The test doesn't make sense. It just exits without any error if the
binary doesn't exist, which is silly.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The basic lvm2 package (libdevmapper / dmsetup) does build under musl, only the
standard (full) installation doesn't.
Many setups only need the basic package, so move the !musl dependencies down
to the sub options and adjust the reverse dependencies (cryptsetup/dmraid)
to match.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Thomas: adjust Config.in comments and dependencies.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The check-package script when ran gives warnings on text wrapping
on all of these Config files. This patch cleans up all warnings
related to the text wrapping for the Config files starting with
the letter d in the package directory.
The appropriate indentation is: <tab><2 spaces><62 chars>
See http://nightly.buildroot.org/#writing-rules-config-in for more
information.
Signed-off-by: Adam Duskett <aduskett@codeblue.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This reverts commit 66f136a9f6.
Issue fixed with uClibc-ng update to 1.0.24.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We want to use SPDX identifier for license strings as much as possible.
SPDX short identifier for GPLv2/GPLv2+ is GPL-2.0/GPL-2.0+.
This change is done by using following command.
find . -name "*.mk" | xargs sed -ri '/LICENSE( )?[\+:]?=/s/\<GPLv2\>/GPL-2.0/g'
Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The _gp link issue has been fixed in CS nios2 2015.11.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
See the conclusion about external toolchains during the Buildroot
meeting [1]:
"In the future, we stick to a single external toolchain version. The
Kconfig symbol should not encode the version (avoid legacy handling)"
[1] http://elinux.org/index.php?title=Buildroot:DeveloperDaysELCE2015#Report
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Reviewed-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Tested-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes:
http://autobuild.buildroot.net/results/a7e2631d06634d768faf5c1d02712cc9b38562c6/
Investigation of nios2 config.log shows that this is caused by the
"infamous" _gp link issue on codesourcery toolchains:
configure:9118: /ssd1/thomas/autobuild/instance-0/output/host/usr/bin/nios2-linux-gnu-gcc -o conftest -O2 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c -ldevmapper-event >&5
/ssd1/thomas/autobuild/instance-0/output/host/opt/ext-toolchain/bin/../lib/gcc/nios2-linux-gnu/4.8.3/../../../../nios2-linux-gnu/bin/ld: /ssd1/thomas/autobuild/instance-0/output/host/usr/nios2-buildroot-linux-gnu/sysroot/usr/lib/crt1.o: undefined reference to symbol '_gp'
/ssd1/thomas/autobuild/instance-0/output/host/usr/nios2-buildroot-linux-gnu/sysroot/usr/lib/libdevmapper.so.1.02: error adding symbols: DSO missing from command line
collect2: error: ld returned 1 exit status
As with other cases, fixed by disabling this package when codesourcery
toolchains are in use.
Signed-off-by: Brendan Heading <brendanheading@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now that largefile is mandatory removes package dependencies and
conditionals.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since a while, the semantic of BR2_PREFER_STATIC_LIB has been changed
from "prefer static libraries when possible" to "use only static
libraries". The former semantic didn't make much sense, since the user
had absolutely no control/idea of which package would use static
libraries, and which packages would not. Therefore, for quite some
time, we have been starting to enforce that BR2_PREFER_STATIC_LIB
should really build everything with static libraries.
As a consequence, this patch renames BR2_PREFER_STATIC_LIB to
BR2_STATIC_LIBS, and adjust the Config.in option accordingly.
This also helps preparing the addition of other options to select
shared, shared+static or just static.
Note that we have verified that this commit can be reproduced by
simply doing a global rename of BR2_PREFER_STATIC_LIB to
BR2_STATIC_LIBS plus adding BR2_PREFER_STATIC_LIB to Config.in.legacy.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
As discussed, users should use a rootfs overlay or a post-build script
instead of a custom skeleton to override files installed by Buildroot,
so there is no point in having conditions when installing init scripts
or configuration files.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
To be consistent with the recent change of FOO_MAKE_OPT into FOO_MAKE_OPTS,
make the same change for FOO_INSTALL_TARGET_OPT.
