Verified that LINUX_VERSION_PROBED is only used in "-quoted commands
(actually, usually it's not quoted).
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Remove the perf package and add legacy handling.
[Thomas:
- improve the Config.in.legacy help text
- improve the comment explaining why we pass O= when building perf]
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch is based on the patch send by James Knight:
http://lists.busybox.net/pipermail/buildroot/2015-May/128754.html
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Cc: James Knight <james.knight@rockwellcollins.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit add an infrastructure to build linux kernel
tools available in the kernel sources.
Currently, the only linux kernel tool packaged in Buildroot
is perf and it's packaged as a separate generic package.
This is a problem for licence information raised in this
thread [1].
Since these tools require to build a Linux kernel, we can
use some hooks in linux package like we did for linux
extensions [2] and remove the perf package.
[1] http://lists.busybox.net/pipermail/buildroot/2015-May/128783.html
[2] http://lists.busybox.net/pipermail/buildroot/2015-March/121835.html
[Thomas: fix minor typos in comments.]
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
If we check that the user provides a config file after we call to the
kconfig-package infra, the error message we get is the one for the
kconfig-package infra, not the custom error message we want to show to
the user.
So, only call kconfig-package after we do the check. Move the check with
the existing checks for the DTS, for consistency.
[Thomas: put the checks together, but right before the kconfig-package
call, rather than in the middle of the code, were the DTS related
tests were located.]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, this is triggering the error message:
make randconfig
make source
Limit the checks that enforce a DTS is set and at most one DTB is
appended to when we are actually building, like is done for the
configuration-file variables.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The ktap package requires some parts of the kernel tracing
infrastructure to be enabled, especially
CONFIG_EVENT_TRACING. However, this option is a blind option in the
kernel, so enabling it in linux.mk has no effect: we need to enable a
non-blind option that selects CONFIG_EVENT_TRACING. We've chosen to
select CONFIG_ENABLE_DEFAULT_TRACERS.
This fixes the build of ktap.
[Thomas: use CONFIG_ENABLE_DEFAULT_TRACERS as suggested by Arnout.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This one is a bit tricky, as the version can come from the linux-headers
package, so we must also account for that.
We currently have no hash file for linux, but better do the change now,
which allows us to later add a hash file.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Reviewed-by: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Instead of manually testing MAKECMDGOALS, use the newly introduced
BR_BUILDING variable to know if we're building or not.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
This commit removes BR2_LINUX_KERNEL_EXT_RTAI_PATCH because this
option never worked. It was added in commit
8797a9cd1f, which added package/rtai/
and RTAI as a Linux extension.
The option prompt says "Path for RTAI patch file", so let's say you
specify /home/foo/bar/myrtai.patch as the value for
BR2_LINUX_KERNEL_EXT_RTAI_PATCH.
Then the code does:
RTAI_PATCH = $(call qstrip,$(BR2_LINUX_KERNEL_EXT_RTAI_PATCH))
and we have a package called 'rtai', so the normal logic of
<pkg>_PATCH applies. Since the <pkg>_PATCH value does not contain
ftp://, http:// or https://, the package infrastructure will try to
download $(RTAI_SITE)/$(RTAI_PATCH), i.e:
https://www.rtai.org/userfiles/downloads/RTAI/home/foo/bar/myrtai.patch
Pretty clear that it has no chance of working.
Now, let's assume an URL is used as the value of
BR2_LINUX_KERNEL_EXT_RTAI_PATCH, such as
http://foo.com/bar/myrtai.patch. In this case, it will be properly
downloaded by the package infrastructure. But then, the following code
kicks in:
define RTAI_PREPARE_KERNEL
$(APPLY_PATCHES) \
$(LINUX_DIR) \
$(dir $(RTAI_PATCH)) \
$(notdir $(RTAI_PATCH))
endef
The value of $(dir $(RTAI_PATCH)) will be http://foo.com/bar/. How
can $(APPLY_PATCHES) make use of such a stupid patch location?
