genimage makes a full copy of the given rootpath to ${GENIMAGE_TMP}/root
so passing TARGET_DIR would be a waste of time and disk space. We don't
rely on genimage to build the rootfs image, just to insert a pre-built
one in the disk image.
Signed-off-by: Carlos Santos <unixmania@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Back a few years ago, when we were starting to think about top-level
parallel build, we were not sure how to deal with packages that
installed the same files, so we wanted to catch the situation to assess
how prevalent that was, before we decided what to do and how to address
it.
However, the trend nowadays is that packages will install in a
per-package target/ (and staging/ and host/), and the final directories
will be assembled in a reproducible (alphabetical) order, so if two
packages install the same file, the last one will win (as is currently
the case).
Besides, check-uniq-files reports loads of spurious errors when packages
get reinstalled (e.g. during development).
Finally, check-uniq-files is the only script called during the build,
that is written in python.
So, get rid of check-uniq-files.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When selected, host-ccache is a dependency of almost all packages.
As such, it clutters the dependency graph uselessly.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Reviewed-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The POSIX specification defines a 'trap <action> EXIT' mechanism that is
useful to perform clean-up actions in shell scripts. A trap has two main
advantages over hand-crafted clean-up mechanisms:
- It runs even if the process is terminated by a SIGTERM.
- It runs even if the script stops due to a pipeline failure (set -e).
Now we can make the script to stop immediately if a compilation error
occurs, instead of letting it try to run an unexisting program.
This change may appear to be overkill but Buildroot is an open source
project and each piece of code is a potential learning tool for other
developments. We must strive to provide good examples.
Signed-off-by: Carlos Santos <unixmania@gmail.com>
Acked-by: Yann E. MORIN <yann.morin@orange.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Some installations mount /tmp with the 'noexec' option, which prevents
running the program generated there to check the kernel headers.
Avoid the problem by generating the program under $(BUILD_DIR), passed
as the first argument to check-kernel-headers.sh.
We could globally export a TMPDIR environment variable with some path
under $(BUILD_DIR) but such solution would be too intrusive, depriving
the user from the freedom to set TMPDIR at his will (or needs).
Fixes: https://bugs.busybox.net/show_bug.cgi?id=12241
Signed-off-by: Carlos Santos <unixmania@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
As suggested by Baruch Siach, using "git rev-parse HEAD" is a lot
simpler than playing around with "git log" to just retrieve the commit
id corresponding to the current HEAD.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
pkg-stats extracts the Buildroot commit id from which the package
information was collected. However, when doing so, it always assumes
we're using the master branch, by running "git log master".
But in fact, pkg-stats can be run from any branch/tag, so it makes a
lot more sense to use "git log HEAD".
Cc: victor.huesca@bootlin.com
Cc: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Now that we can order packages from biggest to smallest, it makes sense
to assign the most aggressive colours to the biggest packages.
As such, reorder the current colours so that we have, in order:
- red-ish
- orange-ish
- yellow-ish
- purple-ish
- eggplant-ish (is that even a colour? :-] )
- some-indeterminate-blue-ish
- dark-green-ish
- light-green-ish
For the previous, smallest-first ordering, it does not matter much what
the ordering is: the actual colours are still somewhat-unpredictably
assigned to packages, depending on the cut-off limit...
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Currently, the packages are sorted smallest first, and biggest last
(with unknown and others second-to-last and last, resp.).
Add an option to invert the ordering (but keeping unknown and others at
their current positions).
This has the nice side effect that we can now control the colours
assigned to the biggest package(s), as the colours are cycled from the
first to the last. Currently, the biggest packages gets a redish colour,
which is appropriate, but the second gets a greenish one, which is not
as appropriate (but changing that can come later).
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
When dealing with embedded devices, storage is more often than not some
kind of flash device, on which the memory is usually counted as powers
of 1024 instead of powers of 1000. As such, people may prefer reports
using IEC prefixes [0] instead of the SI prefixes.
