configs/friendlyarm_nanopi_neo_plus2: remove defconfig
This defconfig has been failing to build for several months, with nobody stepping up to fix it. It's time to drop it. See https://lore.kernel.org/buildroot/20220806224338.0159e15c@windsurf/ for a notification on August 6, 2022 about the issues with this defconfig. Fixes: https://gitlab.com/buildroot.org/buildroot/-/jobs/3234499055 Cc: Louis Aussedat <aussedat.louis@gmail.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This commit is contained in:
Thomas Petazzoni
Yann E. MORIN
parent
5f7a517f5c
commit
d968cab0bd
|
|
@ -1780,8 +1780,6 @@ F: package/ti-sgx-km/
|
|||
F: package/ti-sgx-um/
|
||||
|
||||
N: Louis Aussedat <aussedat.louis@gmail.com>
|
||||
F: board/friendlyarm/nanopi-neo-plus2/
|
||||
F: configs/friendlyarm_nanopi_neo_plus2_defconfig
|
||||
F: package/mfoc
|
||||
F: package/libpam-nfc
|
||||
F: package/python-dnspython/
|
||||
|
|
|
|||
|
|
@ -1,4 +0,0 @@
|
|||
label linux
|
||||
kernel /Image
|
||||
devicetree /sun50i-h5-nanopi-neo-plus2.dtb
|
||||
append console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait
|
||||
|
|
@ -1,40 +0,0 @@
|
|||
image boot.vfat {
|
||||
vfat {
|
||||
files = {
|
||||
"Image",
|
||||
"sun50i-h5-nanopi-neo-plus2.dtb",
|
||||
"extlinux"
|
||||
}
|
||||
}
|
||||
|
||||
size = 64M
|
||||
}
|
||||
|
||||
image sdcard.img {
|
||||
hdimage {
|
||||
}
|
||||
|
||||
partition spl {
|
||||
in-partition-table = "no"
|
||||
image = "sunxi-spl.bin"
|
||||
offset = 8K
|
||||
}
|
||||
|
||||
partition u-boot {
|
||||
in-partition-table = "no"
|
||||
image = "u-boot.itb"
|
||||
offset = 40K
|
||||
size = 1M # 1MB - 40KB
|
||||
}
|
||||
|
||||
partition boot {
|
||||
partition-type = 0xC
|
||||
bootable = "true"
|
||||
image = "boot.vfat"
|
||||
}
|
||||
|
||||
partition rootfs {
|
||||
partition-type = 0x83
|
||||
image = "rootfs.ext4"
|
||||
}
|
||||
}
|
||||
|
|
@ -1,10 +0,0 @@
|
|||
# wireless core
|
||||
CONFIG_WIRELESS=y
|
||||
CONFIG_CFG80211=y
|
||||
CONFIG_MAC80211=y
|
||||
CONFIG_CFG80211_WEXT=y
|
||||
|
||||
# wireless drivers
|
||||
CONFIG_WLAN=y
|
||||
CONFIG_WLAN_VENDOR_BROADCOM=y
|
||||
CONFIG_BRCMFMAC=m
|
||||
|
|
@ -1,4 +0,0 @@
|
|||
#!/bin/sh
|
||||
BOARD_DIR="$(dirname $0)"
|
||||
|
||||
install -m 0644 -D $BOARD_DIR/extlinux.conf $BINARIES_DIR/extlinux/extlinux.conf
|
||||
|
|
@ -1,37 +0,0 @@
|
|||
Intro
|
||||
=====
|
||||
|
||||
This default configuration will allow you to start experimenting with the
|
||||
buildroot environment for the Nanopi NEO Plus2. With the current configuration
|
||||
it will bring-up the board, and allow access through the serial console.
|
||||
|
||||
Nanopi NEO2 link:
|
||||
http://nanopi.io/nanopi-neo-plus2.html
|
||||
|
||||
Wiki link:
|
||||
http://wiki.friendlyarm.com/wiki/index.php/NanoPi_NEO_Plus2
|
||||
|
||||
This configuration uses U-Boot mainline and kernel mainline.
|
||||
|
||||
How to build
|
||||
============
|
||||
|
||||
$ make friendlyarm_nanopi_neo_plus2_defconfig
|
||||
$ make
|
||||
|
||||
Note: you will need access to the internet to download the required
|
||||
sources.
|
||||
|
||||
How to write the SD card
|
||||
========================
|
||||
|
||||
Once the build process is finished you will have an image called "sdcard.img"
|
||||
in the output/images/ directory.
|
||||
|
||||
Copy the bootable "sdcard.img" onto an SD card with "dd":
|
||||
|
||||
$ sudo dd if=output/images/sdcard.img of=/dev/sdX
|
||||
$ sudo sync
|
||||
|
||||
Insert the micro SDcard in your Nanopi NEO Plus2 and power it up. The console
|
||||
is on the serial line, 115200 8N1.
