deepcrayon
/
buildroot
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

configs/riotboard: remove defconfig 

This defconfig fails to build with gcc 6.x, even though we switched to
using gcc 6.x as the default gcc version in May 2017.

This defconfig also hasn't seen any non-mechanical update since
November 2015.

So it's time to get rid of it, in order to remove the following build
failure:

  https://gitlab.com/buildroot.org/buildroot/-/jobs/55306938

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2018.05.x
Thomas Petazzoni 2018-03-07 21:30:48 +01:00 committed by Peter Korsgaard
parent cf69551e94
commit f124c2f076
4 changed files with 0 additions and 89 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

1
.gitlab-ci.yml
View File

@ -214,7 +214,6 @@ raspberrypi3_64_defconfig: *defconfig
raspberrypi3_defconfig: *defconfig
raspberrypi3_qt5we_defconfig: *defconfig
raspberrypi_defconfig: *defconfig
riotboard_defconfig: *defconfig
roseapplepi_defconfig: *defconfig
s6lx9_microboard_defconfig: *defconfig
sheevaplug_defconfig: *defconfig

46
board/embest/riotboard/readme.txt
View File

@ -1,46 +0,0 @@
Buildroot for Embest RIoTboard
==============================
1. Compiling buildroot
----------------------
make riotboard_defconfig
make
2. Installing buildroot
-----------------------
Prepare an SD-card and plug it into your card reader. Write the bootloader to
your SD-card:
sudo dd if=output/images/u-boot.imx of=/dev/sdX bs=1k seek=1
Create 1 partition on the SD-card using your favourite tool. The
partition should be big enough to hold your rootfs, for example
128MiB. Here's an example partition layout:
Device Boot Start End Blocks Id System
/dev/sdX1 2048 264191 131072 83 Linux
Format the SD-card partition with your favourite filesystem:
sudo mkfs.ext2 /dev/sdX1
Deploy your rootfs to the SD-card:
sudo mkdir /mnt/sdcard/
sudo mount /dev/sdX1 /mnt/sdcard/
sudo tar xf output/images/rootfs.tar -C /mnt/sdcard/
sudo umount /dev/sdX1
3. Running buildroot
--------------------
Position the board so you can read the label "RIoTboard" on the right side of
SW1 DIP switches. Configure the SW1 swiches like this:
10100101 (1 means ON position, 0 means OFF position)
Now plug your prepared SD-card in slot J6. Connect a serial console (115200, 8,
N, 1) to header J18. Connect a 5V/1A power supply to the board and enjoy your
new toy.

6
board/embest/riotboard/rootfs_overlay/boot/extlinux/extlinux.conf
View File

@ -1,6 +0,0 @@
default buildroot
label buildroot
kernel /boot/uImage
devicetree /boot/imx6dl-riotboard.dtb
append console=ttymxc1,115200 root=/dev/mmcblk0p1 rw

36
configs/riotboard_defconfig
View File

@ -1,36 +0,0 @@
# architecture
BR2_arm=y
BR2_cortex_a9=y
BR2_ARM_ENABLE_NEON=y
BR2_ARM_ENABLE_VFP=y
BR2_ARM_FPU_VFPV3=y
# system
BR2_TARGET_GENERIC_GETTY=y
BR2_TARGET_GENERIC_GETTY_PORT="ttymxc1"
# rootfs
BR2_TARGET_ROOTFS_EXT2=y
BR2_TARGET_ROOTFS_EXT2_2r1=y
BR2_ROOTFS_OVERLAY="board/embest/riotboard/rootfs_overlay"
# bootloader
BR2_TARGET_UBOOT=y
BR2_TARGET_UBOOT_CUSTOM_VERSION=y
BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2015.10"
BR2_TARGET_UBOOT_BOARDNAME="riotboard"
BR2_TARGET_UBOOT_FORMAT_IMX=y
# Linux headers same as kernel, a 4.2 series
BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_2=y
# kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.2.6"
BR2_LINUX_KERNEL_DEFCONFIG="imx_v6_v7"
BR2_LINUX_KERNEL_UIMAGE=y
BR2_LINUX_KERNEL_UIMAGE_LOADADDR="0x10008000"
BR2_LINUX_KERNEL_DTS_SUPPORT=y
BR2_LINUX_KERNEL_INTREE_DTS_NAME="imx6dl-riotboard"
BR2_LINUX_KERNEL_INSTALL_TARGET=y