Add an option to that effect.
We use argparse's ability to use custom actions [1] [2], to provide a
set of options that act on a boolean, but has a single help entry and
internally ensures consistency of the settings. We could have been using
the more conventional store_true/store_false actions instead, but that
would have meant either two help entries, one for each set of options,
and/or some logic after parse_args() to check the validity of the
settings.
[0] https://en.wikipedia.org/wiki/Binary_prefix
[1] https://docs.python.org/2/library/argparse.html#action
[2] https://docs.python.org/2/library/argparse.html#argparse.Action
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Currently, we group packages that contribute less then 1%, into the
"Other" category.
However, in some cases, there can be a lot of very comparatively small
packages, and they may not exceed this limit, and so only the "Others"
category would be displayed, which is not nice.
Conversely, if there are a lot of packages, most of which only so
slightly exceeding this limit, then we get all of them in the graph,
which is not nice either.
Add a way for the developers to pass a different cut-off limit. As for
the dependency graph which has BR2_GRAPH_DEPS_OPTS, add the environment
variable BR2_GRAPH_SIZE_OPTS to carry those extra option (in preparation
for more to come, later).
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
[Arnout:
- remove empty base class definition from Config;
- use parser.error instead of ValueError for invalid argument.]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Currently, we forcibly report sizes in multiple of Kilobytes. In some
big configurations, the sizes of the system as a whole, as well as that
of individual packages, may exceed megabytes, and when some artistic
assets get used, even the gigabyte may get exceed.
These big sizes are not easy to read when expressed in kilobytes.
Additionally, some very small packages might have sizes below the
kilobyte (and when we can specify the cut-off grouping size, they may
get reported), and thus the size displayed for those would be 0 kB.
Add a helper function that can format a floating-point size into a
string with all the appropriate formatting:
- there are at least 3 meaningfull digits visible, i.e. we display
"3.14" or "10.4" instead of just "3" or "10", but for big number we
don't care about too many precision either, so we report "100" or
"1000", not "100.42" or "1000.27";
- the proper SI prefix is appended, if needed.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Currently, the "unknown" category may be reported anywhere, so it does
not really stand out when there are a lot of packages in the graph.
Move it towards the end, but right before the "other" category, so that
it is a bit more visible. Like for Others, don't report it if its size
is zero.
Also, make it title case (i.e. "Unknown" instead of "unknown").
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
It is nicer overall to have a main() function, like all our other
scripts tend to have too.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
There are three E501 warnings returned by flake8, when run locally,
because we enforce a local 80-char limit, but that are not reported by
the gitlab-ci jobs because only a 132-char limit is required there.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Reviewed-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Similar to toolchains and jpeg, we now offer a way for br2-external
trees to provide their openssl implementation, which gets included in
the openssl choice.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Vadim Kochan <vadim4j@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Similar to toolchains, we now offer a way for br2-external trees to
provide their libjpeg implementation, which gets included in the jpeg
choice.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Vadim Kochan <vadim4j@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since we have a choice for the pre-configured pre-built toolchains,
there is no possbility for a br2-external to provide its own. The
only solution so far for defconfigs in br2-external trees is to use
BR2_TOOLCHAIN_EXTERNAL_CUSTOM and define all the bits by itself...
This is not so convemient, so offer a way for br2-external trees to
provide such pre-configured toolchains.
To allow for this, we now scan each br2-external tree and look for a
specific file, provides.toolchains.in. We generate a kconfig file that
sources each such file, and that generated file is sourced from within
the toolchain choice, thus making the toolchains from a br2-external
tree possible and available in the same location as the ones known to
Buildroot:
Toolchain --->
Toolchain type (External toolchain) --->
Toolchain --->
(X) Arm ARM 2019.03
( ) Linaro ARM 2018.05
( ) Custom toolchain
*** Toolchains from my-br2-ext-tree: ***
( ) My custom ARM toolchain
*** Toolchains from another-br2-ext-tree: ***
( ) Another custom ARM toolchain
( ) A third custom ARM toolchain
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Vadim Kochan <vadim4j@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, the kconfig part contains two things: the kconfig option
with the paths to br2-external trees, and the kconfig menus for the
br2-external trees.
