The configure script contains a buggy test for the bool datatype and
it's size. This is normally not a big deal as the result isn't used
for anything, but when BR2_CONFIG_CACHE (default) is used, the
wrong ac_cv_type_bool result is stored in the cache, and other packages
like libcurl DO need the bool type, so that breaks the build.
Fix it by presetting those tests to sane values.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Make sure alsa-lib is built before gst-plugins-base if enabled, so
configure detects the presence of alsa and builds alsasink/src.
Reported-by: Phil Edworthy <Phil.Edworthy@renesas.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
gettext needs WCHAR support in the toolchain, and as libglib2 depends on
gettext and lots of stuff depends on libglib2, quite a lot of packages
needs to have their dependencies adjusted.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Gstreamer has complicated dependencies (because of glib2), so use
depends on rather than select, similar to how it is done for gtk2.
At the same time default gtk/gstreamer support to Y if those are
available, as they are likely wanted.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
libgtk2 can either use the X11 or directfb backend, depending on what
is selected - But if other packages 'select' libgtk2 there is no
guarantee that any backends are enabled, breaking the build.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Closes#1819
Fix two issues with pciutils:
- pciutils would look in /usr/share/misc for pci.ids, but install it in
/usr/share. This is because pciutils doesn't use a ./configure script,
so we have to also provide the configuration (make) arguments when
we run make install as well. Fix it by making it look into /usr/share
as that's simpler to do, and is what upstream does.
- the update-pciids script would call wget with the --no-timestamping
option, which isn't supported by busybox wget. Fix it by simply
removing that option as it isn't really critical.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Fix two issues with the icu build:
- icu source contains an #elif without any arguments, which g++ >= 4.4
flags as an error. This is both an issue for target and host build,
so restructure the .mk so any *both*patch is applied to both builds
(the other patches would cause trouble with host builds)
- icu build system isn't parallel make safe, use MAKE1
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The recent change to use config.guess to figure out GNU_HOST_NAME
broken the x86x86fix detection for 32bit hosts, as config.guess
returns something like i686-pc-linux-gnu rather than something with
*-unknown-linux-* like we used to use.
Fix it by simply looking for "linux" instead.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Fixes the ULONG_MAX definition problem:
In file included from cache.c:43:
../include/netlink-local.h: In function '__str2type':../include/netlink-local.h:218: error: 'ULONG_MAX' undeclared (first use in this function)
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
netplug uses nested functions, and gcc generates a warning that
is turned into an error:
cc1: warnings being treated as errors
if_info.c: In function 'ifsm_scriptdone':
if_info.c:289: error: generating trampoline in object (requires executable stack)
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The less package already selects BR2_PACKAGE_CURSES, but it fails to
depend on it in the makefile. Therefore, there are cases where less
gets built before curses, and the build fails:
checking for working terminal libraries... Cannot find terminal libraries - configure failed
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Closes#849, #1135
customize.mk used to copy files with a wrong command, resulting in one
directory level in excess. For example, source/etc/myfile would have
produced /etc/etc/myfile in the target filesystem instead of /etc/myfile.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Closes#1525
Kconfig selects are not recursive, so ensure we select the dependencies
of our dependencies as well.
Cleanup target installation:
- Remove tasks handled by the generic post-build cleanup
- Hal doesn't install etc/rc.d, so don't try to delete it
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Fix a few typos/mistakes introduced in commit ea448fe:
- bzip2 soname is not the same as package version
- It is PKG_INSTALL_STAGING, not PKG_STAGING_INSTALL
- Typo: BZIP2_INSTALL_TARGET_CMDS, not B2IP_INSTALL_TARGET_CMDS
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Also convert to generic package infrastructure
Signed-off-by: Lionel Landwerlin <llandwerlin@gmail.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Do not build against libgcrypt on the host, since we don't build
libgcrypt ourself, and it might fail even when libgcrypt is installed
on the host:
...configure...
checking for libgcrypt-config... /usr/bin/libgcrypt-config
Crypto extensions will be available.
...build...
gcc: /usr/lib/libgcrypt.so: No such file or directory
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Closes#803
Based on initial patch by rvpaasen@t3i.nl
[Peter: lua/luac needs liblua.so.* on target]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
While at it convert spaces to TABs
Signed-off-by: Darius Augulis <augulis.darius@gmail.com>
Signed-off-by: Paulius Zaleckas <paulius.zaleckas@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Closes#1321
[Peter: Rework patch to make it apply to git]
Signed-off-by: Grant Edwards <grant.b.edwards@gmail.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Fixes error: "open with O_CREAT in second argument needs 3 arguments".
Original patch: svn://svn.berlios.de/tslib/trunk/tslib r72.
[Peter: pull original patch for proper attribution]
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Will Wagner <will_wagner@carallon.com>
Acked-by: Paulius Zaleckas <paulius.zaleckas@gmail.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
[Peter: remove select from xserver Config.in]
Signed-off-by: Will Wagner <will_wagner@carallon.com>
Acked-by: Paulius Zaleckas <paulius.zaleckas@gmail.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
[Peter: also remove selects from affected Config.in's]
Signed-off-by: Will Wagner <will_wagner@carallon.com>
Acked-by: Paulius Zaleckas <paulius.zaleckas@gmail.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Will Wagner <will_wagner@carallon.com>
Acked-by: Paulius Zaleckas <paulius.zaleckas@gmail.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Later version of xserver no longer need configure hack to say where
mesa3d is located.
