Like ARM, BR2_ARCH doesn't correspond to the uname -m. With cmake
CMAKE_SYSTEM_PROCESSOR is expected to contain the uname -m value.
So we change CMAKE_SYSTEM_PROCESSOR from powerpc64 -> ppc64 (big endian)
and powerpc64le -> ppc64le (little endian).
This corrects the cross compile to the powerpc64{,le} target
architecture for the mariadb (and possibly others) packages that
use the CMAKE_SYSTEM_PROCESSOR variable and compare it against
Power64 based architectures.
Signed-off-by: Daniel Black <daniel.black@au.ibm.com>
Acked-by: Cyril Bur <cyrilbur@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, we tell cmake where to look for our own custom platform
description by passing the path to the moduls directory on the command
line.
However, this causes two different problems.
First, some packages simply set CMAKE_MODULE_PATH in their
CMakeList.txt, thus overriding our own path, and then our platform
description is not found.
Second, cmake may internally call sub-cmake (e.g. in the try_compile
macro), but the CMAKE_MODULE_PATH is not automatically passed down in
this case.
For the first problem, we could hunt down and fix all offenders, but
this is an endless endeavour, especially since packagers are told to do
so on the cmake wiki [0]:
CMAKE_MODULE_PATH
tell CMake to search first in directories listed in
CMAKE_MODULE_PATH when you use FIND_PACKAGE() or INCLUDE()
SET(CMAKE_MODULE_PATH ${PROJECT_SOURCE_DIR}/MyCMakeScripts)
FIND_PACKAGE(HelloWorld)
The second problem could be solved by passing yet another variable on
the command line, that tells cmake to explicitly pass arbitrary
variables down to sub-cmake calls:
-DCMAKE_TRY_COMPILE_PLATFORM_VARIABLES=CMAKE_MODULE_PATH
However, this only covers the case of try_compile. Even though no other
case is known yet, we'd still risk missing locations where we would need
to propagate CMAKE_MODULE_PATH, even some where we'd have no solution
like for try_compile.
Instead, ngladitz on IRC suggested that CMAKE_MODULE_PATH be set
directly from the toolchain file.
And indeed this fixes both problems explained above.
So be it.
[0] https://cmake.org/Wiki/CMake_Useful_Variables
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Samuel Martin <s.martin49@gmail.com>
Cc: Jörg Krause <joerg.krause@embedded.rocks>
Cc: Ben Boeckel <mathstuf@gmail.com>
Cc: Baruch Siach <baruch@tkos.co.il>
Cc: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The handling of RPATH in cmake-3.7 has changed drastically, causing a
slew of build failures dues to libraries from the host being pulled in:
- domoticz : http://autobuild.buildroot.org/results/fd0/fd0ba54c7abf973691b39a0ca1bb4e07d749593a/
- freerdp : http://autobuild.buildroot.org/results/5d4/5d429d0e288754a541ee5d8be515454c5fccd28b/
- libcec : http://autobuild.buildroot.org/results/3f3/3f3593bab7734dd274faf5b5690895e9424cbb89/
- and so on...
The bug was reported upstream [0], which dismissed it altogether [1] as
being expected behaviour, quoting:
I don't think there is anything wrong with that change on its own.
It merely exposed some existing behavior in a new case.
Instead, upstream suggested in that same message that a platform
definition be used instead, quoting:
If a toolchain file specifies CMAKE_SYSTEM_NAME such that a custom
`Platform/MySystem.cmake` file is loaded then the latter can set
them as needed for the target platform.
So here we are doing so:
- we add a new platfom definitions that inherits from the Linux one,
then overrides the problematic settings;
- we change our toolchain file to use that platform instead;
- we tell cmake where to find additional modules, so that it can find
our custom platform file.
This has been tested to work in the following conditions:
- pre-installed host cmake, versions 3.5.1 (Ubuntu 16.04) and 3.7.2
(manually built)
- internal cmake, versions 3.6.3 (the current version as of this
patch) and 3.7.2 (with the followup patches).
Thanks to Jörg, Ben and Baruch for the help investigating the issue.