When we want to include more kconfig files from the br2-external tree
(e.g. to get definitions for pre-built toolchains), we will need to
have the paths defined earlier, so they can be used from the br2-external
tree to include files earlier than the existing menus.
Split the generated kconfig file in two: one to define the paths, which
gets included early in our main Config.in, and one to actually define
the existing menus, which still gets included at the same place they
currently are.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Vadim Kochan <vadim4j@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We currently redirect the output of each helper function. This was nice
as long as we were generating single .mk and .in fragments.
But we are soon to need more .in fragments.
So, do the redirection inside the .in helpers.
We do not (currently) need to generate more than one .mk fragment, but
for consistency, do the redirection in the .mk helper too.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Vadim Kochan <vadim4j@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When we introduced support for multiple br2-external trees, we
introduced two files, one on the Makefile side, needed very early,
and one on the kconfig side, needed later in the configuration
process. We naturally introduced a two-step generation, as it looked
like the simplest and most obvious way.
But now, we are on the verge of generating more files on the kconfig
side, and it does not make sense to add even more steps to generate
them.
And even better yet, we can generate both the Makefile-side and
kconfig-side files at the same time, in fact.
Make it so.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Vadim Kochan <vadim4j@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We do not usually provide help for our internal scripts. Besides, such
help has a tendency to bitrot pretty quickly anyway.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Vadim Kochan <vadim4j@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit b14b02698 (core/br2-external: restore compatibility with old
distros) switched to using 'eval' to emulate associative arrays, for
those distros too old to have bash-4+.
In so doing, it forgot to declare the new local variables in the
respective helper functions.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Vadim Kochan <vadim4j@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The major bottleneck in pkg-stats is the time spent waiting for
answers from remote servers. Two functions involve such communication
with remote servers:
- 'check_package_urls' which checks that each package upstream website
is up, it is efficient due to the use of process-pools thanks to
Matt Weber.
- 'check_package_latest_version' which fetches the latest package
version from release-monitoring, it uses a http-pool but runs
sequentially.
This patch extends the use of process-pools to 'check_latest_version'.
Due to some limitations of multiprocess callbacks, this patch loses
the overall progress of packages in favour of just the current package
name.
Runtimes for this function are ~3m vs ~25m for the linear version.
Tested on an i7 7500U (2/4 cores/threads @3.5GHz) with 15ms ping.
Note: There have already been work trying to parallelize this function
using threads but there were a failure on some configurations [1].
This implementation rely on a dedicated module already in use on this
script, so it's unlikely to see failure with this version.
[1] http://lists.busybox.net/pipermail/buildroot/2018-March/215368.html
Signed-off-by: Victor Huesca <victor.huesca@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes:
- blank space before ':'
- unused 'o' variable left from a previous patch
- bad continuous alignment
Signed-off-by: Victor Huesca <victor.huesca@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The pkg-stats calls 3 times `make` to get a bunch of variables. These
variables can be obtained in only one make invocation. This patch
replaces the three calls by just one and adjusts the parsing logic
accordingly.
Note: another option suggested by Arnout would be to run `make
show-info` that produces a json with the necessary variables. This
would avoid the duplicated effort done in pkg-stats and pkg-utils and
allow to add other infos to pkg-stats like dependencies, reversed
dependencies or if the package is virtual.
In order to use this method, the following changes are required in
pkg-generic's show-info:
- include license_files;
- have an option to run it on *all* packages, not just the selected
ones.
This patch take the simplest approach of only factorizing the make
calls as it requires less changes.
Signed-off-by: Victor Huesca <victor.huesca@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since it's used only for the HTML output, and all other functions used
for HTML output are prefixed by dump_html, let's do so for
dump_gen_info() as well by renaming it to dump_html_gen_info().
