Don't list specific dtb files, instead install all dtb files in the same
way as dtbo files are currently done.
Signed-off-by: Martin Bark <martin@barkynet.com>
[Thomas: use make foreach loop instead of shell for loop.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This commit fixes the warnings reported by check-package on the help
text of all package Config.in files, related to the formatting of the
help text: should start with a tab, then 2 spaces, then at most 62
characters.
The vast majority of warnings fixed were caused by too long lines. A
few warnings were related to spaces being used instead of a tab to
indent the help text.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The vcdbg utility is linked to a few libraries, which so far were all
provided by the rpi-userland package.
But a not-so-recent bump of rpi-firmware pulled in a vcdbg that is
linked to an additional library, which is not privided by rpi-userland,
so we must install it.
Reported-by: cluelessperson on #buildroot
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The main reason why vcdbg is only available on ARM is the fact that this is
a prebuilt ARM binary rather than the rpi-userland dependency, so adjust the
comment to clarify.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, vcdbg is only supported in 32-bit mode. Furthermore, vcdbg
needs rpi-userland, which we currently only support in 32-bit mode.
Add a dependency on BR2_arm.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The check-package script when ran gives warnings on ordering issues
on all of these Config files. This patch cleans up all warnings
related to the ordering in the Config files for packages starting with
the letter r in the package directory.
The appropriate ordering is: type, default, depends on, select, help
See http://nightly.buildroot.org/#_config_files for more information.
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The RaspberryPi 3 is based on a AArch64 CPU and requires binaries from
this package.
Signed-off-by: Gaël PORTAY <gael.portay@savoirfairelinux.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We want to use SPDX identifier for license string as much as possible.
SPDX short identifier for BSD-3c is BSD-3-Clause.
This change is done using following command.
find . -name "*.mk" | xargs sed -ri '/LICENSE( )?[\+:]?=/s/BSD-3c/BSD-3-Clause/g'
Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This kernel marking script is no longer used.
Remove build for host as well, since it's only use was to install mkknlimg.
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Following the removal of eglibc support, this commit replaces all
occurences of "(e)glibc" by just "glibc". Most of the occurences are in
package Config.in comments.
In addition, when the form "an (e)glibc ..." was used, it is replaced by
"a glibc ...".
[Peter: add new efi* packages, s/uclibc/uClibc as suggested by Romain,
systemd / liquid-dsp tweaks as suggested by Yann]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Although the current version of rpi-firmware we use is working just fine
on the rpi-zero, the latest firmware provides a DTB overlay to use the
USB OTG device in either host or slave modes.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit dc7b1c0 (rpi-firmware: bump version) bumped rpi-firmware to a version
based on kernel 4.4.x, but didn't update the overlay logic to handle the
.dtbo files from dynamic device tree support.
For details, see:
https://www.raspberrypi.org/forums/viewtopic.php?f=107&t=139732
[Peter: extend description]
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit bumps the rpi-firmware to a more recent version that
includes support for the Raspberry Pi 3.
Signed-off-by: Ubaldo Porcheddu <ubaldo@eja.it>
[Thomas: tweak commit log.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The current Buildroot defconfigs for Raspberry Pi and Raspberry Pi 2
instantiate a console on tty1, which appears on HDMI. Add a console on
the serial port (ttyAMA0) to be more consistent with other defconfigs
and provide a better out-of-the-box experience to users used to have a
serial console from Buildroot defconfigs.
This requires three changes:
1. have two 'console=' entries in the kernel command line: tty1,
then ttyAMA0;
2. change BR2_TARGET_GENERIC_GETTY_PORT to "console", so it starts
a getty on the last console= passed to the kernel, ttyAMA0;
3. add a new getty on tty1 to the generated inittab.
Step 2 is actually obtained by removing BR2_TARGET_GENERIC_GETTY_PORT
entirely from the defconfigs, since "console" is the default value.
Step 3 requires a post-build script since the Buildroot makefiles can
configure only one console.
Note: instead of simply adding a new getty on ttyAMA0 (which would
work) this patch actually changes BR2_TARGET_GENERIC_GETTY_PORT to
instantiate a console on UART, then adds back tty1 via
post-build.sh. This is done only to avoid the "GENERIC_SERIAL" comment
where we instantiate an HDMI console, then instantiate a really-serial
console on another line.
The result is these two inittab lines:
console::respawn:/sbin/getty -L console 0 vt100 # GENERIC_SERIAL
tty1::respawn:/sbin/getty -L tty1 0 vt100 # HDMI console
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit d16b32a401 (package/rpi-firmware: add option to install vcdbg) added
a sub option to install the vcdbg tool, but the commit unfortunately
contained two errors:
- The package sets _INSTALL_TARGET = NO, so the _TARGET_CMDS are never used
- The install command used -d (handle arguments as directories) instead of
-D (create needed directories)
Fix these issues.
Cc: yann.morin.1998@free.fr
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
To match the previous kernel version bump.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This will give us a shorter URL, that we can more easily refer to in the
documetation itself, in help texts, on IRC...
[Peter: Use buildroot.org everywhere]
Suggested-by: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Changes since last version:
- add support for lz4-compressed kernels,
- add copyright and license banners,
- enable warnings and fix a few uses of undefined variables,
- update from the rpi-4.0.y kernel.
Signed-off-by: Benoît Thébaudeau <benoit@wsystem.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
vcdbg is a tool to help debug the communication with the GPU.
