We want to use SPDX identifier for license string as much as possible.
SPDX short identifier for LGPLv2.1/LGPLv2.1+ is LGPL-2.1/LGPL-2.1+.
This change is done using following command.
find . -name "*.mk" | xargs sed -ri '/LICENSE( )?[\+:]?=/s/LGPLv2.1(\+)?/LGPL-2.1\1/g'
Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
libpthsem has been affected since quite a while by build issues, but
occuring only on Nathaniel Roach's autobuilder. The failure message
is:
error: #error "Unsupported Linux (g)libc version and/or platform"
This message comes from pth_mctx.c file, which implements five methods
for machine context initialization:
VARIANT 1: THE STANDARDIZED SVR4/SUSv2 APPROACH
VARIANT 2: THE SIGNAL STACK TRICK
VARIANT 3: LINUX SPECIFIC JMP_BUF FIDDLING
VARIANT 4: INTERACTIVE SPECIFIC JMP_BUF FIDDLING
VARIANT 5: WIN32 SPECIFIC JMP_BUF FIDDLING
The "Unsupported (g)libc version and/or platform" only appears when
"VARIANT 4" is used, since VARIANT 4 only supports a very limited
number of platforms. So when building with Nathaniel's autobuilder,
VARIANT 4 is chosen.
However, when you build libpthsem on some other machine than
Nathaniel's autobuilder, VARIANT 2 is chosen, and works regardless of
the glibc version or architecture.
VARIANT 2 is chosen when:
!PTH_MCTX_DSP(sjljlx) &&\
!PTH_MCTX_DSP(sjljisc) &&\
!PTH_MCTX_DSP(sjljw32)
On both Nathaniel's autobuilder, and on a different machine, the
PTH_MCTX_MTH macro gives sjlj:
#define PTH_MCTX_MTH_use PTH_MCTX_MTH_sjlj
However, on a "normal" machine, the PTH_MCTX_DSP macro gives ssjlj:
#define PTH_MCTX_DSP_use PTH_MCTX_DSP_ssjlj
While on Nathaniel's autobuilder, it gives:
#define PTH_MCTX_DSP_use PTH_MCTX_DSP_sjljlx
This explains why VARIANT 4 is being used on Nathaniel's autobuilder,
while VARIANT 2 is used when building on other platforms.
The decision of the value for PTH_MCTX_DSP is derived as follows in
configure.ac:
AC_CHECK_SJLJ(sjlj=yes, sjlj=no, sjlj_type)
[...]
elif test ".$sjlj" = .yes; then
mctx_mth=sjlj
mctx_dsp=$sjlj_type
[...]
AC_DEFINE_UNQUOTED(PTH_MCTX_DSP_use, [PTH_MCTX_DSP_$mctx_dsp], [define for machine context dispatching])
So basically, the value of PTH_MCTX_DSP is $sjlj_type, as returned by
the AC_CHECK_SJLJ autoconf macro, implemented in
acinclude.m4. However, reading this macro is quite informative: it
does a number of tests that are not cross-compile
friendly. Especially, it looks at the kernel version with 'uname -r'
to decide whether the Linux system is braindead or not. If the system
runs a 2.2.x kernel or newer 2.x, or a 3.x kernel, everything is fine,
the system is not braindead, and sjlj_type is set to ssjlj. However,
if the build system runs a 4.x kernel, then it is considered as
braindead, and sjlj_type is set to sjljlx.
And indeed, Nathaniel's autobuilder is running a 4.x kernel, while all
other autobuilders run 2.x or 3.x kernels.
Since for all sane Linux systems, this AC_CHECK_SJLJ macro concludes
that the setjmp/longtmp type is ssjlj, this commit takes the simplest
route of forcing this value, skipping the broken detection.
Note that we're overriding ac_cv_check_sjlj instead of using the
--with-mctx-* options, since the latter do not work properly in the
context of Nathaniel's autobuilder, as the broken cross-compilation
tests continue to cause problems.
Fixes:
http://autobuild.buildroot.org/results/3dd/3dd66d70c2e36f2d9fb0a0fe01bbdec009d55067/
and many similar build failures
This patch has been tested by Nathaniel Roach in the context of his
autobuilder instance which was causing the original problem.
Tested-by: Nathaniel Roach <nroach44@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
argp-standalone provide libargp.a and argp.h which are
never used in libpthsem.
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Autogenerated from rename-patch.py (http://patchwork.ozlabs.org/patch/403345)
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
To be consistent with the recent change of FOO_MAKE_OPT into FOO_MAKE_OPTS,
make the same change for FOO_CONF_OPT.
Sed command used:
find * -type f | xargs sed -i 's#_CONF_OPT\>#&S#g'
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since the trailing slash is stripped from $($(PKG)_SITE) by pkg-generic.mk:
$(call DOWNLOAD,$($(PKG)_SITE:/=)/$($(PKG)_SOURCE))
so it is redundant.
This patch removes it from $(PKG)_SITE variable for BR consistency.
Signed-off-by: Jerzy Grzegorek <jerzy.grzegorek@trzebnica.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit adds the BR2_PACKAGE_LIBPTHSEM_COMPAT option to the
libpthsem package, in order to enable the compatibility with the pth
library, which is useful to support gnupg2.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The need can be patched out by disabling the tests, however the only
package that uses libpthsem (bcusdk) needs a fork-enabled libpthsem so
there's not much point. Fixes:
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
[Peter: remove extra newlines]
[Thomas: various fixes/improvements]
Signed-off-by: Gregory Hermant <gregory.hermant@calao-systems.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
