This commit fixes the warnings reported by check-package on the help
text of all package Config.in files, related to the formatting of the
help text: should start with a tab, then 2 spaces, then at most 62
characters.
The vast majority of warnings fixed were caused by too long lines. A
few warnings were related to spaces being used instead of a tab to
indent the help text.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- dropping BR2_PACKAGE_GETTEXT selection
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
madplay use a libtool script in version 1.5.2 but the libtool patch
"buildroot-libtool-v1.5.patch.patch" doesn't apply.
From [1]:
"It's libtool dropping -static. That's because madplay has a
weird version of libtool, on which our libtool patch doesn't apply so
we have MADPLAY_LIBTOOL_PATCH = NO. Therefore, the hack we have that
makes libtool -static behave like -all-static isn't applied, causing
this build failure."
Fixes:
http://autobuild.buildroot.net/results/60def1b15ea61d3cb5f50e9de3f354dd2e17d270
[1] http://lists.busybox.net/pipermail/buildroot/2017-May/192959.html
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We want to use SPDX identifier for license strings as much as possible.
SPDX short identifier for GPLv2/GPLv2+ is GPL-2.0/GPL-2.0+.
This change is done by using following command.
find . -name "*.mk" | xargs sed -ri '/LICENSE( )?[\+:]?=/s/\<GPLv2\>/GPL-2.0/g'
Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The patches for uClibc-ng are upstream and added to buildroot.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
A recent change in uClibc-ng removed the MADV_* definitions for
madvise(), but kept the madvise() function itself. This defeats the
logic used in madplay: it checks if madvise() is available, and if it
is, uses it and assumes the MADV_* definitions exist.
This inconsistency has been reported to upstream uClibc-ng, but in the
mean time, we can simply tell madplay to not use madvise(), which is
anyway useless on noMMU platforms.
Fixes:
http://autobuild.buildroot.net/results/3291554ea013e5f4a8f3447e10e664dffa8b131b/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This reverts commit a0a244d26d.
As this is now handled globally in TARGET_CONFIGURE_ARGS, this can be
reverted here.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
http://autobuild.buildroot.net/results/256/2561190b274d71666c4bdf3c569b02063cefdb30/http://autobuild.buildroot.net/results/14e/14e6addcd3ec35f882da7ec489caa9b60ecd4b63/http://autobuild.buildroot.net/results/cf0/cf011286be839674d358a8bccaf1c5c52de75e46/
madplay needs gettext when built with nls, and it support 3 variants:
- C library support gettext (E.G. glibc)
- Libintl (E.G. uClibc)
- An included libintl copy
The included libintl copy has unfortunately bitrotted and doesn't even build
any more. With that said, musl DOES have gettext support, so that should be
used instead.
The configure script unfortunately uses an old AM_GNU_GETTEXT test, which
explicitly checks for nonstandard glibc extensions, which musl doesn't
support:
http://www.openwall.com/lists/musl/2015/04/16/3
Which causes the detection to fail:
configure:24770: checking for GNU gettext in libc
configure:24794: /home/peko/source/buildroot/output/host/usr/bin/i486-linux-musl-gcc \
-o conftest -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 \
-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5
/tmp/ccboDFhK.o: In function `main':
conftest.c:(.text+0x39): undefined reference to `_nl_msg_cat_cntr'
conftest.c:(.text+0x40): undefined reference to `_nl_domain_bindings'
collect2: error: ld returned 1 exit status
Now, madplay itself doesn't actually use these glibc extensions, so just force the
detection of GNU gettext when musl is used.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
It is often difficult to know exactly when make will expand the
variable, and usually it can only be expanded after the dependencies
have been built (e.g. pkg-config or the .pc file). Using a backtick
instead makes it very clear that it will be expanded only while
executing the command.
This change is useful for two cases:
1. The per-package staging (and host) directory will be created as part
of the configure step, so any $(shell ...) variable that is used in
the configure step will fail because the directory doesn't exist
yet.
2. 'make printvars' evaluates the variables it prints. It will therefore
trigger a lot of errors from missing .pc files and others. The
backticks, on the other hand, are not expanded, so with this change
the output of 'make printvars' becomes clean again.
This commit contains only the easy changes: replace $(shell ...) with
`...`, and also replace ' with " where needed. Follow-up commits will
tackle the more complicated cases that need additional explanation.
After this change, the following instances of $(shell ...) will remain:
- All assignments that use :=
- All variables that are used in make conditionals (which don't expand
the backticks).
- All variables that only refer to system executables and make
variables that don't change.
- The calls to check-host-* in dependencies.mk, because it is eval'ed.
[Original patch by Fabio Porcedda, but extended quite a bit by Arnout.]
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Autogenerated from rename-patch.py (http://patchwork.ozlabs.org/patch/403345)
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since SourceForge sometimes serves us faulty tarballs, we can tons of
autobuild failures:
http://autobuild.buildroot.org/results/9fb/9fba5bf086a4e7a29e5f7156ec43847db7aacfc4/http://autobuild.buildroot.org/results/6c8/6c837b244c45ac3b3a887734a371cd6d226cf216/
...
Fix that by adding hash files for all SourceForge-hosted packages (thos
etht did not already have it).
We normally prefer to use hashes published by upstream, but hunting them
all one by one is a tedious task, so those hashes were all locally
computed with a script that searched for SF-hosted packages, downloades
the associated tarball, computed the hash, and stored it in the
corresponding .hash file.
Also, SF publishes sha1 hashes, while I used the stronger sha256, since
sha1 is now considered to be relatively weak.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Cc: Richard Braun <rbraun@sceen.net>
Cc: Nathaniel Roach <nroach44@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
To be consistent with the recent change of FOO_MAKE_OPT into FOO_MAKE_OPTS,
make the same change for FOO_CONF_OPT.
Sed command used:
find * -type f | xargs sed -i 's#_CONF_OPT\>#&S#g'
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Otherwise build fails in intl/relocatable.c with:
./relocatable.c: In function 'libintl_relocate':
./relocatable.c:402:40: error: 'INSTALLPREFIX' undeclared (first use in this function)
./relocatable.c:402:40: note: each undeclared identifier is reported only once for each function it appears in
[Peter: drop redundant 'else' part]
Signed-off-by: Julien Boibessot <julien.boibessot@armadeus.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In the Config.in file of package foo, it often happens that there are other
symbols besides BR2_PACKAGE_FOO. Typically, these symbols only make sense
when foo itself is enabled. There are two ways to express this: with
depends on BR2_PACKAGE_FOO
in each extra symbol, or with
if BR2_PACKAGE_FOO
...
endif
around the entire set of extra symbols.
The if/endif approach avoids the repetition of 'depends on' statements on
multiple symbols, so this is clearly preferred. But even when there is only
one extra symbol, if/endif is a more logical choice:
- it is future-proof for when extra symbols are added
- it allows to have just one strategy instead of two (less confusion)
This patch modifies the Config.in files accordingly.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Jerzy Grzegorek <jerzy.grzegorek@trzebnica.net>
Acked-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com)
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Unless it was a group of sub-packages, packages was never regrouped by
category. multimedia/ was an exception to this rule.
This patch move packages/multimedia/ sub-directories to packages/. It
keeps two subdirectories for gstream 0.10 and gstreamer 1.X.
Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
