[Peter: AUTORECONF and --with-keysymdef no longer needed]
Signed-off-by: Allan W. Nielsen <a@awn.dk>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
As stated in commit 555c2585bf, the
Xtensa architecture has been introduced in 2009 and never changed
since its initial introduction. It requires some special handling that
is a bit annoying, and despite our call to the initial developers, and
the announcement of the deprecation of the architecture during the
2012.05, nothing has happened. Therefore, drop support for this
architecture.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: me
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Some parts of alsa-lib correctly use threads only when available, but
some other parts, especially certain PCM plugins, unconditionally
require threads. While it would certainly be possible to fix alsa-lib
to only use threads when available, it probably doesn't make much
sense, since on an embedded system that has audio, we are probably
powerful enough to enable thread support in the C library.
Fixes:
http://autobuild.buildroot.org/results/e14469be7f6171f4c8c0c09c8e32943819f7938b/build-end.log
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Instead of duplicating the "depends on BR2_PACKAGE_ALSA_LIB", just put
BR2_PACKAGE_ALSA_LIB_PYTHON under the existing condition "if
BR2_PACKAGE_ALSA_LIB".
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
In its Config.in, pulseaudio declares a dependency on gettext
using the documented construct:
select BR2_PACKAGE_GETTEXT if BR2_NEEDS_GETTEXT
but in its .mk file, declares a dependency on the package:
PULSEAUDIO_DEPENDENCIES = [...] $(if $(BR2_PACKAGE_GETTEXT),gettext) [...]
instead of the documented:
$(if $(BR2_NEEDS_GETTEXT),gettext)
Fix that.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
CC: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
lshw.mk defines a build-dependency on gettext,
but not in its Config.in.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
CC: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[yann.morin.1998@free.fr: add license info, build libintl if locales disabled]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
CC: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
From now on, packages only need to select the BR2_PACKAGE_GETTEXT
option and depend on the 'gettext' package to get the necessary i18n
libraries installed on the target.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[yann.morin.1998@free.fr: remove BR2_PACKAGE_LIBINTL]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
CC: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Now, the gettext package always:
* install everything to the staging directory
* install the libraries to the target directory
Note that this commit removes BR2_PACKAGE_LIBINTL without updating the
packages, it is done in a separate commit to ease the review process.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[yann.morin.1998@free.fr: keep BR2_PACKAGE_LIBINTL as blind option]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
CC: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The VGA16 dumping feature probably doesn't make much sense on anything
else than x86 and x86-64, as it is accessing I/O ports that seem
PC-specific.
Moreover, some architectures such as SH4, do not have an
implementation of outw() in uClibc, but we quite certainly don't care
about VGA16 support for such architectures.
Fixes:
http://autobuild.buildroot.org/results/e1c860830dd585830cf5ca5f935b81856e992334/build-end.log
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Bump dhcp to version 4.1-ESV-R7 to fix CVE-2012-3955
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The mplayer configure script says that sh4a is not supported,
according to:
http://autobuild.buildroot.org/results/c6457c2dea7c1df4d8e0f23995ebfb3285a85aed/build-end.log
Apparently, sh4 is supported, but not sh4a, even though it seems that
sh4a is a super-set of sh4. So it would probably not be too difficult
to get mplayer to build/work for sh4a, but we don't have hardware to
test this easily, and we can leave this work to the first developer
who will need mplayer on sh4a: let's only support what the upstream
package supports.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
On gcc10, the build of the host-vala documentation causes a
segmentation fault of xsltproc, for some unknown reason. See:
http://autobuild.buildroot.org/results/42fea25ac4fe33a56c02d90c361da1c494f79ba3/build-end.log
Therefore, this patch fixes the problem by:
* Ensuring that host-libxslt is amongst the dependency of vala when
documentation is enabled so that we build a well-known version of
libxslt/xsltproc to build the documentation. If documentation is
not enabled, then we force vala to *not* find xsltproc so that it
doesn't try to use the xsltproc of the build machine distribution
if available.
* Disabling the build of the documentation for host-vala. Note that
we need to pass ':' as the xsltproc binary name to teach the
configure script that xsltproc is not available.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This reverts commit 32f4957b15.