Sed command used:
find * -type f | xargs sed -i 's#_INSTALL_TARGET_OPT\>#&S#g'
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit fixes the init script to use the correct
FOO_INSTALL_INIT_SYSV hook.
[Thomas: slightly reword commit log.]
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
dmraid rc15 does not support later Intel Software RAID (isw) chipsets
correctly. Updating dmraid to a later edition fixes this issue.
Also cleanup and remove now useless patches.
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Cc: Antony Vennard <arv@vx9.co.uk>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This reverts commit 262a4c0bf7.
Compiler error has been fixed, and building this package doesn't cause an
ICE anymore.
Signed-off-by: Anton Kolesov <anton.kolesov@synopsys.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The ARC compiler has an internal failure while compiling this package
so disable this package for this architecture.
Fixes:
http://autobuild.buildroot.net/results/ef6/ef6a0e2d382ae202bb8f0e9fc9f5e48c90119faf
[Peter: add comment explaining why]
Signed-off-by: Ryan Barnett <rjbarnet@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When a package A depends on config option B and toolchain option C, then
the comment that is given when C is not fulfilled should also depend on B.
For example:
config BR2_PACKAGE_A
depends on BR2_B
depends on BR2_LARGEFILE
depends on BR2_WCHAR
comment "A needs a toolchain w/ largefile, wchar"
depends on !BR2_LARGEFILE || !BR2_WCHAR
This comment should actually be:
comment "A needs a toolchain w/ largefile, wchar"
depends on BR2_B
depends on !BR2_LARGEFILE || !BR2_WCHAR
or if possible (typically when B is a package config option declared in that
same Config.in file):
if BR2_B
comment "A needs a toolchain w/ largefile, wchar"
depends on !BR2_LARGEFILE || !BR2_WCHAR
[other config options depending on B]
endif
Otherwise, the comment would be visible even though the other dependencies
are not met.
This patch adds such missing dependencies, and changes existing such
dependencies from
depends on BR2_BASE_DEP && !BR2_TOOLCHAIN_USES_GLIBC
to
depends on BR2_BASE_DEP
depends on !BR2_TOOLCHAIN_USES_GLIBC
so that (positive) base dependencies are separate from the (negative)
toolchain dependencies. This strategy makes it easier to write such comments
(because one can simply copy the base dependency from the actual package
config option), but also avoids complex and long boolean expressions.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(untested)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch lines up the comments in Config.in files that clarify which
toolchain options the package depends on.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Finally get rid of all := used for variable definitions in packages,
as we suggest in our manual and during the review of new packages.
While I was at it, I also sometimes added a few missing new lines
between the header and the first variable definition.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Thanks to the pkgparentdir and pkgname functions, we can rewrite the
AUTOTARGETS macro in a way that avoids the need for each package to
repeat its name and the directory in which it is present.
[Peter: pkgdir->pkgparentdir]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
These are probaly out of date by now, and lack of special handling for
avr32 doesn't mean that a package won't work on avr32, so remove them.
Done by sed -i '/comment.*no inherent support for AVR32/{N;N;p}'
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Fix install into staging (YES instead of yes), fix uninstall target,
use default target-install handling, install headers/lib/man pages into
target if requested.
A small patch is needed for 'make remove' to work.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Init scripts are only run if they are prefixed with S??, and dmraid gets
installed into /usr/sbin, not /sbin.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
For the target installation step, do not rely on the package being
installed in the staging directory, as it may not be true. So the
dmraid binary is directly taken from the build directory.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As device-mapper has moved to lvm2, dmraid must now require lvm2.
Signed-off-by: Nigel Kukard <nkukard@lbsd.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
dmraid is hard coded with -L$(DESTDIR)$(libdir) which tries to link in
the host systems' libs
Signed-off-by: Nigel Kukard <nkukard@lbsd.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