Signed-off-by: Will Wagner <will_wagner@carallon.com>
Acked-by: Paulius Zaleckas <paulius.zaleckas@gmail.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Note this version requires a recent kernel with KMS support as it is
currently configured
Signed-off-by: Will Wagner <will_wagner@carallon.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The toolchains built with buildroot use specially crafted paths for their
sysroot and prefix. Fix that by asking gcc where it finds a file we
know by relative path to the sysroot.
This has the side effect of greatly simplifying the sysroot detection
in every cases tested so far (BR toolchains, CT-NG toolchains, and
CodeSourcery toolchains).
Fixes bug #851.
Thanks Thomas Petazzoni for the hint and some testings.
Thanks Grant Edwards for the report and the comments.
Signed-off-by: Yann E. MORIN <yann.morin.1998@anciens.enib.fr>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Upgrade libusb to v1.0.3 and add new libusb-compat package for
compatibility with old packages that expect the pre-1.0 API.
Also update usb_modeswitch to depend on libusb-compat rather than
libusb.
Minor fixes by Thomas Petazzoni <thomas.petazzoni@free-electrons.com>.
Fixes bug #1093.
Signed-off-by: Mike Crowe <mac@mcrowe.com>
Enable susv3/susv4 legacy support for now, as a lot of packages (E.G.
busybox) breaks with the stricter interpretation in 0.9.31.
Also slightly tweak uclibc.mk as the "new" linuxthreads symbol changed.
Test built on x86/x86-64/ppc/arm/mips.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Closes#817 + #1189
Signed-off-by: Johan Thelin <johan@thelins.se>
Signed-off-by: Grant Edwards <grant.b.edwards@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Also adds proper dependency information to stop build errors.
Signed-off-by: Paul Jones <paul@pauljones.id.au>
Acked-By: Will Wagner<willw@carallon.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Closes#1219
Signed-off-by: Will Wagner <will_wagner@carallon.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
qt 4.6.x has a number of new configure options, and needs a patch to
work on uClibc.
Signed-off-by: Frederik Vannoote <frederik.vannoote@barco.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Closes#1459
dnsmasq takes CFLAGS on make opt rather than env.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Closes#1387
The documentation step needs working groff and ps2pdf on the host, and
only slows down the build, so just disable it.
At the same time, cleanup the overlong _CONF_OPT line.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Closes#1447
When installing without symbols install-strip is used,
with symbols - install-exec.
Since install-exec installs only executables, we should use
simple install, to install other needed files also
(like files in /usr/shared) as install-strip does.
Signed-off-by: Paulius Zaleckas <paulius.zaleckas@gmail.com>
Acked-by: Lionel Landwerlin <llandwerlin@gmail.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Has been marked as broken for more than 1 year, with no indication
that anyone cares, and it needs a bunch of special handling.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Also autotools.in conversion and change source location from
gd.tuwien.ac.at to ftp.gnupg.org
[Peter: add missing libgpg-error makefile dependency]
Signed-off-by: Lionel Landwerlin <llandwerlin@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Closes#1123
[Peter: get rid of redundant DISABLE_LARGEFILE]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Closes#805
This patch updates mdadm to 2.6.9 and uses the new makefile template.
Signed-off-by: Richard van Paasen <rvpaasen@t3i.nl>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
linux/hayesesp.h got removed in 2.6.33, but some archs (like x86) still
define the TIOCGHAYESESP ioctl, breaking the build.
It's very unlikely to be of interest anymore, so just undef it.
Reported-by: Paulius Zaleckas <paulius.zaleckas@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
As the 0.9.30.x stable releases only contain bugfixes, there isn't much
sense in using the older 0.9.30.x releases instead of .3, so use a single
0.9.30.x config similar to how we do it for the kernel headers.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Reported by H Hartley Sweeten.
Make sure we pass proper CFLAGS to mtd-utils, so builds needing --sysroot
works (E.G. external toolchains).
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Reported by "Thomas".
Strip fails as it gets called without any arguments. Instead of working
around this, simply remove the package-specific stripping as it is
done later (in target-finalize) anyway.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Commit be8a104c3c (pass CFLAGS/LDFLAGS and add host-zlib dependency)
changed the way make was invocated for squashfs and added a patch for 4.0,
but forgot to add an equivalent patch for 3.4.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Closes#1183.
When gmp/mpfr is needed for the host (E.G. when using an internal toolchain),
the host-lib{gmp,mpfr}-source targets weren't added to HOST_SOURCE, so
make source / external-deps didn't handle them.
Notice that we have the same issue with the new host package support,
there we should probably use HOST_<package>_DEPENDENCIES for -source
dependencies.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Before the autotools conversion, xfont_font-util was installed in
staging, so keep this.
However, the current way of handling xfont_font-util is ugly. The
post-install.sh script removes the binaries compiled for the target
from the staging directory and replaces them by symbolic links to
utils installed on the host (making the incorrect assumption that they
are available).
It looks like xfont_font-util needs to be built for the host (using
the new infrastructure for host autotools package). This is certainly
post-2010.02 though.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Peter Korsgaard