configs/galileo: update to 3.14 kernel

This commit updates the kernel for Galileo board BSP from 3.8 to 3.14.

Signed-off-by: Padraig Connolly <padraig.connolly@intel.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

board/intel/galileo/linux-3.14.config

@@ -1,9 +1,9 @@
-CONFIG_EXPERIMENTAL=y
 # CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_KERNEL_LZMA=y
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_FHANDLE=y
+CONFIG_KERNEL_LZMA=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_BSD_PROCESS_ACCT=y
@@ -22,7 +22,6 @@ CONFIG_BLK_DEV_INITRD=y
 CONFIG_RD_BZIP2=y
 CONFIG_RD_LZMA=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS_ALL=y
 # CONFIG_PCSPKR_PLATFORM is not set
 CONFIG_EMBEDDED=y
 # CONFIG_COMPAT_BRK is not set
@@ -32,16 +31,15 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_LBDAF is not set
 CONFIG_PARTITION_ADVANCED=y
 CONFIG_BSD_DISKLABEL=y
-# CONFIG_EFI_PARTITION is not set
 # CONFIG_ZONE_DMA is not set
-CONFIG_INTEL_QUARK_X1000_SOC=y
+CONFIG_X86_INTEL_QUARK=y
 CONFIG_M586TSC=y
 CONFIG_X86_GENERIC=y
 CONFIG_HPET_TIMER=y
 CONFIG_PREEMPT_VOLUNTARY=y
-CONFIG_X86_UP_APIC=y
 CONFIG_X86_UP_IOAPIC=y
 # CONFIG_X86_MCE_AMD is not set
+# CONFIG_X86_16BIT is not set
 CONFIG_X86_REBOOTFIXUPS=y
 CONFIG_MICROCODE=y
 CONFIG_X86_MSR=y
@@ -56,7 +54,7 @@ CONFIG_EFI_CAPSULE=m
 CONFIG_HZ_100=y
 CONFIG_KEXEC=y
 CONFIG_PHYSICAL_START=0x400000
-# CONFIG_RELOCATABLE is not set
+CONFIG_PHYSICAL_ALIGN=0x1000000
 # CONFIG_COMPAT_VDSO is not set
 CONFIG_PM_RUNTIME=y
 CONFIG_PM_DEBUG=y
@@ -64,7 +62,6 @@ CONFIG_PM_TRACE_RTC=y
 CONFIG_ACPI_PROCFS=y
 CONFIG_ACPI_PROCFS_POWER=y
 CONFIG_ACPI_EC_DEBUGFS=y
-# CONFIG_ACPI_PROC_EVENT is not set
 # CONFIG_ACPI_BATTERY is not set
 # CONFIG_ACPI_FAN is not set
 CONFIG_ACPI_DEBUG=y
@@ -79,11 +76,12 @@ CONFIG_UNIX=y
 CONFIG_INET=y
 CONFIG_SYN_COOKIES=y
 # CONFIG_IPV6_SIT is not set
+CONFIG_IPV6_MULTIPLE_TABLES=y
+CONFIG_IPV6_SUBTREES=y
 CONFIG_VLAN_8021Q=m
 CONFIG_VLAN_8021Q_GVRP=y
 CONFIG_CAN=m
-CONFIG_CAN_RAW=m
-CONFIG_CAN_BCM=m
+# CONFIG_CAN_GW is not set
 CONFIG_CAN_J1939=m
 CONFIG_CAN_VCAN=m
 CONFIG_CAN_SLCAN=m
@@ -96,20 +94,18 @@ CONFIG_BT_BNEP_MC_FILTER=y
 CONFIG_BT_BNEP_PROTO_FILTER=y
 CONFIG_BT_HIDP=m
 CONFIG_BT_HCIBTUSB=m
-CONFIG_BT_HCIVHCI=m
 CONFIG_CFG80211=m
 CONFIG_CFG80211_WEXT=y
 CONFIG_MAC80211=m
+CONFIG_MAC80211_LEDS=y
 CONFIG_RFKILL=m
 CONFIG_RFKILL_INPUT=y
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
+# CONFIG_FW_LOADER_USER_HELPER is not set
 CONFIG_DEBUG_DEVRES=y
 CONFIG_MTD=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_M25P80=y
+CONFIG_MTD_BLOCK=m
 # CONFIG_PNP_DEBUG_MESSAGES is not set
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_LOOP_MIN_COUNT=2
@@ -117,6 +113,7 @@ CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=1
 CONFIG_BLK_DEV_RAM_SIZE=81920
 CONFIG_EEPROM_AT24=m
+CONFIG_EEPROM_93CX6=m
 CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_SG=y
@@ -124,10 +121,12 @@ CONFIG_SCSI_CONSTANTS=y
 CONFIG_SCSI_SPI_ATTRS=y
 # CONFIG_SCSI_LOWLEVEL is not set
 CONFIG_NETDEVICES=y
+CONFIG_TUN=y