It comes as a binary-only, and in two flavours: one for the hard
floating point ABI, one for the software floating point ABI.
Unfortunately, we have no source code for that tool, only a binary that
was dynamically linked with glibc and libraries from rpi-userland.
So, just install that executable, and let's hope there is no symbol
issue at runtime.
Note: vcdbg needs glibc, threads and !static. Since glibc already
implies threads and !static, we only need to depend on glibc.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc; Floris Bos <bos@je-eigen-domein.nl>
Cc: Pascal de Bruijn <pmjdebruijn@pcode.nl>
Cc: Baruch Siach <baruch@tkos.co.il>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, Buildroot does not support building the overlays that are
bundled in the Linux kernel, so all we can do is install the ones
pre-built in rpi-firmware.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Floris Bos <bos@je-eigen-domein.nl>
Cc: Pascal de Bruijn <pmjdebruijn@pcode.nl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The binary .dtb files are not suitable for everyone as they are
kernel-version specific.
Reintroduce BR2_PACKAGE_RPI_FIRMWARE_INSTALL_DTBS option.
Signed-off-by: Floris Bos <bos@je-eigen-domein.nl>
[yann.morin.1998@free.fr: don't install DTBs if kernel builds
its own; fix default; rephrase help text]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Pascal de Bruijn <pmjdebruijn@pcode.nl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Remove low-level settings from config.txt like arm_freq and sdram_freq.
The defaults should be good for most and differ by Pi model.
E.g. the Pi 2 runs at 900 Mhz by default, setting arm_freq=700
like we had previously would underclock it.
Add short description in comments to options.
Mention initramfs option.
Remove obsolete options from cmdline.txt
Signed-off-by: Floris Bos <bos@je-eigen-domein.nl>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The rpi-firmware we currently package has a fiscious bug, that happens
in corner cases while reading config.txt (mostly seen on RPi-2, but may
also occur on RPi-1).
Both the DT-aware and DT-unaware branches are affected.
Bump to the latest rpi-firmware to fix that.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Misc fixes and improvements for: DT; hdmi and EDID; video decoding,
latency and cropping; voltage calculations...
Also: support for RPi-2. :-)
Also remove the workaround previously required when installing DTBs, ad
they are now in the same branch as the latest firmware.
Signed-off-by: James Hebden <james@hebden.net.au>
Signed-off-by: "Guillermo A. Amaral" <g@maral.me>
[yann.morin.1998@free.fr: further bump, fix and trim commit log]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add an option to install all the DTBs:
- standard DTBs for standalon A/B and A+/B+ models;
- overlay DTBs for the 'hats' addon boards.
Install the DTBs as per the traditional layout expected by all RPi
users, that is:
- base DTBs alongside the other boot files;
- overlay DTBs in a sub-directory.
This requires the user provide a specially configured Linux defconfig
file, as the default ones do not enable USE_OF.
[Thomas: adjust comment explaining why we use a different version when
installing the DTBs is selected.]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The Raspberry Pi can boot a kernel with device tree support. But at the
same time, the RPi folks wante to keep the old-fashioned, ATAG-based way
of booting (don't ask...).
So, the bootloader needs to know whether the kernel it is loading has DT
support or not. For that, it looks at the end of the kernel image for a
magic footer. If found, it loads a device tree and sets the registers
appropriately so that the kernel finds the DTB. If not found, it loads
the kernel with the traditional ATAGS.
Where it becomes a bit tricky, is that the DTB is different for models
A/B and A+/B+ (that is A and B use the same DTB, while the A+ and B+ use
a second DTB). The bootloader is capable to load the correct DTB from a
specially named file. That is:
- on A/B, it loads bcm2708-rpi-b.dtb
- on A+/B+, it loads bcm2708-rpi-b-plus.dtb
If the DTB is differently named, the bootloader won't find it, will not
load any DTB at all, and revert to booting with ATAGS.
It is possible to specify what DTB to load, by adding an new config
option 'device_tree=file.dtb' in config.txt, but then the firmware on
the SDcard is no longer bootable on both the original models and the
Plus models.
So, add a script that appends the appropriate footer to the kernel
image. The script is vampirised from the RPi's tools repository, but a
new package is *not* added just for that script: the whole repository is
300+ MiB, and a checkout is 600+ MiB; it is not pertinent to add this as
a new package for a script that weights a few KiB...
Install that script as a host utility, too.
Notes: lots of information is available in this thread on the RPi forums:
http://www.raspberrypi.org/forums/viewtopic.php?f=29&t=93015
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The rpi-firmware only installs images files, so it should use
_INSTALL_IMAGES_CMDS and not _INSTALL_TARGET_CMDS.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Too many changes to list, but lots of fixes and enhancements all over
the place...
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This version bump, amongst other things, introduces
OMX_ImageFilterDeInterlaceFast, which is needed by
the upcoming xbmc/kodi version bump.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Yet another bump for the Raspberry Pi firmware:
- HDMI: EDID override; HDCP fix; add command to control power to HDMI phy;
fixes to mode selection
- GPU: enable use of HW cursor; fix for GLES FFT compliance; fix scaling;
remove arbitrary restrictions on output sizes
- video-decode: better handle corrupted h264 streams, better allocate memory
- misc: choose composite video when HDMI is not plugged
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Undocumented changes (probably related to HDMI).
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>