Special thanks to Jörg for handling the discussion with upstream and
pointing to the relevant messages! :-)
[0] http://public.kitware.com/pipermail/cmake/2017-February/064970.html
[1] http://public.kitware.com/pipermail/cmake/2017-February/065063.html
To be noted: Thomas suggested we set these directly in the toolchain
file. Unfortunately, wherever we put those settings in the toolchain
file, this does not work.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Jörg Krause <joerg.krause@embedded.rocks>
Cc: Ben Boeckel <mathstuf@gmail.com>
Cc: Baruch Siach <baruch@tkos.co.il>
Cc: Samuel Martin <s.martin49@gmail.com>
Cc: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The Buildroot manual documents that <pkg>_CONF_ENV is passed in the
environment when calling cmake during the configure step. However, the
actual implementation in pkg-cmake passes HOST_<pkg>_CONF_ENV when
configuring the host variant of a cmake package, but does not pass
<pkg>_CONF_ENV when configuring the target variant of a cmake package.
This commit fixes that by passing <pkg>_CONF_ENV in the environment as
expected. It should not cause any behavior change, because this
feature is in fact not used by any package in upstream Buildroot:
$ grep CONF_ENV $(git grep -l cmake-package package/)
package/pkg-cmake.mk:$(2)_CONF_ENV ?=
package/pkg-cmake.mk: $$($$(PKG)_CONF_ENV) $$(BR2_CMAKE) $$($$(PKG)_SRCDIR) \
package/pkg-cmake.mk: $$($$(PKG)_CONF_ENV) $$(BR2_CMAKE) $$($$(PKG)_SRCDIR) \
This issue was reported by Olivier <ovalentin@awox.com> as bug #9616.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The chosen CMAKE_BUILD_TYPE encodes an option of the Buildroot
configuration, so it makes more sense to save it in the
toolchainfile.cmake than to pass it during configure.
It is still possible to override the build type on the cmake
command line.
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Thomas: reword description in the CHANGES file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This reverts commit 4b01201834.
Before reverting this patch, CMake packages are built with the following
options:
* if BR2_ENABLE_DEBUG is set:
The CMake build type is set to RelWithDebInfo, which means:
- Optimization level is forced to: -O2;
- no log nor assert due to -DNDEBUG;
- BR2_DEBUG_{1..3} effect is unchanged;
* otherwise:
The CMake build type is set to Release, which means:
- Optimization level is forced to: -O3;
- no log nor assert due to -DNDEBUG (as expected).
In any case, the optimization WRT the binary size is always ignored
and forced.
Reverting to the previous situation, so Buildroot now chooses between
the 'Debug' and 'Release' config types, which are semantically closer
to what Buildroot does everywhere else:
* if BR2_ENABLE_DEBUG is set:
The CMake build type is set to Debug, which means:
- only -g option is passed by CMake;
- optimization is not forced, nor debug level, so they are kept
as-is;
* otherwise:
The CMake build type is set to Release, so no change in this case:
- Optimization level is forced to: -O3;
- no log nor assert due to -DNDEBUG (as expected);
- size optimization is ignored.
Follow-up patches will fix the CMake flag variables that are appended by
CMake.
Cc: Charles Hardin <ckhardin@exablox.com>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently all cmake packages depend on host-cmake. Unfortunately
host-cmake takes a long time to configure and build: almost 7 minutes
on a dual-core i5 with SSD. The time does not change even with ccache
enabled.
Indeed, building host-cmake is avoidable if it is already installed on
the build host: CMake is supposed to be quite portable, and the only
patch in Buildroot for the CMake package seems to only affect
target-cmake.
Thus we automatically skip building host-cmake and use the one on the
system if:
- cmake is available on the system and
- it is recent enough.
First, we leverage the existing infrastructure in
support/dependencies/dependencies.mk to find out whether there's a
suitable cmake executable on the system. Its path can be passed in the
BR2_CMAKE environment variable, otherwise it defaults to "cmake". If
it is enabled, found and suitable then we set BR2_CMAKE_HOST_DEPENDENCY
to empty; otherwise we set BR2_CMAKE_HOST_DEPENDENCY to 'host-cmake' and
override BR2_CMAKE with "$(HOST_DIR)/usr/bin/cmake" to revert to using
our own cmake (the old behaviour).
