This patch adds CPE ID information for a significant number of
packages.
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit 1ebb35ee5f changed the libopenssl
target architecture to 'linux-generic64' for 64-bit archs based on
BR2_ARCH_IS_64. However, MIPS64n32 has BR2_ARCH_IS_64 set, but is a 32-bit
ABI. On such board, libopenssl needs to be configured with linux-generic32
to function properly.
One symptom of this problem is that ssh-keygen hangs on key generation,
waiting for more random bits. See [1] for the discussion with openssl
upstream.
Thanks to Ronny Meeus for investigating the issue and kudos to the openssl
community for their responsive and helpful interaction!
Reported-by: Ronny Meeus <ronny.meeus@nokia.com>
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
[1] https://mta.openssl.org/pipermail/openssl-users/2020-June/012565.html
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
musl libc uses ELFv2 by default for all PPC64 targets.
Now, OpenSSL libraries built with musl targeting PPC64BE should build
and function as expected.
Signed-off-by: Vincent Fazio <vfazio@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This fixes CVE-2020-1967:
Server or client applications that call the SSL_check_chain() function during
or after a TLS 1.3 handshake may crash due to a NULL pointer dereference as a
result of incorrect handling of the "signature_algorithms_cert" TLS extension.
The crash occurs if an invalid or unrecognised signature algorithm is received
from the peer. This could be exploited by a malicious peer in a Denial of
Service attack. OpenSSL version 1.1.1d, 1.1.1e, and 1.1.1f are affected by this
issue. This issue did not affect OpenSSL versions prior to 1.1.1d.
See https://www.openssl.org/news/secadv/20200421.txt
Also update the hash file to the new two spaces convention
Signed-off-by: Titouan Christophe <titouan.christophe@railnova.eu>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes the following security issues (1.1.1e):
CVE-2019-1551 [Low severity]: There is an overflow bug in the x64_64
Montgomery squaring procedure used in exponentiation with 512-bit moduli.
No EC algorithms are affected. Analysis suggests that attacks against
2-prime RSA1024, 3-prime RSA1536, and DSA1024 as a result of this defect
would be very difficult to perform and are not believed likely. Attacks
against DH512 are considered just feasible. However, for an attack the
target would have to re-use the DH512 private key, which is not recommended
anyway. Also applications directly using the low level API BN_mod_exp may
be affected if they use BN_FLG_CONSTTIME. Reported by OSS-Fuzz and Guido
Vranken.
https://www.openssl.org/news/secadv/20191206.txt
CVE-2019-1563 [Low severity]: In situations where an attacker receives
automated notification of the success or failure of a decryption attempt an
attacker, after sending a very large number of messages to be decrypted, can
recover a CMS/PKCS7 transported encryption key or decrypt any RSA encrypted
message that was encrypted with the public RSA key, using a Bleichenbacher
padding oracle attack. Applications are not affected if they use a
certificate together with the private RSA key to the CMS_decrypt or
PKCS7_decrypt functions to select the correct recipient info to decrypt.
Reported by Bernd Edlinger.
https://www.openssl.org/news/secadv/20190910.txt
Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
[Peter: mention security impact]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since e3159cad71 (package/libopenssl: move target arch selection
to Config.in), we have a Config.in that contains a few options to
configure libopenssl (openSSL, the original).
As such, it makes sense to move the remaining options there too.
We also move the condition there, mimicking what is done for the
external toolchains' options too.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Matt Weber <matthew.weber@rockwellcollins.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The logic to select the proper OpenSSL target arch in libopenssl.mk is
not easy to read, so let's move it to Config.in where we have some
nice constructs for that kind of value selection.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fixes the following security vulnerabilities:
- ECDSA remote timing attack (CVE-2019-1547)
Severity: Low
- Fork Protection (CVE-2019-1549)
Severity: Low
- Padding Oracle in PKCS7_dataDecode and CMS_decrypt_set1_pkey (CVE-2019-1563)
Severity: Low
For more details, see the advisory:
https://www.openssl.org/news/secadv/20190910.txt
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
no-dso option has been removed with
31b6ed76df
To fix this error, use "gcc" target in static builds. This target is
very minimalistic, we need to manually pass -lpthread and
-DOPENSSL_THREADS however we can also remove libdl workarounds
Fixes:
- http://autobuild.buildroot.org/results/96d6b89d20980e8f7fa450b832474a81d492b315
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issues:
Prevent over long nonces in ChaCha20-Poly1305 (CVE-2019-1543)
ChaCha20-Poly1305 is an AEAD cipher, and requires a unique nonce input for
every encryption operation. RFC 7539 specifies that the nonce value (IV)
should be 96 bits (12 bytes). OpenSSL allows a variable nonce length and
front pads the nonce with 0 bytes if it is less than 12 bytes. However it
also incorrectly allows a nonce to be set of up to 16 bytes. In this case
only the last 12 bytes are significant and any additional leading bytes are
ignored.
