Since the bump to 1.5.3, pkgconf prepends the sysroot to all absolute
paths found in the .pc file. This is correct when the paths refer to
something in STAGING_DIR (e.g. libdir, includedir), but not when it
refers to something used for the target.
bluez5_utils uses the sysconfdir variable from dbus-1.pc to decide where
to install things. Since DESTDIR is prepended to the install
destination, this will end up in the wrong location.
Until a better solution is found in pkgconf, pass the sysconfdir to use
explicitly instead of relying on dbus-1.pc.
Fixes:
- http://autobuild.buildroot.org/results/498e7e368fbb3d69c2f311e3e5bc213e507b8023
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since bluez5_utils and bluez5_utils-headers would install the same set
of files (headers), we want to ensure the former is run after the
latter.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Grzegorz Blach <grzegorz@blach.pl>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Header files from bluez utils version 5.x.
Separated headers are required to break circular dependencies
when python3 is built with bluetooth support.
This is a blind option, it will be automatically selected by python3
when bluez5_utils is enabled.
Signed-off-by: Grzegorz Blach <grzegorz@blach.pl>
[Arnout: add comment to keep versions in sync; make it a blind option]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The bluez5_utils Config.in options had a bogus prefix:
BR2_PACKAGE_BLUEZ5 instead of the expected
BR2_PACKAGE_BLUEZ5_UTILS. This commit fixes that, and adds the
appropriate Config.in.legacy handling.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since bluez5_utils 5.49, some code using readline was compiled even if
readline was not available. After this issue was reported upstream, a
patch was proposed by an upstream developer to address the issue. This
commit integrates this patch (under review upstream), which fixes the
problem.
Fixes:
http://autobuild.buildroot.net/results/3e266a79acab8b8eb33360f7afbc1cd6db46f7cb/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Drop musl patch, which is not necessary anymore as netinet vs linux
header clash is fixed.
Also add hash for the license files.
musl build successfully tested with:
* armv7-eabihf--musl--stable-2017.05-toolchains-1-1
(GCC 5.4.0, Linux headers 3.10.105, musl 1.1.16)
* armv7-eabihf--musl--bleeding-edge-2018.02-1
(GCC 7.3.0, Linux headers 4.9.80, musl 1.1.18)
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The link in /etc/systemd/system/, named dbus-org.bluez.service, pointing to
../../../../usr/lib/systemd/system/bluetooth.service has one too many ".." in
it. Likely the target was copied from the other link in
/etc/systemd/system/bluetooth.target.wants/, which is one level deeper.
Adjust link to be correct.
Signed-off-by: Trent Piepho <tpiepho@impinj.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The tool hciattach_bcm43xx defines the default firmware path in `/etc/firmware`,
but the Broadcom firmware blobs are usually stored in `/lib/firmware`.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes CVE-2017-1000250 - All versions of the SDP server in BlueZ 5.46 and
earlier are vulnerable to an information disclosure vulnerability which
allows remote attackers to obtain sensitive information from the bluetoothd
process memory. This vulnerability lies in the processing of SDP search
attribute requests.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The check-package script when ran gives warnings on text wrapping
on all of these Config files. This patch cleans up all warnings
related to the text wrapping for the Config files starting with
the letter b in the package directory.
The appropriate indentation is: <tab><2 spaces><62 chars>
See http://nightly.buildroot.org/#writing-rules-config-in for more
information.
Signed-off-by: Adam Duskett <aduskett@codeblue.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Package can now be used for uClibc toolchains.
Tested using this defconfig:
BR2_TOOLCHAIN_BUILDROOT_WCHAR=y
BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV=y
BR2_PACKAGE_BLUEZ5_UTILS=y
BR2_PACKAGE_BLUEZ5_UTILS_CLIENT=y
BR2_PACKAGE_BLUEZ5_UTILS_DEPRECATED=y
BR2_PACKAGE_BLUEZ5_UTILS_EXPERIMENTAL=y
BR2_PACKAGE_BLUEZ5_PLUGINS_HEALTH=y
BR2_PACKAGE_BLUEZ5_PLUGINS_MIDI=y
BR2_PACKAGE_BLUEZ5_PLUGINS_NFC=y
BR2_PACKAGE_BLUEZ5_PLUGINS_SAP=y
BR2_PACKAGE_BLUEZ5_PLUGINS_SIXAXIS=y
BR2_PACKAGE_BLUEZ5_UTILS_TEST=y
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The midi profile was introduced in BlueZ 5.44.
Cc: Marcin Bis <marcin@bis.org.pl>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Disregard to increase just minor version BlueZ 5.44 is drastically different in
a way what plugins that used to be enabled by the --enable-experimental
configure option, now have their own option.