Adding the phony objdir target as a prerequisite of all the .o targets
doesn't work, as they are then always considered out of date, leading
to poco getting rebuilt (without the proper MYSQL_{INC,LIB}DIR settings)
at staging-install / target-install time.
Instead simply use MAKE1 for the build step.
Fixes http://autobuild.buildroot.net/results/1cca8b4115674f12884bcbc0c680efed0fb939ae
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Add the new filesystem utilities category and move a bunch of packages
into it.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
v2 - license type is GPLv2/BSD-3c as pointed out by Baruch Siach
Signed-off-by: Mark Jackson <mpfj@newflow.co.uk>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
[Peter: license is explictly GPLv2, not GPLv2+]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
opus + jpegformat plugin builds fail when gstreamer is configured with
--disable-gst-debug as they are checking the GST_DISABLE_DEBUG symbol
instead of GST_DISABLE_GST_DEBUG.
Submitted upstream as https://bugzilla.gnome.org/show_bug.cgi?id=683850
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Fixes http://autobuild.buildroot.net/results/8a9369fece696e012249b865708ffee533c5318a
Pppd bundles some, but not all needed kernel headers. In Linux 3.5 (and
before that 2.6.35) if_pppol2tp.h was changed, so the embedded copy was no
longer compatible.
if_pppol2tp.h has been part of the exported kernel headers since 2.6.23, so
simply drop the bundled copy and use the kernel headers instead, similar
to how it is done in Gentoo:
https://bugs.gentoo.org/show_bug.cgi?id=427684
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This update pulls in new ath6k and realtek drivers and updates for
libertas and iwlwifi:
a707c25 Merge branch 'master' of git://dev.laptop.org/users/dsd/linux-firmware
adb6547 rtlwifi/rtl8723e: Add firmware for new driver
4e17394 linux-firmware: ath6k: add firmware for AR6004 hw1.3
bac3567 Marvell SD8787: update to v14.66.9.p96
6a08d14 Marvell SD8686: update to v9.70.20.p0
bbede96 iwlwifi: update firmware for 6205
Signed-off-by: Sven Neumann <s.neumann@raumfeld.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This change is to fix the autobuild failure at:
http://autobuild.buildroot.net/results/45e2c08d5e3c868b2d7fdf26a7c5f88de5ff8f61/build-end.log
I can't actually reproduce this bug, because my machine cannot
run the 64-bit microblaze toolchain. However, the log makes
it clear that -fPIC is needed, and grepping for fPIC and fpic
under packages makes it clear that cjson should have used -fPIC
anyway. So even if the bug isn't fixed, it must surely be improved.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Note that the COPYING.LESSER file states that "Parts of the
software are licensed under the MIT (X11) license".
On the 0MQ mailing list, Pieter Hintjens has confirmed that
the code no longer contains any parts that are under the
MIT/X11 license. (The COPYING.LESSER file will be fixed in
a future release.)
Signed-off-by: Simon Dawson <simond@trainfx.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
With the replacement of GENTARGETS by package-generic, there is a risk
that local packages don't work anymore without any indication of what
is wrong. Therefore, generate an error message if the GENTARGETS,
AUTOTARGETS or CMAKETARGETS macro is still used.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
-mno-abicalls is an old kludge for some (probably) old issue.
Remove it since it's actually harmful, static busybox doesn't build with
it for a modern-ish toolchain (defaults as of this commit, uClibc
0.9.33.2 + gcc 4.5.4).
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Practically speaking, MIPS has three useful ABIs:
* o32 is for 32-bits CPUs, or 64-bit CPUs running only a 32-bit subset
of the instruction set.
* n32 is for 64-bits CPUs only. It has 32-bits pointers and long
integers.
* n64 is for 64-bits CPUs only. It has 64-bits pointers and long
integers.
See http://www.linux-mips.org/wiki/MIPS_ABI_History and
http://www.linux-mips.org/wiki/WhatsWrongWithO32N32N64 for more
details.
So, this commit reworks the Buildroot MIPS support by:
* Add separate mips64/mips64el top-level architectures.
* Renaming the n32 ABI option to BR2_MIPS_NABI32, for consistency
with BR2_MIPS_OABI32.
* Renaming the n64 ABI option to BR2_MIPS_NABI64, for consistency
with BR2_MIPS_OABI32.