It is a requirement of using this cipher that nonce values are unique.
Messages encrypted using a reused nonce value are susceptible to serious
confidentiality and integrity attacks. If an application changes the
default nonce length to be longer than 12 bytes and then makes a change to
the leading bytes of the nonce expecting the new value to be a new unique
nonce then such an application could inadvertently encrypt messages with a
reused nonce.
Additionally the ignored bytes in a long nonce are not covered by the
integrity guarantee of this cipher. Any application that relies on the
integrity of these ignored leading bytes of a long nonce may be further
affected. Any OpenSSL internal use of this cipher, including in SSL/TLS, is
safe because no such use sets such a long nonce value. However user
applications that use this cipher directly and set a non-default nonce
length to be longer than 12 bytes may be vulnerable.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Drop patches 4..6 as they are now upstream.
Update the hash of the license file as the copyright dates changed.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
For details see https://bugs.archlinux.org/task/61623
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
OPENSSL_SMALL_FOOTPRINT mode selects alternate paths in the sha512 and
blake2 algorithms which resolves a assembler issue like the following.
/tmp/ccfnLhKQ.s: Assembler messages:
/tmp/ccfnLhKQ.s:11167: Error: value -32790 out of range
make[2]: *** [crypto/blake2/blake2b.o] Error 1
This issue was found after the OpenSSL1.1.x bump.
Fixes
http://autobuild.buildroot.net/results/533e817695cde321b725145112cfd83c092d9d75
Upstream ticket
https://github.com/openssl/openssl/issues/8190
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- use BR2_TOOLCHAIN_HAS_UCONTEXT
This is used to set -DOPENSSL_NO_ASYNC if needed.
- apply the CFLAGS correctly when compiling with -Os (bugfix).
- use -latomic when needed
This fixes the build for br-sparc-uclibc-2018.05
- don't use madvise() if no MMU
Trying to do so results in undefined reference to madvise() as
it is not available on uclibc without MMU.
The original openssl code checks if a macro used in the madvise call
is defined. The problem comes from the fact that the code in
crypto/mem_sec.c also includes a kernel header defining the same macro
unconditionally. Thus the check is always true in that case.
Upstream: https://github.com/openssl/openssl/pull/8089
- don't compile test/fuzzers
These binaries introduced with 1.1.x sometimes do not compile.
This is the case with the br-arm-cortex-m4-full toolchain
- don't build ocsp daemon if no MMU.
Patch from Richard Levitte.
- correctly enable cryptodev engine
Thanks to Arnout Vandecappelle for spotting this.
- remove all parallel build patches (openssl build-system changed)
- rebased 0001-Dont-waste-time-building-manpages-if-we-re-not-going.patch
to apply to Configurations/unix-Makefile.tmpl (Makefile template)
- removed 0002-cryptodev-Fix-issue-with-signature-generation.patch
(upstream applied)
- rebased 0003-Reproducible-build-do-not-leak-compiler-path.patch to
apply to crypto/build.info (Makefile template)
- fix musl/uclibc build failure, use '-DOPENSSL_NO_ASYNC'
- remove legacy enable-tlsext configure option
- remove target/host libdir configure options, fixes openssl.pc installation
path, fixes wget compile
- change legacy INSTALL_PREFIX to DESTDIR
- remove 'libraries gets installed read only, so strip fails'
workaround (not needed anymore)
- change engine directory from /usr/lib/engines to
/usr/lib/engines-1.1
- change license file hash, no license change, only the following
hint was removed:
Actually both licenses are BSD-style Open Source licenses.
In case of any license issues related to OpenSSL please
contact openssl-core@openssl.org.