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_NET_VENDOR_ADAPTEC is not set
 # CONFIG_NET_VENDOR_ALTEON is not set
 # CONFIG_NET_VENDOR_AMD is not set
+# CONFIG_NET_VENDOR_ARC is not set
 # CONFIG_NET_VENDOR_ATHEROS is not set
 # CONFIG_NET_VENDOR_BROADCOM is not set
 # CONFIG_NET_VENDOR_BROCADE is not set
@@ -138,7 +137,6 @@ CONFIG_NETDEVICES=y
 # CONFIG_NET_VENDOR_EMULEX is not set
 # CONFIG_NET_VENDOR_EXAR is not set
 # CONFIG_NET_VENDOR_HP is not set
-CONFIG_E1000=m
 # CONFIG_NET_VENDOR_I825XX is not set
 # CONFIG_NET_VENDOR_MARVELL is not set
 # CONFIG_NET_VENDOR_MELLANOX is not set
@@ -156,19 +154,19 @@ CONFIG_E1000=m
 # CONFIG_NET_VENDOR_SILAN is not set
 # CONFIG_NET_VENDOR_SIS is not set
 # CONFIG_NET_VENDOR_SMSC is not set
-CONFIG_STMMAC_ETH=y
+CONFIG_STMMAC_ETH=m
 # CONFIG_STMMAC_PLATFORM is not set
-CONFIG_STMMAC_PCI=y
-CONFIG_STMMAC_DA=y
+CONFIG_STMMAC_PCI=m
 # CONFIG_NET_VENDOR_SUN is not set
 # CONFIG_NET_VENDOR_TEHUTI is not set
 # CONFIG_NET_VENDOR_TI is not set
 # CONFIG_NET_VENDOR_VIA is not set
 # CONFIG_NET_VENDOR_WIZNET is not set
+CONFIG_PHYLIB=y
 CONFIG_PPP=m
 CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_ASYNC=m
-CONFIG_IWLWIFI=m
+# CONFIG_RTL_CARDS is not set
 # CONFIG_INPUT_MOUSEDEV is not set
 CONFIG_INPUT_EVDEV=m
 # CONFIG_INPUT_KEYBOARD is not set
@@ -189,41 +187,41 @@ CONFIG_SERIAL_8250_SHARE_IRQ=y
 CONFIG_SERIAL_8250_DETECT_IRQ=y
 CONFIG_SERIAL_8250_RSA=y
 CONFIG_SERIAL_8250_DW=y
+CONFIG_SERIAL_SC16IS7XX=m
+CONFIG_SERIAL_SC16IS7XX_SPI=m
 # CONFIG_HW_RANDOM is not set
 CONFIG_HPET=y
 # CONFIG_HPET_MMAP is not set
-CONFIG_I2C_CHARDEV=y
+CONFIG_I2C=y
 CONFIG_SPI_DEBUG=y
 CONFIG_SPI_GPIO=y
 CONFIG_SPI_PXA2XX=y
-CONFIG_SPI_PXA2XX_PCI=y
-CONFIG_SPI_SPIDEV=y
-CONFIG_PTP_1588_CLOCK_PCH=m
-CONFIG_GPIO_SCH=m
-CONFIG_GPIO_PCA953X=m
+CONFIG_PTP_1588_CLOCK=y
+CONFIG_GPIO_SCH=y
+CONFIG_GPIO_PCA953X=y
 CONFIG_GPIO_PCA953X_IRQ=y
-# CONFIG_HWMON is not set
+CONFIG_GPIO_PCF857X=y
+CONFIG_HWMON=m
+CONFIG_SENSORS_LM75=m
+# CONFIG_X86_PKG_TEMP_THERMAL is not set
 CONFIG_MFD_INTEL_QUARK_HSUART_DMA=y
 CONFIG_CY8C9540A=m
 CONFIG_MFD_PCA9685=m
 CONFIG_INTEL_QRK_GIP=m
 CONFIG_INTEL_QRK_GIP_TEST=m
-CONFIG_LPC_SCH=y
 CONFIG_MEDIA_SUPPORT=m
 CONFIG_MEDIA_CAMERA_SUPPORT=y
 CONFIG_MEDIA_USB_SUPPORT=y
 CONFIG_USB_VIDEO_CLASS=m
 # CONFIG_USB_GSPCA is not set
 # CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set
-# CONFIG_DVB_AU8522_V4L is not set
-# CONFIG_DVB_TUNER_DIB0070 is not set
-# CONFIG_DVB_TUNER_DIB0090 is not set
 # CONFIG_VGA_ARB is not set
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_SOUND=m
 CONFIG_SND=m
 CONFIG_SND_USB_AUDIO=m
 CONFIG_USB=m
+# CONFIG_USB_DEFAULT_PERSIST is not set
 CONFIG_USB_EHCI_HCD=m
 CONFIG_USB_OHCI_HCD=m
 CONFIG_USB_UHCI_HCD=m
@@ -237,40 +235,44 @@ CONFIG_USB_EG20T=m
 CONFIG_USB_ZERO=m
 CONFIG_USB_ETH=m
 CONFIG_USB_MASS_STORAGE=m
-CONFIG_USB_G_SERIAL=m
+CONFIG_USB_G_SERIAL=y
 CONFIG_USB_G_ACM_MS=m
 CONFIG_MMC=y
 CONFIG_MMC_UNSAFE_RESUME=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_PCI=y
-CONFIG_MMC_SDHCI_ACPI=y
 CONFIG_MMC_SDHCI_PLTFM=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=m