|
||||
|
|
@ -1,53 +0,0 @@
|
|||
#AP6212_NVRAM_V1.0.1_20160606
|
||||
# 2.4 GHz, 20 MHz BW mode
|
||||
# The following parameter values are just placeholders, need to be updated.
|
||||
manfid=0x2d0
|
||||
prodid=0x0726
|
||||
vendid=0x14e4
|
||||
devid=0x43e2
|
||||
boardtype=0x0726
|
||||
boardrev=0x1101
|
||||
boardnum=22
|
||||
macaddr=00:90:4c:c5:12:38
|
||||
sromrev=11
|
||||
boardflags=0x00404201
|
||||
xtalfreq=26000
|
||||
nocrc=1
|
||||
ag0=255
|
||||
aa2g=1
|
||||
ccode=ALL
|
||||
|
||||
pa0itssit=0x20
|
||||
extpagain2g=0
|
||||
|
||||
#PA parameters for 2.4GHz, measured at CHIP OUTPUT
|
||||
pa2ga0=-168,7161,-820
|
||||
AvVmid_c0=0x0,0xc8
|
||||
cckpwroffset0=5
|
||||
|
||||
# PPR params
|
||||
maxp2ga0=90
|
||||
txpwrbckof=6
|
||||
cckbw202gpo=0x5555
|
||||
legofdmbw202gpo=0x77777777
|
||||
mcsbw202gpo=0xaaaaaaaa
|
||||
|
||||
# OFDM IIR :
|
||||
ofdmdigfilttype=7
|
||||
# PAPD mode:
|
||||
papdmode=2
|
||||
|
||||
il0macaddr=00:90:4c:c5:12:38
|
||||
wl0id=0x431b
|
||||
|
||||
#OOB parameters
|
||||
hostwake=0x40
|
||||
hostrdy=0x41
|
||||
usbrdy=0x03
|
||||
usbrdydelay=100
|
||||
deadman_to=0xffffffff
|
||||
# muxenab: 0x1 for UART enable, 0x10 for Host awake
|
||||
muxenab=0x10
|
||||
# CLDO PWM voltage settings - 0x4 - 1.1 volt
|
||||
#cldo_pwm=0x4
|
||||
glitch_based_crsmin=1
|
||||
|
|
@ -1,62 +0,0 @@
|
|||
BR2_aarch64=y
|
||||
BR2_cortex_a53=y
|
||||
BR2_ARM_FPU_VFPV4=y
|
||||
|
||||
BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_3=y
|
||||
BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_MDEV=y
|
||||
BR2_ROOTFS_OVERLAY="board/friendlyarm/nanopi-neo-plus2/rootfs_overlay"
|
||||
|
||||
# Firmware
|
||||
BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
|
||||
BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_GIT=y
|
||||
BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_URL="https://github.com/apritzel/arm-trusted-firmware.git"
|
||||
BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="sun50iw1p1"
|
||||
BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_VERSION="aa75c8da415158a94b82a430b2b40000778e851f"
|
||||
R2_TARGET_ARM_TRUSTED_FIRMWARE_BL31=y
|
||||
|
||||
# Bootloader
|
||||
BR2_TARGET_UBOOT=y
|
||||
BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
|
||||
BR2_TARGET_UBOOT_CUSTOM_VERSION=y
|
||||
BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2019.10"
|
||||
BR2_TARGET_UBOOT_BOARD_DEFCONFIG="nanopi_neo_plus2"
|
||||
BR2_TARGET_UBOOT_NEEDS_DTC=y
|
||||
BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y
|
||||
BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y
|
||||
BR2_TARGET_UBOOT_FORMAT_CUSTOM=y
|
||||
BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot.itb"
|
||||
BR2_TARGET_UBOOT_SPL=y
|
||||
BR2_TARGET_UBOOT_SPL_NAME="spl/sunxi-spl.bin"
|
||||
|
||||
# Kernel
|
||||
BR2_LINUX_KERNEL=y
|
||||
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
|
||||
BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.3.4"
|
||||
BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y
|
||||
BR2_LINUX_KERNEL_DTS_SUPPORT=y
|
||||
BR2_LINUX_KERNEL_INTREE_DTS_NAME="allwinner/sun50i-h5-nanopi-neo-plus2"
|
||||
BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
|
||||
BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/friendlyarm/nanopi-neo-plus2/linux-extras.config"
|
||||
|
||||
# Filesystem
|
||||
BR2_TARGET_GENERIC_ISSUE="Welcome to FriendlyARM Nanopi NEO Plus2"
|
||||
BR2_TARGET_ROOTFS_EXT2=y
|
||||
BR2_TARGET_ROOTFS_EXT2_4=y
|
||||
BR2_PACKAGE_HOST_DOSFSTOOLS=y
|
||||
BR2_PACKAGE_HOST_GENIMAGE=y
|
||||
BR2_PACKAGE_HOST_MTOOLS=y
|
||||
BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
|
||||
BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/friendlyarm/nanopi-neo-plus2/genimage.cfg"
|
||||
BR2_ROOTFS_POST_BUILD_SCRIPT="board/friendlyarm/nanopi-neo-plus2/post-build.sh"
|
||||
|
||||
# wireless firmware
|
||||
BR2_PACKAGE_LINUX_FIRMWARE=y
|
||||
BR2_PACKAGE_LINUX_FIRMWARE_BRCM_BCM43XXX=y
|
||||
|
||||
# wireless tools
|
||||
BR2_PACKAGE_IW=y
|
||||
BR2_PACKAGE_WIRELESS_TOOLS=y
|
||||
BR2_PACKAGE_WIRELESS_TOOLS_LIB=y
|
||||
BR2_PACKAGE_WPA_SUPPLICANT=y
|
||||
BR2_PACKAGE_WPA_SUPPLICANT_NL80211=y
|
||||
BR2_PACKAGE_WPA_SUPPLICANT_CLI=y
|
||||
Loading…
Reference in a new issue