Extend Buildroot package to cover these plugins.
Cc: Marcin Bis <marcin@bis.org.pl>
Cc: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In BlueZ 5.44 the --enable-experimental configure option only controls the
build of the Nokia OBEX PC Suite plugin. Correct the option prompt and help
text.
Cc: Marcin Bis <marcin@bis.org.pl>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The check-package script when ran gives warnings on ordering issues
on all of these Config files. This patch cleans up all warnings
related to the ordering in the Config files for packages starting with
the letter b in the package directory.
The appropriate ordering is: type, default, depends on, select, help
See http://nightly.buildroot.org/#_config_files for more information.
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The check-package script when ran gave warnings on only using
one space before backslashes on all of these makefiles.
This patch cleans up all warnings related to the one space before
backslashes rule in the make files in the package directory.
Signed-off-by: Adam Duskett <aduskett@codeblue.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We want to use SPDX identifier for license string as much as possible.
SPDX short identifier for LGPLv2.1/LGPLv2.1+ is LGPL-2.1/LGPL-2.1+.
This change is done using following command.
find . -name "*.mk" | xargs sed -ri '/LICENSE( )?[\+:]?=/s/LGPLv2.1(\+)?/LGPL-2.1\1/g'
Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We want to use SPDX identifier for license strings as much as possible.
SPDX short identifier for GPLv2/GPLv2+ is GPL-2.0/GPL-2.0+.
This change is done by using following command.
find . -name "*.mk" | xargs sed -ri '/LICENSE( )?[\+:]?=/s/\<GPLv2\>/GPL-2.0/g'
Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Whitespaces were searched using the following regex:
[ ]{1,}\t
and then manually removed in most of the cases. For
xserver_xorg-server.mk, tabs before backslashes were removed.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit d732fa4 add the BLUEZ5_UTILS_INSTALL_INIT_SYSTEMD rule, however,
it is not correct. The [Install] section of bluetooth.service is as
follows:
[Install]
WantedBy=bluetooth.target
Alias=dbus-org.bluez.service
hence there are currently two mistakes:
1) bluetooth.service is wanted by bluetooth.target not multi-user.target
2) dbus-org.bluez.service is a missing alias to bluetooth.service
This commit fixes both these issues.
Signed-off-by: Martin Bark <martin@barkynet.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch has been accepted upstream and requires no changes to apply
to 5.37.
Fixes:
http://autobuild.buildroot.org/results/2bf4e5ea9b67b80ba38bfeaf71b747a92be09011/
Signed-off-by: John Keeping <john@metanate.com>
[Thomas:
- add reference to upstream commit
- add John's SoB to the patch itself
- add reference to autobuilder failure.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since the bump from 5.27 to 5.37 of bluez5_utils, the bluez code has
started using <wordexp.h> functionality. Unfortunately, our current
uClibc configuration does not have the wordexp functionality enabled,
so bluez5_utils cannot be built anymore.
In order to address this, we make bluez5_utils unavailable on
uClibc. This could be changed later by either removing the dependency
of bluez5_utils on wordexp support, or by deciding to add wordexp
support to our uClibc configuration.
Fixes:
http://autobuild.buildroot.org/results/831/83112559d84dc156141339a31e3e02f1a2af5155/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Project moved to github according to http://sourceforge.net/projects/freeassociation
"As of 2014-06-14, this project may now be found at http://github.com/libical."
[Thomas: propagate the C++ dependency to bluez5_utils OBEX support,
which selects libical.]
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now that IPv6 is mandatory remove package dependencies and conditionals
for it.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As suggested by bluez5_utils upstream developers, use an improved
version of the mcaptest patch that only conditionally links on librt
instead of unconditionally linking against it (glibc after 2.17 have
clock_getres() in libc and not in librt).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since a while, the semantic of BR2_PREFER_STATIC_LIB has been changed
from "prefer static libraries when possible" to "use only static
libraries". The former semantic didn't make much sense, since the user
had absolutely no control/idea of which package would use static
libraries, and which packages would not. Therefore, for quite some
time, we have been starting to enforce that BR2_PREFER_STATIC_LIB
should really build everything with static libraries.
As a consequence, this patch renames BR2_PREFER_STATIC_LIB to
BR2_STATIC_LIBS, and adjust the Config.in option accordingly.
This also helps preparing the addition of other options to select
shared, shared+static or just static.
Note that we have verified that this commit can be reproduced by
simply doing a global rename of BR2_PREFER_STATIC_LIB to
BR2_STATIC_LIBS plus adding BR2_PREFER_STATIC_LIB to Config.in.legacy.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
