- Update the "basic set" description to include fincore, which is built
by default, and remove tailf, which was removed in this version.
- Add configuration options for the new utilities "chmem" and "lsmem".
- Add a patch to revert the assumption that ncursesw headers are under
/usr/include/ncursesw/ only. That's necessary to have both versions
for ABI/API compatibility but does not make sense on embedded systems.
- Drop autoreconf, since the patch on term-utils/Makemodule.am is gone.
The patch is a bit drastic but it solves the problem of using ncursews
while we discuss a better solution in the util-linux mailing list.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- Update the "basic set" description to include fincore, which is built
by default, and remove tailf, which was removed in this version.
- Add configuration options for the new utilities "chmem" and "lsmem".
- Remove patch already applied upstream.
- Drop autoreconf, since the patch on term-utils/Makemodule.am is gone.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Respect the <tab><2 spaces><62 chars> rule.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We have started using SPDX short identifier for license string in
<PKG>_LICENSE variable. But license strings in comments are still
using old strings. For consistency, use SPDX short identifier in
comments as well.
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We want to use SPDX identifier for license string as much as possible.
SPDX short identifier for BSD-4c is BSD-4-Clause.
This change is done using following command.
find . -name "*.mk" | xargs sed -ri '/LICENSE( )?[\+:]?=/s/BSD-4c/BSD-4-Clause/g'
Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We want to use SPDX identifier for license string as much as possible.
SPDX short identifier for BSD-3c is BSD-3-Clause.
This change is done using following command.
find . -name "*.mk" | xargs sed -ri '/LICENSE( )?[\+:]?=/s/BSD-3c/BSD-3-Clause/g'
Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We want to use SPDX identifier for license string as much as possible.
SPDX short identifier for LGPLv2.1/LGPLv2.1+ is LGPL-2.1/LGPL-2.1+.
This change is done using following command.
find . -name "*.mk" | xargs sed -ri '/LICENSE( )?[\+:]?=/s/LGPLv2.1(\+)?/LGPL-2.1\1/g'
Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We want to use SPDX identifier for license strings as much as possible.
SPDX short identifier for GPLv2/GPLv2+ is GPL-2.0/GPL-2.0+.
This change is done by using following command.
find . -name "*.mk" | xargs sed -ri '/LICENSE( )?[\+:]?=/s/\<GPLv2\>/GPL-2.0/g'
Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit a5015f1025 ("util-linux: security
bump to version 2.29.2") incorrectly removed <pkg>_AUTORECONF = YES.
While the patches touching configure.ac have indeed been removed, there
is still a patch touching a Makemodule.am file, which triggers an
autoreconf a build time, which itself fails because autoconf/automake
are not available.
So re-add <pkg>_AUTORECONF, with a comment pointing specifically at the
patch that makes it necessary.
Fixes:
http://autobuild.buildroot.net/results/309127a532eed00e406bbaf0b1a51b7241a10505/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
From https://www.kernel.org/pub/linux/utils/util-linux/v2.29/v2.29.2-ReleaseNotes
This release fixes su(1) security issue CVE-2017-2616:
It is possible for any local user to send SIGKILL to other processes with root
privileges. To exploit this, the user must be able to perform su with a
successful login. SIGKILL can only be sent to processes which were executed
after the su process. It is not possible to send SIGKILL to processes which
were already running.
Drop upstream patches and autoreconf since it's no longer required.
[Peter: extend commit message with CVE info / description]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Pull an upstream fix to allow building schedutils (ionice, taskset,
chrt) when util-linux is configured with
$ configure --disable-all-programs --enable-schedutils
Fixes:
https://bugs.busybox.net/show_bug.cgi?id=9656
Reported-by: Aaron Holtzman <aholtzma@gmail.com>
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit 55a9737895 ("util-linux: link scriptreplay with libm (for isnan)")
added two patches that touch configure.ac and Makemodule.am. But forgot
to enable AUTORECONF.
When AUTORECONF is disabled and configure.ac is patched, it looks like
make will detect change in timestamps and trigger reconfig. But it
later fails because of missing dependencies. To fix this, explicitly
enable AUTORECONF.
