NXP i.MX8MNano based SBC with 1GB of LPDDR4 and 16GB eMMC.
More details on the platform here:
https://boundarydevices.com/product/nitrogen8m-nano/
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Changelog:
- fix serial# variable creation for i.MX8MQ/MM/MN
- improve display selection
- fix fastboot support for boards with 1GB of RAM only
- add BD Nano board support
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Changelog:
- fix PMIC issue for i.MX8MMini
- add support for MCP25xxFD SPI to CAN chip
- fix external module build issue for GCC >= 9
- add BD Nano board support
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This defconfig supports the OLPC XO-1 platform.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump U-Boot to 2020.04 and kernel to version 5.6.3
Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump U-Boot to version 2020.04 and kernel to 5.6.3.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The support for MacchiatoBin board in U-Boot and Linux has been
significantly improved in the past years. So it no longer makes much
sense to have a separate build configuration based on older vendor
Linux kernel and U-Boot. This commit drops the configuration based on
vendor kernel and U-Boot and renames the mainline-based defconfig.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump Linux to 5.6.3, U-Boot to 2020.01. New kernel and modules based
on arm64 defconfig do not fit into default size filesystem anymore.
So increase filesystem size to 120M.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
BR2_TARGET_ROOTFS_EXT2_LABEL now defaults to "rootfs", so repeating
that in those defconfigs is no longer necessary.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add initial support for Nanopi R1 board with below features:
- U-Boot 2019.01
- Linux 5.0
- Default packages from buildroot
Configuration files taken from Armbian:
https://github.com/armbian/build/blob/master/patch
Signed-off-by: Davide Viti <zinosat@gmail.com>
[Thomas: move U-Boot config and DT to board/friendlyarm/nanopi-r1/uboot/]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This commit allow to use the post-image script previously added
for each qemu board.
Add "$(BR2_DEFCONFIG)" as post-image script argument to retried
the qemu command line.
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Bumping to kernel 5.5 add many new features compare to
the actual 5.3 used on Beelink GS1.
Which are crypto, USB3, GPU, IR, S/PDIF and RTC.
Signed-off-by: Clément Péron <peron.clem@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The U-boot patch has been upstreamed.
Bump U-boot version and drop the patch.
Signed-off-by: Clément Péron <peron.clem@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The WDT workaround patch has been upstreamed.
Bump to the new ATF version and drop the patch.
Signed-off-by: Clément Péron <peron.clem@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Select LIBV4L_UTILS so that camera capture pipelines can be
configured.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Now that MESA3D_OPENGL_EGL is not automatically selected by the mesa3d
etnaviv driver, explicitly select it in the config file.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Now that MESA3D_OPENGL_EGL is not automatically selected by the mesa3d
etnaviv driver, explicitly select it in the config file.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
With this commit we update for ARC boards Linux kernel
version to 5.6.3 and Linux headers version to 5.6.
Signed-off-by: Evgeniy Didin <didin@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: arc-buildroot@synopsys.com
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump the kernel to the 5.4.27 version.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
NXP i.MX8MMini based SBC with 2GB of LPDDR4 and 8GB eMMC.
More details on the platform here:
https://boundarydevices.com/product/nitrogen8m-mini
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This initial support includes:
Linux 5.4
U-Boot 2020.01
Arm Trusted Firmware v2.2
Buildroot default packages.
Signed-off-by: Suniel Mahesh <sunil@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Disabled creation of u-boot.imx image as it fails, and is not required.
Final boot image is created from uboot binary and firmwares in post image
script board/freescale/common/imx/imx8-bootloader-prepare.sh
With the bump of the kernel to 4.19, the kernel configuration now needs
host-openssl to build.
Tested-by: Julien Olivain <julien.olivain@oss.nxp.com>
Signed-off-by: Laurent GAUTHIER <laurent.gauthier_1@oss.nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
With the kernel to 4.19, the kernel configuration needs host-openssl
to build.
Fixes:
scripts/extract-cert.c:21:10: fatal error: openssl/bio.h: No such file or directory
21 | #include <openssl/bio.h>
Signed-off-by: Julien Olivain <julien.olivain@oss.nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
With the recent bump of the kernel to 4.19, the kernel configuration
now needs host-openssl to build.
Fixes:
scripts/extract-cert.c:21:10: fatal error: openssl/bio.h: No such file or directory
21 | #include <openssl/bio.h>
Signed-off-by: Julien Olivain <julien.olivain@oss.nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Changelog summary:
- Various fixes all over
- Updated LPDDR4 timings for i.MX8M
- Support of UUU recovery tool
- Added support for i.MX8MMini, i.MX8MNano
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The package imx-seco has been added in the defconfigs.
Signed-off-by: Maeva Manuel <maeva.manuel@oss.nxp.com>
Reviewed-by: Julien Olivain <julien.olivain@oss.nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Let's clean up "boards/stmicroelectronics" directory a bit
to have everything in particular directories.