 CONFIG_RTC_CLASS=y
+# CONFIG_RTC_SYSTOHC is not set
 CONFIG_DMADEVICES=y
 CONFIG_DW_DMAC=y
 CONFIG_UIO=y
 CONFIG_STAGING=y
-CONFIG_MAX78M6610_LMU=m
-CONFIG_IIO_SYSFS_TRIGGER=m
-CONFIG_IIO_HRTIMER_TRIGGER=m
-# CONFIG_NET_VENDOR_SILICOM is not set
-CONFIG_INTEL_QRK_ESRAM=y
 CONFIG_INTEL_QRK_THERMAL=y
 CONFIG_INTEL_QRK_AUDIO_CTRL=m
 CONFIG_INTEL_QRK_J1708=m
+CONFIG_INTEL_QRK_ESRAM=y
 # CONFIG_IOMMU_SUPPORT is not set
 CONFIG_IIO=y
 CONFIG_IIO_BUFFER_CB=y
 CONFIG_IIO_LIS331DLH_INTEL_QRK=y
+CONFIG_IIO_ST_ACCEL_3AXIS=y
 CONFIG_AD7298=m
 CONFIG_ADC1x8S102=m
+CONFIG_IIO_SYSFS_TRIGGER=m
+CONFIG_IIO_HRTIMER_TRIGGER=m
 CONFIG_PWM=y
-CONFIG_EFI_VARS=m
 CONFIG_DMI_SYSFS=y
+CONFIG_EFI_VARS=m
+# CONFIG_EFI_RUNTIME_MAP is not set
+CONFIG_EXT2_FS=y
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
 CONFIG_EXT4_FS=y
-# CONFIG_EXT4_USE_FOR_EXT23 is not set
-CONFIG_EXT4_FS_POSIX_ACL=y
-CONFIG_EXT4_FS_SECURITY=y
 CONFIG_VFAT_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_TMPFS=y
@@ -285,23 +287,22 @@ CONFIG_NLS_ISO8859_1=y
 CONFIG_PRINTK_TIME=y
 # CONFIG_ENABLE_WARN_DEPRECATED is not set
 CONFIG_FRAME_WARN=2048
-CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_HEADERS_CHECK=y
-# CONFIG_SCHED_DEBUG is not set
-CONFIG_TIMER_STATS=y
+CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_FTRACE is not set
 CONFIG_DEBUG_STACKOVERFLOW=y
+CONFIG_TIMER_STATS=y
+CONFIG_LATENCYTOP=y
+# CONFIG_FTRACE is not set
 CONFIG_X86_PTDUMP=y
 # CONFIG_DEBUG_RODATA_TEST is not set
 CONFIG_DEBUG_SET_MODULE_RONX=y
 # CONFIG_DOUBLEFAULT is not set
-CONFIG_DEBUG_BOOT_PARAMS=y
 CONFIG_OPTIMIZE_INLINING=y
 CONFIG_KEYS=y
 CONFIG_KEYS_DEBUG_PROC_KEYS=y
 CONFIG_SECURITY=y
 CONFIG_SECURITY_NETWORK=y
-# CONFIG_CRYPTO_HW is not set
 # CONFIG_VIRTUALIZATION is not set
+CONFIG_CRC_T10DIF=y

configs/galileo_defconfig

@@ -1,6 +1,6 @@
 BR2_x86_x1000=y
-# Linux headers same as kernel, a 3.8 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_3_8=y
+# Linux headers same as kernel, a 3.14 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_3_14=y
 # Binutils 2.25 is required as this enables stripping the LOCK prefix
 BR2_BINUTILS_VERSION_2_25_X=y
 BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_MDEV=y
@@ -11,10 +11,10 @@ BR2_ROOTFS_POST_BUILD_SCRIPT="board/intel/galileo/post-build.sh"
 BR2_ROOTFS_POST_IMAGE_SCRIPT="board/intel/galileo/post-image.sh"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_GIT=y
-BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://github.com/mdr78/Linux-x1000.git"
-BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="d1a51d55dc67022be6c2d15163ce6dd28540042f"
+BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://github.com/padraigconnolly/Linux-x1000.git"
+BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="ceeb288e39a4ba10643dec9ffb91baabf313f7d1"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/intel/galileo/linux-3.8.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/intel/galileo/linux-3.14.config"
 BR2_LINUX_KERNEL_INSTALL_TARGET=y
 BR2_TARGET_ROOTFS_EXT2=y
 BR2_TARGET_ROOTFS_EXT2_4=y