Then in pkg-cmake.mk we replace the hard-coded dependency on host-cmake
to using the BR2_CMAKE_HOST_DEPENDENCY variable, and we use $(BR2_CMAKE)
instead of $(HOST_DIR)/usr/bin/cmake.
Unlike what we do for host-tar and host-xzcat, for host-cmake we do
not add host-cmake to DEPENDENCIES_HOST_PREREQ. If we did, host-cmake
would be a dependency for _any_ package when it's not installed on the
host, even when no cmake package is selected.
Cmake versions older than 3.0 are affected by the bug described and
fixed in Buildroot in ef2c1970e4 ("cmake: add patch to fix Qt mkspecs
detection"). The bug was fixed in upstream CMake in version 3.0 [0].
Amongst all the cmake packages currently in Buildroot, the currently
highest version mentioned in cmake_minimum_required() is 3.1 (grantlee
and opencv3).
Thus we use 3.1 as the lowest required cmake for now, until a package is
bumped, or a new package added, with a higher required version.
[0] https://cmake.org/gitweb?p=cmake.git;h=e8b8b37ef6fef094940d3384df5a1d421b9fa568
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Samuel Martin <s.martin49@gmail.com>
Cc: Davide Viti <zinosat@tiscali.it>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Tested-by: Romain Naour <romain.naour@gmail.com>
[yann.morin.1998@free.fr:
- simplify logic in check-host-cmake.mk;
- set and use BR2_CMAKE_HOST_DEPENDENCY, drop USE_SYSTEM_CMAKE;
- bump to cmake 3.1 for grantlee and opencv;
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In 3d475ee0ba a dependency on
host-pkgconf was added to host-cmake. It is a workaround to fix build
failures for packages that use pkgconf through a cmake module, but do
not depend on host-pkgconf as they should.
Since it is the package that needs host-pkgconf and not host-cmake
itself, move the dependency to the proper place, in pkg-cmake.mk.
Also copy the explanation on the mentioned commit as a comment in
order to clarify why we do this.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Samuel Martin <s.martin49@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Davide Viti <zinosat@tiscali.it>
Cc: Arnout Vandecappelle <arnout@mind.be>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Thomas:
- update on top of master
- drop empty HOST_CMAKE_DEPENDENCIES, no longer needed since host
dependencies are no longer derived from target dependencies.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since the fortran support is conditional, only enable it when needed.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Cc: Benjamin Kamath <bkamath@spaceflight.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This feature consists in automatically deducing dependencies of a host
package from the dependencies of the target variant.
However, it causes some issues, and many host packages need different
dependencies than their target variants.
Now that host dependencies are explicitly set for all packages, we can
remove it.
Signed-off-by: Julien Floret <julien.floret@6wind.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
>From the documentation on BR2_ENABLE_DEBUG, the intention is to get
a build with debug symbols and not a "debug build" since that can have
the unintended consequence of being a different code path then a
release build type definition.
Switch the "Debug" to "RelWithDebInfo" in the cmake package support
to accomodate getting the debug symbols and still be a release
build.
Signed-off-by: Charles Hardin <ckhardin@exablox.com>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
All the complexity with the different ways that CMAKE_C_COMPILER and
CMAKE_C_COMPILER_ARG1 can be set are no longer needed, it's all handled
by the toolchain wrapper now.
Note that it is still necessary to handle this for the host build.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Switch from : to # since CFLAGS can include :'s spilled in from
BR2_TARGET_OPTIMIZATION, for example:
BR2_TARGET_OPTIMIZATION="-Wl,-rpath,/lib:/usr/lib" would cause the sed
expression to fail thus breaking the build.
Signed-off-by: Gustavo Zacarias <gustavo.zacarias@free-electrons.com>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Create a proper package for the skeleton.
The main Makefile is modified to remove the skeleton support.
The 'dirs' target, will create the $(TARGET_DIR).
The file 'output/target/.root' doesn't exists anymore, as there's no
Make rule to statisfy.
The infrastructure are modified to filter host-skeleton.
It's needed becauses the host-dependencies are derived from the
dependencies of the target package where 'host-' is preprended to the
depedency name.
In the pkg-generic we add skeleton as a dependency to every package.
