Bump ATF, U-Boot and Linux kernel to the NXP BSP 5.10.y_1.0.0 versions.
Signed-off-by: Stephane Viau <stephane.viau@oss.nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump ATF, U-Boot and Linux kernel to the NXP BSP 5.4.70_2.3.0 versions.
Note for configs/freescale_imx8mmevk:
On 5.4.70_2.3.0 the default "i.MX8MM LPDDR4 EVK RevB board" support is
removed and replaced by "i.MX8MM LPDDR4 EVK with QCA WIFI revB board".
In case an older revB board is used, then the following step in U-Boot is
needed:
=> setenv fdt_file imx8mm-evk-revb-qca-wifi.dtb
=> saveenv
=> reset
Build- and run-tested on:
o i.MX8MN DDR4 EVK
o i.MX8MQ EVK
Build-tested only for other configs.
Signed-off-by: Stephane Viau <stephane.viau@oss.nxp.com>
Tested-by: Stephane Viau <stephane.viau@oss.nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Stephane Viau <stephane.viau@oss.nxp.com>
[Build- and run-tested on i.MX8MN DDR4 EVK]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When using the imx8 NXP kernel, it is preferred to use the imx_v8_defconfig
instead of the generic arm64 defconfig, as the NXP defconfig selects more
imx8 specific drivers.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The DDR FW along with all other FW code that need to be used in
bootloader or installed on target are related to the firmware-imx
package.
This patch does this job as well as fixing the conjugation of NEED*s*
in the symbol name. Also take advantage of this patch to make the DDR
FW dependant on BR2_PACKAGE_FIRMWARE_IMX.
In addition, the BR2_PACKAGE_FIRMWARE_DDRFW_* option was incorrect, as
there is no package matching this name. So we rename them to
BR2_PACKAGE_FIRMWARE_IMX_*, and add the appropriate Config.in.legacy
handling.
Suggested-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Stephane Viau <stephane.viau@oss.nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch adds support for the i.MX8M Nano EVK Board [1].
The final boot image is created from uboot and firmware binaries in post
image script board/freescale/common/imx/imx8-bootloader-prepare.sh
Note that this config is based on 4.19.35_1.1.0 ; hence, the kernel
configuration needs host-openssl to build.
[1] https://www.nxp.com/design/development-boards/i-mx-evaluation-and-development-boards/evaluation-kit-for-the-i-mx-8m-nano-applications-processor:8MNANOD4-EVK
Signed-off-by: Stephane Viau <stephane.viau@oss.nxp.com>
Reviewed-by: Maeva Manuel <maeva.manuel@oss.nxp.com>
Reviewed-by: Julien Olivain <julien.olivain@oss.nxp.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