[Thomas: add Config.in.legacy handling, as suggested by Arnout, even
if we believe that no-one could have ever used this option.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
linux has uImage generation support for powerpc64 as well as powerpc,
since 2.6.15.
Signed-off-by: Erico Nunes <erico.nunes@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes fbtft kernel extension bug reported by Richard Fergusson ([1]):
drivers/video/Kconfig:2525: can't open file
"drivers/video/fbdev/fbtft/Kconfig"
Fix: write the right fbtft/KConfig path to video/Kconfig or
video/fbdev/Kconfig (instead of hard coded one)
[1] http://lists.busybox.net/pipermail/buildroot/2015-January/117057.html
Reported-by: Richard Fergusson <fergie4000@gmail.com>
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Curently, all three linux extensions follow the same layout:
- test if the extension is enabled
- add itself to linux' patch-dependencies
- declare a macro, added as the pre-patch hook
Except for the macro, all can be commonalised.
Add a simple infrastructure for that:
- extensions declare themselves in the list of extensions
- extensions define their macro
- the infra adds them to the patch-dependencies and pre-patch
hooks as appropriate
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since the move to the kconfig-package infra, linux extensions are
broken.
In our linux package, extensions are applied as pre-patch hooks.
Before the kconfig-package infra, we had custom rules for the
linux-*config targets, which were of the form:
linux-menuconfig: linux-configure
$(MAKE) -C $(LINUX_DIR) menuconfig
This caused the linux tree to be fully configured before running the
configurators, and thus linux dependencies were entirely fullfilled, and
extensions were properly applied.
Since we migrated (in dff25ea), the kconfig-package infra introduces a
(hidden, internal) intermediate step 'kconfig-fixup' and decorelates the
kconfig-part of the configuration from the actual package-part of the
configuration:
linux-configure -------> kconfig-fixup --> .config --> $(LINUX_CONFIG_FILE)
/
linux-menuconfig --'
As thus, this (very useful!) use-case breaks (starting from a clean
Buildroot tree):
make menuconfig
-> enable a kernel and at least one extension
-> save and exit
make linux-menuconfig
-> extensions are not available
Fix that by using the newly-introduced patch-dependencies, so that
extensions are available before we try to patch the linux kernel.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: fix issues noticed by Arnout:
- Rewrap the linux/Config.in paragraph
- Revert the "is a toolchain dependency" -> "has a toolchain
dependency" change from pkg-generic.mk, as the original was
correct.]
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Several packages have some logic to apply custom patches that existed
before the BR2_GLOBAL_PATCH_DIR mechanism: at91bootstrap,
at91bootstrap3, barebox, uboot and linux. Currently, the logic of
those packages to apply custom patches is to match
<package-name>-*.patch, which is not consistent with what we've done
for patches stored in the package directory, and for patches stored in
BR2_GLOBAL_PATCH_DIR: in such cases, we simply apply *.patch.
Therefore, for consistency reasons, this commit changes these packages
to also apply *.patch.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
This commit doesn't touch infra packages.
Signed-off-by: Jerzy Grzegorek <jerzy.grzegorek@trzebnica.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The linux package has a special handling of patches, with quite a bit
of legacy in it. A problem caused by this special handling is that the
linux package calls directly the DOWNLOAD_WGET macro, which means that
the package infrastructure isn't aware of which patches get
downloaded, and it prevents doing changes inside the package download
infrastructure.
This commit changes the handling of patches in the linux package in
the following way:
* The LINUX_PATCHES variable is kept as is: it lists all the patches
mentioned in the Config.in option BR2_LINUX_KERNEL_PATCH. This
option can contain http://, ftp://, https:// URLs, path to local
files or local directories.
This variable is *not* used by the generic package infrastructure,
so it is purely internal to the Linux package.