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The 'dump_html' and 'dump_json' both include commit infos as well as the
current date. It make more sense to retrieve these information once.
This patch simply does this factorization.
Signed-off-by: Victor Huesca <victor.huesca@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Pkg-stats is a great script that get a lot of interesting info from
buildroot packages. Unfortunately it is currently designed to output a
static HTML page only. While this is great to include on the
buildroot's website, the HTML is not designed to be easily parsable and
thus it is difficult to reuse it in other scripts.
This patch provide a new option to output a JSON file in addition to the
HTML one.
The old 'output' option has been renamed to 'html' to distinguish from
the new 'json' option.
Signed-off-by: Victor Huesca <victor.huesca@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Move the mutual exculsion of the '-n' and '-p' options to be part of the
parser instead of being checked in main.
Signed-off-by: Victor Huesca <victor.huesca@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
/lib/grub is already ignored, so add /usr/lib/grub to support
BR2_ROOTFS_MERGED_USR.
Signed-off-by: Alex Xu <alex_y_xu@yahoo.ca>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Currently, we extract the dependency graph from the aptly named but
ad-hoc show-dependency-graph rule.
We now have a better solution to report package information, with
show-info.
Since show-dependency-graph never went into a release so far, and
show-info does provide the same (and more), switch to using show-info.
Thanks to Adam for suggesting the coding style to have a readable code
that is not ugly but still pleases flake8. Thanks to Arnout for
suggesting the use of dict.get() to further simplify the code.
Note: we do not use the reverse_dependencies field because it only
contains those packages that have a kconfig option, so we'd miss most
host packages.
Reported-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Cc: Adam Duskett <aduskett@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Previously, the flake8 script didn't help us to detect when Python
scripts were incorrectly wrapped. Now, however, it does report such
errors.
Fix one such an error now.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
[Arnout: give commit message a more positive tone]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Now that we can get the whole dependency tree from make, use it to
speed up things considerably.
So far, we had three functions to get the dependencies information:
get_depends(), get_rdepends(), and, somehow unrelated, get_version().
Because of the way %-show-{,r}depends works, getting the dependency tree
was expensive, the three functions all took a set of packages for which
to get the dependencies, in an attempt to limit the time it took to get
that tree, but we still had to call these functions iteratively, until
they returned no new dependency. This was pretty costly.
Now, getting the tree is much, much less costly, and we can get the
whole tree as cheaply as we previously got only the first-level
dependencies.
Furthermore, we can now also get the version information at the same
time, and that also brings in whether the package is virtual or not,
target or host.
So, we drop all three helper functions, and replace them with a single
one that returns all that information in one go: full dependency trees
(direct and reverse), per-package type, and per-package version.
Note: since commit 2d29fd96a (pkg-virtual: remove VERSION/SOURCE),
virtual packages are no longer reported as having a 'virtual' version,
so have since been displayed as regular packages in the graphs. Although
noone complained, this patch incidentally restores the initial
behaviour, and virtual packages are now correctly displayed as such
again.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
We we simplify the dependency graph, we try to remove so-called
mandatory dependencies from each package, and for each mandatory that
was thus removed, reattach it to the root-package of the graph.
This was made so that mandatory dependencies (which are dependencies of
all packages, or at least of a lot of packages) do not clutter the
dependency graph, but that they are still shown in the graph, as
dependencies of the root package.
However, these mandatory dependencies are only _direct_ dependencies.
As such, it does not make sense to reattach a mandatory dependency when
doing a reverse graph. Worse, it can actually be incorrect.
For example, 'skeleton' is a mandatory dependency, and as such is
removed from all packages. But when doing a reverse graph, skeleton is
now in the dependency chain of, e.g. skeleton-init-none; it should then
not be removed.
In short: the notion of mandatory dependencies does not make sense in
the case of a reverse graph.
Consequently, skip over the mandatory dependency removal when doing a
reverse graph.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When host-gzip is needed, it is a mandatory dependency of all packages.
