We want to use SPDX identifier for license string as much as possible.
SPDX short identifier for LGPLv2/LGPLv2+ is LGPL-2.0/LGPL-2.0+.
This change is done using following command.
find . -name "*.mk" | xargs sed -ri '/LICENSE( )?[\+:]?=/s/LGPLv2(\+)?/LGPL-2.0\1/g'
Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We want to use SPDX identifier for license strings as much as possible.
SPDX short identifier for GPLv2/GPLv2+ is GPL-2.0/GPL-2.0+.
This change is done by using following command.
find . -name "*.mk" | xargs sed -ri '/LICENSE( )?[\+:]?=/s/\<GPLv2\>/GPL-2.0/g'
Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
And remove patches already included in this release.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Jann Horn, Project Zero (Google) discovered that ntfs-3g, a read-write
NTFS driver for FUSE does not not scrub the environment before
executing modprobe to load the fuse module. This influence the behavior
of modprobe (MODPROBE_OPTIONS environment variable, --config and
--dirname options) potentially allowing for local root privilege
escalation if ntfs-3g is installed setuid.
Notice that Buildroot does NOT install netfs-3g setuid root, but custom
permission tables might be used, causing it to vulnerable to the above.
ntfs-3g does not seem to have a publicly available version control system
and no new releases have been made, so instead grab the patch from Debian.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch is based on a patch sent by Vicente Olivert Riera and commented by
Arnout Vandecappelle [1].
- Bump version to 1.23
- Add a hook to fix cross-compilation
- Fix license and license files
- Remove patch applied upstream
- Add a BR2_PACKAGE_LIBGPG_ERROR_ARCH_SUPPORTS variable
- Propagate the dependencies using that variable:
* package/cppcms
* package/crda
* package/gnupg2
- package/gcr
- package/midori
* package/kodi
* package/libaacs
* package/libassuan
* package/libgcrypt
* package/libgpgme
* package/libksba
* package/libmicrohttpd
- package/janus-gateway
- package/kodi
- package/ola
- package/systemd
* package/libssh
* package/libssh2
- package/php-ssh2
* package/netatalk
* package/network-manager
* package/ntfs-3g
* package/opkg
* package/php-gnupg
* package/rng-tools
* package/strongswan
* package/vpnc
[1] http://patchwork.ozlabs.org/patch/416427/
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
[Thomas:
- rebase on master
- changing systemd no longer needed, as it no longer selects
libgcrypt.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Maxime:
- rebase on master
- bump to new version
- propagate dependencies to missing packages]
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
[Thomas:
- fix hash file.
- change the way to handle the various arch so that it works properly
for uClibc.
- add nios2 arch support.
- Maxime Hadjinlian learned some basic Emacs-fu to do the final fixups
of this commit.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The comment for ntfs-3g displays even when the package has met its
necessary dependencies.
Signed-off-by: Ryan Barnett <ryan.barnett@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now that largefile is mandatory removes package dependencies and
conditionals.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit doesn't touch infra packages.
Signed-off-by: Jerzy Grzegorek <jerzy.grzegorek@trzebnica.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
To be consistent with the recent change of FOO_MAKE_OPT into FOO_MAKE_OPTS,
make the same change for FOO_CONF_OPT.
Sed command used:
find * -type f | xargs sed -i 's#_CONF_OPT\>#&S#g'
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When a package A depends on config option B and toolchain option C, then
the comment that is given when C is not fulfilled should also depend on B.
For example:
config BR2_PACKAGE_A
depends on BR2_B
depends on BR2_LARGEFILE
depends on BR2_WCHAR
comment "A needs a toolchain w/ largefile, wchar"
depends on !BR2_LARGEFILE || !BR2_WCHAR
This comment should actually be:
comment "A needs a toolchain w/ largefile, wchar"
depends on BR2_B
depends on !BR2_LARGEFILE || !BR2_WCHAR
or if possible (typically when B is a package config option declared in that
same Config.in file):
if BR2_B
comment "A needs a toolchain w/ largefile, wchar"
depends on !BR2_LARGEFILE || !BR2_WCHAR
[other config options depending on B]
endif
Otherwise, the comment would be visible even though the other dependencies
are not met.
This patch adds such missing dependencies, and changes existing such
dependencies from
depends on BR2_BASE_DEP && !BR2_TOOLCHAIN_USES_GLIBC
to
depends on BR2_BASE_DEP
depends on !BR2_TOOLCHAIN_USES_GLIBC
so that (positive) base dependencies are separate from the (negative)
toolchain dependencies. This strategy makes it easier to write such comments
(because one can simply copy the base dependency from the actual package
config option), but also avoids complex and long boolean expressions.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(untested)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch lines up the comments in Config.in files that clarify which
toolchain options the package depends on.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The internal libfuse-lite implementation uses it, and since the external
full-blown libfuse also requires it there's no other choice.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Now that we've moved to gnutls 3.x which no longer uses libgcrypt we
need to pull it in as a dependency for ntfs-3g encrypted volume support
to avoid build breakage.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
ntfsprogs is now included into ntfs-3g so add an option to
enable/disable it.
It probably doesn't make sense to build ntfsprogs alone so it's not
implemented.
Add the encrypted volume support option now that we've got gnutls.
Also add support for libuuid if it's present.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Thanks to the pkgparentdir and pkgname functions, we can rewrite the
AUTOTARGETS macro in a way that avoids the need for each package to
repeat its name and the directory in which it is present.
[Peter: pkgdir->pkgparentdir]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
--program-prefix is now set in the auto-target infrastructure.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
These are probaly out of date by now, and lack of special handling for
avr32 doesn't mean that a package won't work on avr32, so remove them.
Done by sed -i '/comment.*no inherent support for AVR32/{N;N;p}'
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
- bump version to 2009.03.8
- internal fuse support, no longer depends on libfuse/pkgconfig
- fix WCHAR dependency
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The host versions shouldn't be visible in Kconfig, so remove the
reference to BR2_PACKAGE_PKGCONFIG everywhere and prefix the host targets
with host-.
At the same time add pkgconfig for the target (E.G. for development) and
let BR2_PACKAGE_PKGCONFIG control that package.
Notice: all defconfigs in the tree have been updated, but make sure to
disable the pkgconfig package (unless you want it) if you use an external
config, otherwise you'll end up with pkgconfig and glib2 in the target.
