|||
BR2_arm=y
|
||||
BR2_cortex_a9=y
|
||||
# Linux headers same as kernel, a 3.14 series
|
||||
BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_3_14=y
|
||||
BR2_TARGET_GENERIC_GETTY_PORT="ttymxc1"
|
||||
|
||||
# Notice you need a recent version of u-boot (with DT support) to be able
|
||||
# to boot this kernel
|
||||
BR2_LINUX_KERNEL=y
|
||||
BR2_LINUX_KERNEL_CUSTOM_GIT=y
|
||||
BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://git.congatec.com/arm/imx6_kernel_3.14.git"
|
||||
# Last version of branch cgt_qmx6_3.14.28_1.0.0
|
||||
BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="105820d6bd251deb49c3dd3f71fa0d76adce97c7"
|
||||
BR2_LINUX_KERNEL_DEFCONFIG="qmx6"
|
||||
BR2_LINUX_KERNEL_UIMAGE=y
|
||||
BR2_LINUX_KERNEL_UIMAGE_LOADADDR="0x10008000"
|
||||
BR2_LINUX_KERNEL_DTS_SUPPORT=y
|
||||
BR2_LINUX_KERNEL_INTREE_DTS_NAME="imx6q-qmx6"
|
||||
BR2_LINUX_KERNEL_INSTALL_TARGET=y
|
||||
|
||||
# Change boardname depending of your product number
|
||||
BR2_TARGET_UBOOT=y
|
||||
BR2_TARGET_UBOOT_BOARDNAME="cgt_qmx6_pn016103"
|
||||
BR2_TARGET_UBOOT_CUSTOM_GIT=y
|
||||
BR2_TARGET_UBOOT_CUSTOM_REPO_URL="https://git.congatec.com/arm/qmx6_uboot.git"
|
||||
BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="4d3b64e93064ed3d97ef7d91ff0f61a693a460fc"
|
||||
BR2_TARGET_UBOOT_FORMAT_CUSTOM=y
|
||||
BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot.pn016103.imx"
|
||||
|
||||
BR2_TARGET_ROOTFS_EXT2=y
|
||||
BR2_TARGET_ROOTFS_EXT2_3=y
|
||||
|
||||
BR2_PACKAGE_HOST_UBOOT_TOOLS=y
|
Loading…
Reference in a new issue