The whole system/system.mk is now removed at the profit of
package/skeleton/skeleton.mk
[Thomas:
- rebase on top of master and fix some minor conflicts
- remove the 'select BR2_PACKAGE_SKELETON' in
BR2_ROOTFS_SKELETON_DEFAULT and BR2_ROOTFS_SKELETON_CUSTOM, since
anyway the skeleton package is always enabled.
- fixup a few mistakes in the getty handling due to misnamed
variables.]
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
With CMake build system, the "make install" command always compiles
before installing, to make sure that everything is up-to-date.
In Buildroot environment, this is quite useless, because the package
has always already been compiled, either at first build, or when
invoking "make <package>-rebuild".
In all cases, when it comes to staging or target installation step, the
package has just been compiled.
Using "make install/fast" - in order to skip the compilation step - is
therefore more appropriate, more consistent with what other build
systems do, and saves time when you need to rebuild your package.
Signed-off-by: Cédric Marie <cedric.marie@openmailbox.org>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
For some cmake based packages, like GNURadio, it's forbidden to do the
compilation directly in the sources directory. This patch add a new
variable to specify, if needed, the name of a sub-directory used to compile.
[Thomas: put the documentation at the right place in the manual, not
in the middle of the <pkg>_CONF_OPTS description.]
Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@trabucayre.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Assaf Inbal <shmuelzon@gmail.com>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Use CMAKE_RULE_MESSAGES and CMAKE_INSTALL_MESSAGE variables to reduce
cmake output when it is a silent build.
[Thomas:
- use ifneq instead of ifdef
- remove unneeded else clause
- also add to the host variant of the configure commands]
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When trying to compile a host-cmake-package type such as host-cdrkit,
an error happens in regards to HOSTCC and HOSTCXX not being found.
/bin/sh: HOSTCC: command not found
/bin/sh: HOSTCXX: command not found
This due to the fact that the environment is incorrectly configured by
having the following:
-DCMAKE_C_COMPILER=""$(HOSTCC)"" -DCMAKE_CXX_COMPILER=""$(HOSTCXX)""
This is due to having too many dollar signs. The fix is to remove the
extra dollar sign.
Also removing the unncessary quotes since the HOSTCC/HOSTCXX will
already contain quotes. This could cause an issue with make as double
quotes are not interpreted by make.
Minor formatting fix too.
Signed-off-by: Ryan Barnett <ryan.barnett@rockwellcollins.com>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This ccache support for host-cmake-package uses the same logic as the
one done for the target packages in the toolchainfile.cmake file.
[Thomas: fix lots of mistakes.]
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since a while, the semantic of BR2_PREFER_STATIC_LIB has been changed
from "prefer static libraries when possible" to "use only static
libraries". The former semantic didn't make much sense, since the user
had absolutely no control/idea of which package would use static
libraries, and which packages would not. Therefore, for quite some
time, we have been starting to enforce that BR2_PREFER_STATIC_LIB
should really build everything with static libraries.
As a consequence, this patch renames BR2_PREFER_STATIC_LIB to
BR2_STATIC_LIBS, and adjust the Config.in option accordingly.
This also helps preparing the addition of other options to select
shared, shared+static or just static.
Note that we have verified that this commit can be reproduced by
simply doing a global rename of BR2_PREFER_STATIC_LIB to
BR2_STATIC_LIBS plus adding BR2_PREFER_STATIC_LIB to Config.in.legacy.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
This is rarely needed by packages, but convenient to have when it is.
[Thomas:
- don't define ARM_VARIANT as this name is too global, use
CMAKE_SYSTEM_PROCESSOR_ARM_VARIANT instead.
- don't use ifndef, but a more traditional else clause, for the
non-ARM cases.]
Signed-off-by: Volker Krause <volker.krause@kdab.com>
Reviewed-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Reviewed-by: Romain Naour <romain.naour@openwide.fr>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Because cmake was the only build-system supporting this feature, it has been
disabled for the target packages.
For consistency, this patch does the same for host package too.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch globally disables doc, examples and tests build for both the
target and host packages.
If needed, these configure flags can be overloaded in the per-package
*_CONF_OPTS variables.
