From c45b2f2b9da5109e40a18ffdef379f5112aa7224 Mon Sep 17 00:00:00 2001 From: Francois Perrad Date: Tue, 22 Nov 2022 07:43:25 +0100 Subject: [PATCH] board/freescale/ls1028ardb: add more documentation Signed-off-by: Francois Perrad Signed-off-by: Thomas Petazzoni --- board/freescale/ls1028ardb/readme.txt | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) diff --git a/board/freescale/ls1028ardb/readme.txt b/board/freescale/ls1028ardb/readme.txt index 2dd2e2d84b..cfd1c8c490 100644 --- a/board/freescale/ls1028ardb/readme.txt +++ b/board/freescale/ls1028ardb/readme.txt @@ -8,6 +8,16 @@ for more details about the board and the QorIQ Layerscape SoC, see the following - https://www.nxp.com/design/qoriq-developer-resources/layerscape-ls1028a-reference-design-board:LS1028ARDB - https://www.nxp.com/LS1028A +for the software NXP LSDK (Layerscape Software Development Kit), see + - https://www.nxp.com/docs/en/user-guide/LSDKUG_Rev21.08.pdf + +the components from NXP are: + - rcw, LSDK 21.08 + - atf (fork), LSDK 21.08 + - uboot (fork), LSDK 21.08 + - cadence-dp-firmware (blob), LSDK 20.12 + - linux (fork), LSDK 21.08 + Build ===== @@ -67,3 +77,11 @@ The Cadence DP (Display Port) firmware must loaded from uboot with the following Loading hdp firmware from 0x0000000080000000 offset 0x0000000000002000 Loading hdp firmware Complete => boot + +The interfaces of Ethernet switch (Felix DSA) are bring up with the following commands: + + ip link set eno2 up + ip link set swp0 up + ip link set swp1 up + ip link set swp2 up + ip link set swp3 up