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Tested-by: Ryan Coe <bluemrp9@gmail.com>
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>
Signed-off-by: Patrick Havelange <patrick.havelange@essensium.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The host forces HTTPS regardless. This can be seen in the build logs:
>>> host-libopenssl 1.0.2q Downloading
URL transformed to HTTPS due to an HSTS policy
--2018-12-10 09:53:27-- https://www.openssl.org/source/openssl-1.0.2q.tar.gz
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes the following security vulnerabilities:
*) Microarchitecture timing vulnerability in ECC scalar multiplication
OpenSSL ECC scalar multiplication, used in e.g. ECDSA and ECDH, has been
shown to be vulnerable to a microarchitecture timing side channel attack.
An attacker with sufficient access to mount local timing attacks during
ECDSA signature generation could recover the private key.
This issue was reported to OpenSSL on 26th October 2018 by Alejandro
Cabrera Aldaya, Billy Brumley, Sohaib ul Hassan, Cesar Pereida Garcia and
Nicola Tuveri.
(CVE-2018-5407)
[Billy Brumley]
*) Timing vulnerability in DSA signature generation
The OpenSSL DSA signature algorithm has been shown to be vulnerable to a
timing side channel attack. An attacker could use variations in the signing
algorithm to recover the private key.
This issue was reported to OpenSSL on 16th October 2018 by Samuel Weiser.
(CVE-2018-0734)
[Paul Dale]
For more information, see the changelog:
https://www.openssl.org/news/cl102.txt
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issues:
Constructed ASN.1 types with a recursive definition could exceed the stack
(CVE-2018-0739)
Constructed ASN.1 types with a recursive definition (such as can be found in
PKCS7) could eventually exceed the stack given malicious input with
excessive recursion. This could result in a Denial Of Service attack.
There are no such structures used within SSL/TLS that come from untrusted
sources so this is considered safe.
Incorrect CRYPTO_memcmp on HP-UX PA-RISC (CVE-2018-0733)
Because of an implementation bug the PA-RISC CRYPTO_memcmp function is
effectively reduced to only comparing the least significant bit of each
byte. This allows an attacker to forge messages that would be considered as
authenticated in an amount of tries lower than that guaranteed by the
security claims of the scheme. The module can only be compiled by the HP-UX
assembler, so that only HP-UX PA-RISC targets are affected.
rsaz_1024_mul_avx2 overflow bug on x86_64 (CVE-2017-3738)
This issue has been reported in a previous OpenSSL security advisory and a
fix was provided for OpenSSL 1.0.2. Due to the low severity no fix was
released at that time for OpenSSL 1.1.0. The fix is now available in
OpenSSL 1.1.0h.
There is an overflow bug in the AVX2 Montgomery multiplication procedure
used in exponentiation with 1024-bit moduli. No EC algorithms are affected.
Analysis suggests that attacks against RSA and DSA as a result of this
defect would be very difficult to perform and are not believed likely.
Attacks against DH1024 are considered just feasible, because most of the
work necessary to deduce information about a private key may be performed
offline. The amount of resources required for such an attack would be
significant. However, for an attack on TLS to be meaningful, the server
would have to share the DH1024 private key among multiple clients, which is
no longer an option since CVE-2016-0701.
This only affects processors that support the AVX2 but not ADX extensions
like Intel Haswell (4th generation).
For more details, see https://www.openssl.org/news/secadv/20180327.txt
The copyright year changed in LICENSE, so adjust the hash to match.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following CVEs:
bn_sqrx8x_internal carry bug on x86_64 (CVE-2017-3736)
Malformed X.509 IPAddressFamily could cause OOB read (CVE-2017-3735)
Release notes: https://www.openssl.org/news/secadv/20171102.txt
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
To ease the transition to having both OpenSSL and LibreSSL, there has to be
a new virtual package introduced to handle both.
Instead of making a libssl, and adding OpenSSL and libressl to that package,
it will be far easier to move openssl to libopenssl and to make OpenSSL
a virtual package. This offers a few advantages:
- BR2_PACKAGE_OPENSSL is still a visible symbol with no dependencies.
- It does not require a huge patch to convert every instance of
OpenSSL -> libssl)
- Users will be able to update without ever having to select anything new.
- LibreSSL can be added at a later date to the virtual package.
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
[Thomas: define BR2_PACKAGE_PROVIDES_HOST_OPENSSL to the value
"host-libopenssl" as we always want to use the original OpenSSL for
the host variant.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>