* The LINUX_PATCH variable is now filled in with the list of patches
that should be downloaded. It is derived from LINUX_PATCHES by
filtering the patches that have http://, ftp:// or https:// in
their path. Since <pkg>_PATCH is handled by the package
infrastructure, it means that those patches are now automatically
downloaded and applied by the package infrastructure.
* The LINUX_APPLY_PATCHES hook is renamed to
LINUX_APPLY_LOCAL_PATCHES, because it is now only responsible of
applying local patches: remote patches are handled by
LINUX_PATCH. The implementation of the hook is changed to filter
out the patches that have already taken care of by LINUX_PATCH, so
that we only iterate through the list of local patches or local
patch directories.
[Thomas: adjust comment in the code according to Yann comments.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Romain Naour <romain.naour@openwide.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reword the help text and get ride of the supported kernel
version list which is outdated since Xenomai version bump.
[Thomas: rewrap text to the appropriate length, fix some typos.]
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
If you have several linux patches directories, Buildroot does not stop
if one patches of the first directories don't apply. This patch fixes
this.
Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The recommended form is without the trailing slash. Buildroot will add a slash
between FOO_SITE and FOO_SOURCE as appropriate.
Reported-by: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE can either be a complete
.config file or a defconfig file, it can be confusing to the user
whether to choose BR2_LINUX_KERNEL_USE_DEFCONFIG or
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG.
To avoid that confusion, clarify Kconfig entry messages for in-tree
defconfig and custom (def)config files.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When building device tree blobs from custom *.dts files, buildroot
initializes KERNEL_DTS_NAME variable from all given file names.
This causes that user can't provide one *.dts file and some other
*.dtsi files as dependencies.
Problem is fixed by adding filter for initializing KERNEL_DTS_NAME
variable with *.dts files only. All user provided files are copied
into kernel source tree, but only file names suffixed with *.dts
are used for building appropriate *.dtb files.
[Thomas: add comment into the code to explain why we are filtering
.dts files only.]
Signed-off-by: Ivo Slanina <ivo.slanina@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When Buildroot is configured to append the root filesystem to the Linux
kernel as initramfs, Buildroot sets the path to the initramfs source
dynamically in the Linux configuration file.
As this path is specified as an absolute path, typically being different
for different users of the same project (e.g. containing a username),
saving the configuration to a version control system (for example using
'make linux-update-defconfig') would result in a difference for this
path at every invocation by a different user.
Although this is technically not an issue, it is confusing that this
generates a difference.
Address this issue by using a not-yet-expanded make variable to specify
the path to the initramfs source. That variable will be expanded by the
Linux build system, which uses it both as a Makefile variable and a
shell variable; thus, it needs to be specified in LINUX_MAKE_ENV (so
it is exported and available in sub-processes of make). Any saved
configuration file would simply contain the reference to the
not-yet-expanded variable.
As in the Linux build system, the config variables are both read from
make as from a shell script, we cannot use $() syntax as this would be
interpreted as a command invocation by the shell. Instead, use ${}
syntax which is interpreted as variable reference both by the shell as
by make.
[Thomas:
- Really make the patch work by using $(LINUX_MAKE_ENV) instead of
$(TARGET_MAKE_ENV). Otherwise, the new BR2_BINARIES_DIR variable is
not passed at all stages of the build process, which makes the
build fail when an initramfs is used.]
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: "Yann E. Morin" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Migrate the linux package to the kconfig infrastructure.
A notable change compared to the original behavior:
- the targets linux-update-(def)config are now always saving the config
file, even for a defconfig bundled in the linux sources. This is done
to keep the kconfig infrastructure simple.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: "Yann E. Morin" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Even though this is not strictly necessary with the current version of
linux.mk, it becomes necessary when migrating linux.mk to the kconfig
infrastructure.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: "Yann E. Morin" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The help text for Linux option 'Custom tarball' only refers to ftp or
http tarballs, while in reality file or scp protocols are also
supported.
Triggered by a recent support question, update the help text to clarify
this.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