This makes the cmake-package infrastructure even closer to the autotools
one.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch renames, consistently with the other package
infrastructures, the _INSTALL_OPTS variable for host CMake-based
package.
As mentioned in [1], no host-cmake-package uses this variable so far;
so it is a safe rename.
[1] http://lists.busybox.net/pipermail/buildroot/2014-October/107712.html
Reported-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
To be consistent with the recent change of FOO_MAKE_OPT into FOO_MAKE_OPTS,
make the same change for FOO_CONF_OPT.
Sed command used:
find * -type f | xargs sed -i 's#_CONF_OPT\>#&S#g'
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
To be consistent with the recent change of FOO_MAKE_OPT into FOO_MAKE_OPTS,
make the same change for FOO_INSTALL_HOST_OPT.
Sed command used:
find * -type f | xargs sed -i 's#_INSTALL_HOST_OPT\>#&S#g'
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
To be consistent with the recent change of FOO_MAKE_OPT into FOO_MAKE_OPTS,
make the same change for FOO_INSTALL_STAGING_OPT.
Sed command used:
find * -type f | xargs sed -i 's#_INSTALL_STAGING_OPT\>#&S#g'
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
To be consistent with the recent change of FOO_MAKE_OPT into FOO_MAKE_OPTS,
make the same change for FOO_INSTALL_TARGET_OPT.
Sed command used:
find * -type f | xargs sed -i 's#_INSTALL_TARGET_OPT\>#&S#g'
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
While the autotools infrastructure was using FOO_MAKE_OPT, generic packages
were typically using FOO_MAKE_OPTS. This inconsistency becomes a problem
when a new infrastructure is introduced that wants to make use of
FOO_MAKE_OPT(S), and can live alongside either generic-package or
autotools-package. The new infrastructure will have to choose between either
OPT or OPTS, and thus rule out transparent usage by respectively generic
packages or generic packages. An example of such an infrastructure is
kconfig-package, which provides kconfig-related make targets.
The OPTS variant is more logical, as there are typically multiple options.
This patch renames all occurrences of FOO_MAKE_OPT in FOO_MAKE_OPTS.
Sed command used:
find * -type f | xargs sed -i 's#_MAKE_OPT\>#&S#g'
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The linker flags are part of the toolchain configuration, so set them for
the CMake-based packages.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The USE_CCACHE CMake flag is only useful when building target package
(only the toolchainfile.cmake uses it).
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In English, unlike in French, almost all usages of the word 'information'
are uncountable, meaning that 'informations' is invalid.
This patch fixes this typo throughout the tree, except in CHANGES and
docs/news.html (historic text).
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In English, unlike in French, the 'h' in 'host' is pronounced, meaning that
the article should be 'a' instead of 'an'.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The inner-xxx-targets in the buildroot package infrastructures are
evaluated using $(eval) which causes variable references to be a bit
different than in regular make code. As we want most references to be
expanded only at the time of the $(eval) we should not use standard
references $(VAR) but rather use double dollar signs $$(VAR). This includes
function references like $(call), $(subst), etc. The only exception is the
reference to pkgdir/pkgname and numbered variables, which are parameters to
the inner block: $(1), $(2), etc.
This patch introduces consistent usage of double-dollar signs throughout the
different inner-xxx-targets blocks.
In some cases, this would potentially cause circular references, in
particular when the value of HOST_FOO_VAR would be obtained from the
corresponding FOO_VAR if HOST_FOO_VAR is not defined. In these cases, a test
is added to check for a host package (the only case where such constructions
are relevant; these are not circular).
Benefits of these changes are:
- behavior of variables is now again as expected. For example, setting
$(2)_VERSION = virtual in pkg-virtual.mk will effectively work, while
originally it would cause very odd results.
- The output of 'make printvars' is now much more useful. This target shows
the value of all variables, and the expression that led to that value.
However, if the expression was coming from an inner-xxx-targets block, and
was using single dollar signs, it would show in printvars as
VAR = value (value)
while if double dollar signs are used, it would effectively look like
VAR = value (actual expression)
as is intended.
This improvement is for example effective for FOO_DL_VERSION, FOO_RAWNAME,
FOO_SITE_METHOD and FOO_MAKE.