Fixes:
http://autobuild.buildroot.net/results/544/544e8da290d40424ea3d1bffad7e0b8a566de495
Fixes: 55a9737895 ("util-linux: link scriptreplay with libm (for isnan)")
Signed-off-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
Cc: Carlos Santos <casantos@datacom.ind.br>
Acked-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch adds optional libselinux support to the util-linux package,
and also tweaks the PAM files instealled by util-linux to work properly
in an SELinux context.
Like was done for linux-pam, the tweak is done by having the SELinux
related lines commented out in the original PAM file, and uncommented
when SELinux support is enabled.
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Clayton Shotwell <clayton.shotwell@rockwellcollins.com>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Niranjan Reddy <niranjan.reddy@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Bryce Ferguson <bryce.ferguson@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This reverts commit 5a18eabdf0.
It did not take into account all the possible situations. A different fix
will be provided in a forthcomming patch.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since commit 006a328ad6 ("util-linux: fix
build with ncurses"), we have a build failure that occurs with musl
toolchains when wide-char support is not enabled in ncurses.
The problem comes from the fact that musl provides wchar support (so it
defines wchar_t). But when ncursesw is not available, we currently pass
--disable-widechar which tells util-linux that wchar support is not
available at all (not only in ncurses). When this gets passed to
util-linux configure script, then it defines its own wchar_t, which
conflicts with the musl definition.
So, we should not pass --disable-widechar when BR2_USE_WCHAR=y, which is
what this commit does: it moves the BR2_USE_WCHAR logic outside of the
ncurses logic, and passes --enable-widechar/--disable-widechar as
appropriate.
However, there's a gotcha: util-linux really wants the ncursesw variant
of ncurses when the system has wchar support enabled. We take this into
account by:
- Enabling ncursesw when BR2_PACKAGE_NCURSES_WCHAR=y. In this case, we
have ncurses and we have BR2_USE_WCHAR=y, so everything is fine.
- Otherwise, enabling ncurses when BR2_PACKAGE_NCURSES=y but
BR2_USE_WCHAR is disabled.
To make sure that the existing util-linux programs that need ncurses
support still build fine, we adjust the Config.in to select
BR2_PACKAGE_NCURSES_WCHAR on BR2_USE_WCHAR=y configurations.
Fixes:
http://autobuild.buildroot.net/results/19de2a0b12380ddc86dbba0dae3a3877b25f83ff/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
util-linux version 2.29 changed ncurses handling a lot. pkg-config
support to detect ncurses is removed from configure.ac and
ncurses-config is used to detect it. But it even didn't allow to
change config file for cross compilation. However, it is fixed in
upstream later and pkg-config support is added back.
This commit adds two patches from upstream that adds pkg-config support
and allows specifying ncurses-config file as well. However preference is
first given to pkg-config and later ncurses-config file. It also first checks
for version 6 and later 5.
Config option that changed are, ncursesw is enabled by default and ncurses
is disabled by default. So we need to explicilty specify with/without wide
char support now. This new version also allows disabling widechar support.
But it can't be enabled if ncurses without widechar support is enabled.
While building ncurses package, we explicitly enable pkg-config support,
so we don't need to specify ncurses-config file, but it is specified for
completeness.
Fixes:
http://autobuild.buildroot.net/results/4a2/4a25fb0d4546391d5dbbaa6cde17c45aeddb3549
Signed-off-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
Cc: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
lib/colors.c uses HAVE_LIBTINFO to decide whether term.h and ncurses.h
should be included. However, the configure.ac check is bogus: it
checks for tinfo using pkg-config, and then if it fails, checks with
AC_CHECK_LIB(). So, if you have tinfo installed, but not the
corresponding development package, the pkg-config test will fail, but
the AC_CHECK_LIB test will succeed, even though the headers are not
available.
To address this, we explicitly tell host-util-linux that tinfo is not
available, like we're already doing for ncurses.
Fixes:
http://autobuild.buildroot.net/results/3c447e601a7b728860e78cabf2191ab206e6480d/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When even a single extra util-linux utility is enabled, the default
build and install will install many more programs, including many that
overlap with those offered by busybox.
Fix by reworking the install-utilies menu to take advantage of the new
--disable-all-programs config option. This option make it possible to
disable the basic set of apps, and then enable only the desired apps.