* Make the n32 and n64 ABI selections select the BR2_ARCH_IS_64,
since those ABIs are valid on 64-bits CPUs only.
* Removing the o64 ABI, which is practicaly never used.
* Removing the "none" ABI, which really doesn't make sense.
* Introduce the mips64 and mips64el architecture names when a 64-bits
MIPS ABI is choosen. This will fix build issue like
http://autobuild.buildroot.org/results/9b8c5ea86c953a89e85e7b67e9221de41773f652/build-end.log
where gmp was confused by the fact of having a 32 bits architecture
(detected by the mips- architecture part of the tuple) but 64 bits
integer size when compiling.
* Adjust the uclibc.mk logic to support the new mips64/mips64el
architecture names, and take into account the renaming of the ABI
options.
This has been build tested by generating Buildroot toolchains and
compiling a few packages for MIPS o32, MIPS n32 and MIPS n64.
This work is originally based on prior work done by Gustavo Zacarias.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Fixes warning: (BR2_PACKAGE_COLLECTD_RRDTOOL) selects BR2_PACKAGE_RRDTOOL
which has unmet direct dependencies (BR2_USE_WCHAR).
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
mtdev2tuio is a simple application for converting touch events
to the standart TUIO 1.1 protocol.
https://github.com/olivopaolo/mtdev2tuio
[thomas.petazzoni@free-electrons.com: use TARGET_CONFIGURE_OPTS, fix
indentation, add dependency on thread support in toolchain]
Signed-off-by: Stephan Hoffmann <sho@relinux.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
liblo is an implementation of the Open Sound Control protocol
for POSIX systems.
http://liblo.sourceforge.net/
[thomas.petazzoni@free-electrons.com: add dependency on thread support
in toolchain]
Signed-off-by: Stephan Hoffmann <sho@relinux.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The mtdev is a stand-alone library which transforms all variants
of kernel multitouch events to the slotted type B protocol.
http://bitmath.org/code/mtdev/
Signed-off-by: Stephan Hoffmann <sho@relinux.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now that all packages have been converted to use the
downloads.sourceforge.net URLs that automatically selects an available
Sourceforge mirror, we can get rid of the BR2_SOURCEFORGE_MIRROR
configuration variable.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The default <foo>_SITE value that pkg-generic sets when the .mk file
doesn't declare it is using BR2_SOURCEFORGE_MIRROR and therefore isn't
consistent with the usage of downloads.sourceforge.net we have
generalized for all drivers.
Since the downloads.sourceforge.net URLs are inherently specific to
each package, we can no longer provide a default in pkg-generic.mk,
and therefore each package *must* declare its own <foo>_SITE value.
This patch fixes the only two packages that were lacking a <foo>_SITE
value.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The luajit amalgamation compile starts with building a host tool, and then
uses it to build itself. Â However, when CFLAGS is specified, as opposed to
TARGET_CFLAGS, then it is used for both HOST and TARGET builds. Â So if you
add something target specific into 'Target Optimizations' (for example,
'-mfpu=neon -mfloat-abi=softfp' for ARM Cortex-A8), then it gets into the
host tool compile, which then fails (because my build machine is not an
ARM Cortext-A8). Â This can be fixed by using TARGET_CFLAGS and
TARGET_LDFLAGS, instead of CFLAGS and LDFLAGS, respectively.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
ifplugd refuses to configure without this set.
Signed-off-by: Shawn J. Goff <shawnjgoff@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Some packages use pkg-config to check for libnss.
Add our own .pc file (vampirised from Debian).
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Some packages use pkg-config to check for libnspr.
Add our own .pc file (vampirised from Debian).
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
No specific GPL version is declared, so it defaults to "any version
ever published", as clause 9 of the GPLv2 states.
Fixes a05a1cc16b.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Update to version 1.1 (r34994).
remove --enable-largefiles configure option which was
deleted in r33321.
Discard mplayer-theora-fix.patch which is a backport
of r34498 and r34503.
Signed-off-by: Kelvin Cheung <keguang.zhang@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
create mode 100644 package/libglib2/libglib2-make-codegen-python2-python3-compliant.patch
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add license info and the smbta-util config knob.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