The correctness of this patch has been verified using 'make printvars',
'make manual' and 'make legal-info' before and after applying this patch,
and comparing the output.
Insight-provided-by: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This CMake flag is usually used to adjust compiler flags (like: -Ox, -g,
etc).
So, it makes sense for Buildroot to globally drive this CMake flags in
the cmake-package infrastructure.
However, if a package prefer overriding this default setting, it still
can via the <PKG>_CONF_OPT variable.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This CMake flag is used to enable tests. It may not disable the test
programs from being built, but it controls the test execution.
Since we don't care about building the tests (and usually disable them
when possible), make sure Buildroot won't try to run them.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch updates the generated toolchainfile.cmake to use ccache.
When toolchainfile.cmake is used inside Buildroot, using ccache during
the build is driven by a CMake knob: USE_CCACHE, automatically set by
the cmake-package infrastructure and reflecting the BR2_CCACHE value.
Since this toolchainefile.cmake file can be used outside Buildroot, and
this file also set a couple of things (among these: the sysroot cflag,
some pkg-config environment variables), it is important to set the
compiler variables as well to keep the consistency of the
cross-compilation configuration.
So, when it is used outside Buildroot, using ccache for the build is
driven by the ccache program availability.
Note that using ccache for the build is achieved by setting the *_ARG1
CMake variables to let CMake use ccache without failing in detecting
the compiler.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Cc: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The patch allows sharing or moving the toolchains.
This is a step toward making the toolchain/sdk relocatable.
Closes#6818
[Peter: reword comment as suggested by Thomas]
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Cc: Uwe Strempel <u.strempel@googlemail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch introduces a toolchainfile.cmake.in template which is filled
by Buildroot.
Using a toolchainfile.cmake.in template file allows to avoid overloading
quoting and/or escaping and it becomes much more similar to the
resulting file.
This patch also cleans up the quoting style.
[Peter: drop stdin redirect as suggested by Thomas]
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
printf is POSIX-compliant, echo -e is not.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Because BR_PATH is not exported in the environment beforehand running
cmake, it is necessary to add it on the cmake configure command.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit makes the dependency from the target toolchain explicit.
This way we can buid from command line a package that use
inner-generic-package right after the configuration phase, example:
make clean <package-name>
Also remove TARGETS_ALL because the only purpose was to add toolchain
dependency so it's superseded by this commit.
To prevent circular dependency add the new variable
<pkgname>_ADD_TOOLCHAIN_DEPENDENCY to avoid adding the toolchain
dependency for toolchain packages.
This is also a step forward supporting top-level parallel make.
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The fourth parameter to inner-generic-package is no longer used. Removing
this parameters requires renaming all usages of $(5) to $(4), and updating
the calls to inner-generic-package (and equivalent for the other package
infrastructures).
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When calling make 'functions', the $(call) keyword is only needed if the
function takes arguments. For pkgdir, pkgname and pkgparentdir this is not
the case, so we can remove the call to make things more readable.
Suggested-by: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
cmake is the only build-system we support that does colour its output,
Also, since parallel builds generates intermixed output lines, it makes
for ugly-looking output.
Just disable cmake colouring globally.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
CMake offers a couple of places where one can specify how to build a
library:
- when you create the library target itself, by calling
add_library(target [SHARED|STATIC] ...)
- or globally, when you configure the build, by setting the
BUILD_SHARED_LIBS CMake flag.
* if the library target kind of library is specified:
it overrides the global setting BUILD_SHARED_LIBS;
* else, if the global setting BUILD_SHARED_LIBS is set:
it builds according to the BUILD_SHARED_LIBS flags;
* otherwise:
for linux, it will build static library (like BUILD_SHARED_LIBS
default is OFF).
So, we can consider the setting BUILD_SHARED_LIBS acts a bit similarly
to the autotools ones '--disable-static' and '--enable-shared'.
Thus, it makes sense for Buildroot to globally drive to CMake flags in
the cmake-package infrastructure.
It seems we never trigger this so far because:
- either we specified it in the *.mk file (e.g. opencv.mk);
- or it was already set per target by the projects' upstreams.
Followup patches will clean the remaining BUILD_SHARED_LIBS in the
package *.mk files.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>