As such, drawing the dependency lines toward host-gzip would uselessly
clutter the graph.
So, like for the skeleton, host-skeleton, and host-tar, we cut the
dependency chains toward host-gzip.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When host-tar is needed, it is a mandatory dependency of all packages.
As such, drawing the dependency lines toward host-tar would uselessly
clutter the graph.
So, like for the skeleton and host-skeleton, we cut the dependency chains
toward host-tar.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
host-skeleton is a dependency of almost all packages, except a very few.
As such, it clutters the dependency graph uselessly.
Do with it as we do for the skeleton: cut the dependency chains.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Some times, multiple dependency graphs for a set of packages (mostly
the application-level packages for the project) are included in reports
(e.g. delivery notes). Repeating the mandatory dependencies on all
those graphs is useless and clutters the important dependencies.
When we had only two such mandatory dependencies (toolchain, skeleton),
it was manageable to list them as manual exclusions:
-x toolchain -x skeleton
But we now have quite a few such dependencies, and it becomes a bit more
cumbersome to manage, not counting the ones we may add in the future.
Add an option to exclude all those mandatory dependencies, to generate
neat graphs.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The current graph-depends implementation filters out a number of
"mandatory" dependencies that all packages have: dependency on
"toolchain" and dependency on "skeleton".
Despite this filtering, in full graph dependencies, "toolchain" and
"skeleton" are still shown, because they are target packages, and
therefore appear in the result of "make show-targets". Thanks to this,
they will be visible as dependencies of the "ALL" node, which is the
root of the dependency tree.
However, as we are going to introduce host-skeleton as a "mandatory
dependency" to be filtered out, this is no longer going to work.
This commit adjusts the remove_extra_deps() function to ensure that
when a mandatory dependency is removed, this dependency exists between
the root of the dependency tree and the mandatory dependency.
This issue was noticed by Yann E. Morin, and this commit provides a
different implementation than what Yann proposed in
https://patchwork.ozlabs.org/patch/910453/.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[yann.morin.1998@free.fr:
- list mandatory deps before removing them
- fix flake8 warnings
]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes the following flake8 warnings:
support/scripts/pkg-stats:34:2: W605 invalid escape sequence '\$'
support/scripts/pkg-stats:34:4: W605 invalid escape sequence '\('
support/scripts/pkg-stats:34:11: W605 invalid escape sequence '\$'
support/scripts/pkg-stats:34:13: W605 invalid escape sequence '\('
support/scripts/pkg-stats:34:32: W605 invalid escape sequence '\)'
support/scripts/pkg-stats:34:34: W605 invalid escape sequence '\)'
support/scripts/pkg-stats:35:2: W605 invalid escape sequence '\s'
support/scripts/pkg-stats:35:14: W605 invalid escape sequence '\S'
support/scripts/pkg-stats:35:17: W605 invalid escape sequence '\s'
support/scripts/pkg-stats:42:1: E302 expected 2 blank lines, found 1
support/scripts/pkg-stats:587:133: E501 line too long (157 > 132 characters)
Note that the "invalid escape sequence" errors work because Python
leaves the \ in place if it doesn't recognise the escape sequence. But
it's better practice to use a raw string for regular expressions.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Introduce support/scripts/check-merged-usr.sh, a script that check if a
given path complies to the merged /usr requirements:
/
/bin -> usr/bin
/lib -> usr/lib
/sbin -> usr/sbin
/usr/bin/
/usr/lib/
/usr/sbin/
Use this script in skeleton-custom.mk instead of a bunch of variables
filled by $(shell ...) macros. The same script will be used to check
rootfs overlays, in a forthcoming change.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This commit adds fetching the latest upstream version of each package
from release-monitoring.org.