Original patch by Danomi Manchego, visible at
http://patchwork.ozlabs.org/patch/494866/
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
[Thomas/Arnout: remove the choice between all/custom/no, and simply have
a list of options with the basic set of tools, and then one option for
each tool. This gives the same flexibility, but avoids the choice, which
is never nice to have.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- Add option to control installation of libfdisk
- Add libfdisk license to the comment in util-linux.mk
- List all utilities provided by the basic set and document that
linux32, linux64, uname26, i386 and x86_64 are symlinks to setarch
- Add options to install cal, ipcrm, ipcs, logger, lslogin and pg
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
[Thomas: add missing dependency of the new lslogins option on
libsmartcols, and therefore !MMU.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fix several problems in the package recipe:
- Make 'bool "lib<foo>"' the first item in each block
- Move the depends before the selects
- Add missing dependencies on BR2_USE_MMU, for fork()
- Improve help for cramfs utilities and login utilities
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
[Thomas:
- remove capitalization of prompts, for consistency
- add missing dependencies on libsmartcols, and therefore !MMU]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When linking both zlib and libblkid statically in the same target a
collision occurs. Fix this by prefixing publicly-visible crc32 library
functions. Fixes:
http://autobuild.buildroot.net/results/25e/25efb79dd6ff1d93b5775baeccda23194d68c711/
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It's a necessary dependency to build the new host-libglib2.
libblkd is an indirect dependency for libmount.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When linking statically with -lreadline we also need to specify
-lcurses. We were already passing LIBS=-intl to fix gettext related
issues, so we refactor how LIBS is passed so that several values can be
passed.
It is worth mentioning that:
1. Passing LIBS= at configure time is not sufficient, because the
configure script does LIBS="" at its end. So in order for the LIBS
value to also be effective during the build, it needs to be passed
in MAKE_OPTS as well.
2. LIBS=-lintl was only passed at build time (it was not needed for any
of the configure tests). However, LIBS=-lncurses is needed both at
configure time (for configure tests) and at build time. Therefore,
the new variable UTIL_LINUX_LIBS gets passed as the LIBS value at
both configure time and build time.
Fixes:
http://autobuild.buildroot.net/results/70e0a273e699c73c6b2ab2a19c8f7ebb1ddee6cdehttp://autobuild.buildroot.net/results/6a7faf8adbffd9437c0117b9f0e89684c24dad23
Signed-off-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
login and hwclock can be built with audit support. This patch adds
optional dependency on audit package if it is already selected.
Signed-off-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
fdisk and sfdisk tools can be built with readline support. This patch
adds optional dependency on readline if it is already selected.
Signed-off-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
--enable-findfs and --enable-lsblk configure options don't exist
anymore. Now, findfs and lsblk are always built by default unless you
pass --disable-all-programs to the configure script.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Upstream has this patch a while and other projects are using
it already. So better switch to this.
Signed-off-by: Waldemar Brodkorb <wbx@uclibc-ng.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Following the removal of eglibc support, this commit replaces all
occurences of "(e)glibc" by just "glibc". Most of the occurences are in
package Config.in comments.
In addition, when the form "an (e)glibc ..." was used, it is replaced by
"a glibc ...".
[Peter: add new efi* packages, s/uclibc/uClibc as suggested by Romain,
systemd / liquid-dsp tweaks as suggested by Yann]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Instead of installing login.pam (/etc/pam.d/login) from util-linux
conditionally do so unconditionally from linux-pam.
If busybox login is pam-enabled (linux-pam package enabled) it will be
required, otherwise it will lead to a system where login won't work, and
if util-linux is enabled it will supercede busybox login and will be
necesarry regardless.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
lsipc segfault when no option is given.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The compiler bug has been fixed in CS nios2 2015.11.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit adds an option to the util-linux package that allows to
build the lsblk utility.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch is not needed anymore since the uClibc support has been removed from
Buildroot. This patch was needed for uClibc <= 0.9.33 support.
The only remaining supported external toolchain using uClibc 0.9.33 is the
2014R1 bfin toolchain. But all features that needs mkostemp() require fork() [1].
So, we can safely remove the patch.
[1] http://lists.busybox.net/pipermail/buildroot/2016-February/153414.html
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As reported by Thomas Petazzoni [1], the libsmartcols library can't
be used on no-MMU platform since fork() is used.
[1] http://lists.busybox.net/pipermail/buildroot/2016-February/153414.html
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