The fetching process first tries to use the package mappings of the
"Buildroot" distribution [1]. This mapping mechanism allows to tell
release-monitoring.org what is the name of a package in a given
distribution/build-system. For example, the package xutil_util-macros
in Buildroot is named xorg-util-macros on release-monitoring.org. This
mapping can be seen in the section "Mappings" of
https://release-monitoring.org/project/15037/.
If there is no mapping, then it does a regular search, and within the
search results, looks for a package whose name matches the Buildroot
name.
Even though fetching from release-monitoring.org is a bit slow, using
multiprocessing.Pool has proven to not be reliable, with some requests
ending up with an exception. So we keep a serialized approach, but
with a single HTTPSConnectionPool() for all queries. Long term, we
hope to be able to use a database dump of release-monitoring.org
instead.
From an output point of view, the latest version column:
- Is green when the version in Buildroot matches the latest upstream
version
- Is orange when the latest upstream version is unknown because the
package was not found on release-monitoring.org
- Is red when the version in Buildroot doesn't match the latest
upstream version. Note that we are not doing anything smart here:
we are just testing if the strings are equal or not.
- The cell contains the link to the project on release-monitoring.org
if found.
- The cell indicates if the match was done using a distro mapping, or
through a regular search.
[1] https://release-monitoring.org/distro/Buildroot/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Tested-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Replace all YAML anchors with the new "extends" keyword because it is
more readable and more flexible (it works across configuration files
combined with the new "include" keyword).
Readability is more meaningful in .gitlab-ci.yml.in.
In the part of .gitlab-ci.yml that is auto-generated by 'make
.gitlab-ci.yml' keep the keyword in the same line of the job name.
So instead of this:
zynqmp_zcu106_defconfig:
extends: .defconfig
tests.boot.test_atf.TestATFAllwinner:
extends: .runtime_test
Use this:
zynqmp_zcu106_defconfig: { extends: .defconfig }
tests.boot.test_atf.TestATFAllwinner: { extends: .runtime_test }
Do this to to keep .gitlab-ci.yml easier to be post-processed by a
script.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
setlocalversion will use 'hg id' to determine whether or not the current
revision is tagged. If there is no tag, the Mercurial revision is printed,
otherwise nothing is printed.
The problem is that the user may have custom configuration settings (in
their ~/.hgrc file or similar) that changes the output of 'hg id' in a way
that the script does not expect. In such cases, the Mercurial revision may
not be printed or printed incorrectly.
It is good practice to ignore the user environment when calling Mercurial
commands from a well-defined script, by setting the environment variable
HGRCPATH to the empty string. See also 'hg help environment'.
In the particular case of Nokia, a custom extension adds dynamic tags in the
repository, i.e. tags that are stored in a file external to the repository
and only visible when the extension is active. These tags should not
influence the behavior of setlocalversion as they are not official Buildroot
tags, i.e. even if a revision is tagged, the Mercurial revision should still
be printed.
Note that this still does not solve the problem where an organization adds
_real_ tags in their Buildroot repository. For example, there might be a
moving tag 'last-validated' or tags indicating in which product release that
Buildroot revision was used. In these cases, setlocalversion will still not
behave as expected, i.e. show the Mercurial revision.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When Buildroot is stored in a Mercurial repository on a branch other than
'default' ('master' in git terms), setlocalversion (used to populate
/etc/os-release) will incorrectly think that this is a tagged version and
will NOT print out the revision hash.
This is due to the fact that the output of 'hg id' is assumed to be
"<revision> <tags-if-any>"
but when on a branch it actually is:
"<revision> (<branch>) <tags-if-any>"
To let setlocalversion receive the output it expects, explicitly ask 'hg id'
to retrieve only the revision hash and any tags, ommitting any branch
information.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The color for 'extract' is very similar to the one for 'install-images'.
Both are cyan-like.
Replace the former by a pale blue to make all colors sufficiently distinct.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Tested-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
As suggested by Arnout Vandecappelle, let's document the
elf_needs_rpath() and check_elf_has_rpath() functions, before we make
them a bit more complicated with per-package directory support.
Suggested-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