Signed-off-by: Bartosz Bilas <b.bilas@grinn-global.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The board support package includes the following components:
- U-Boot 2020.01
- Linux 5.4.26
- Buildroot default packages
Signed-off-by: Bartosz Bilas <b.bilas@grinn-global.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
It will be useful for the upcoming introducing stm32mp157a dk2 board.
Signed-off-by: Bartosz Bilas <b.bilas@grinn-global.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Instead use generic genimage.sh script.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
optee-os needs host-python-pycrypto build for python3. The only way we can
force building host-python modules for python3 is to select python3 package
for the target.
Since we want to avoid adding more host-python3-<modules>
(host-python-pycrypto host-python-pyelftools), select python3 package
even if it's not used.
This problem will be fixed as soon as python2 is removed.
Fixes:
File "scripts/pem_to_pub_c.py", line 24, in main
from Crypto.PublicKey import RSA
ImportError: No module named 'Crypto'
https://gitlab.com/buildroot.org/buildroot/-/jobs/456818689
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Cc: Etienne Carriere <etienne.carriere@linaro.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Similar to the fix for the base beaglebone defconfig in commit 38912a61be
(configs/beaglebone: kernel builds needs host-openssl), the qt5 variant uses
the same kernel, so also needs host-openssl.
Fixes:
914 scripts/extract-cert.c:21:25: fatal error: openssl/bio.h: No such file or directory
915 #include <openssl/bio.h>
https://gitlab.com/buildroot.org/buildroot/-/jobs/451176891
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit 61a813339a (package/bluez_utils: drop package) removed
bluez-utils, but forgot to update the defconfigs. Fix them by changing to
bluez5-utils instead.
Fixes https://gitlab.com/buildroot.org/buildroot/-/jobs/451176867 and many
others.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The current Buildroot defconfigs for qemu_x86 and qemu_x86_64
instantiate a console on tty1, which appears on QEMU's
graphical window. Add a console on the serial port (ttyS0) to
be used later for gitlab testing.
This change is need since the script used for gitlab testing
needs to use a serial output with pexpect.
This change is similar to the one made for raspberrypi [1] to
handle HDMI and serial console:
This requires three changes:
1. have two 'console=' entries in the kernel command line: tty1,
then ttyS0;
2. change BR2_TARGET_GENERIC_GETTY_PORT to "console", so it starts
a getty on the last console= passed to the kernel, ttyS0;
3. add a new getty on tty1 to the generated inittab.
Step 2 is actually obtained by removing BR2_TARGET_GENERIC_GETTY_PORT
entirely from the defconfigs, since "console" is the default value.
Step 3 requires a post-build script since the Buildroot makefiles can
configure only one console.
Note: instead of simply adding a new getty on ttyS0 (which would
work) this patch actually changes BR2_TARGET_GENERIC_GETTY_PORT to
instantiate a console on UART, then adds back tty1 via
post-build.sh. This is done only to avoid the "GENERIC_SERIAL" comment
where we instantiate a console on QEMU graphical window, then
instantiate a really-serial console on another line.
The result is these two inittab lines:
console::respawn:/sbin/getty -L console 0 vt100 # GENERIC_SERIAL
tty1::respawn:/sbin/getty -L tty1 0 vt100 # QEMU graphical window
[1] 20878a1017
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The commit [1] added host-qemu package for each qemu defconfig
for gitlab runtime testing.
[1] 29e1cb8884
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Cc: Joel Stanley <joel@jms.id.au>
Acked-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This defconfig was generated by savedefconfig but we usually
use a manually modified defconfig to add some comments for
Kconfig symbols.
No content change intended.
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Cc: Joel Stanley <joel@jms.id.au>
Acked-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Now based on 4.19.97 (from 4.19.75).
Go back to sha1 version scheme instead of official tag (after
only two tag versions) to get an up-to-date kernel version
(as the offical last tag is for 4.19.94).
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump U-Boot to 2020.01 version and kernel to 5.4.8.
Signed-off-by: Pedro Jardim <jardim.c.pedro@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump U-Boot to 2020.01 version and kernel to 5.4.8.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit ada40afb32 updated the raspberrypi*defconfigs to use
-add-miniuart-bt-overlay instead of -add-pi3-miniuart-bt-overlay.
Update raspberrypi0w_defconfig also.
Signed-off-by: Christopher McCrory <chrismcc@gmail.com>
Reviewed-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Now that the metadata_csum ext4 option is disabled, we no longer need
the U-Boot workaround.
Signed-off-by: Bartosz Bilas <b.bilas@grinn-global.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The U-Boot ext4 write support doesn't work with the metadata_csum
option, and the stm32mp157 U-Boot defconfig uses an environment stored
in an ext4 filesystem, so we must create the ext4 root filesystem
without the metadata_csum option enabled.
Signed-off-by: Bartosz Bilas <b.bilas@grinn-global.com>
[Thomas: only disable the metadata_csum option, the 64bit and
dir_index options can be kept enabled]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Linux version is changed to 4.19.91 (the last version of 4.19).
Build- and runtime-tested for aarch64 and x86_64.
Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
[yann.morin.1998@free.fr: add the test report provided by Philipe on IRC]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Use support/scripts/genimage.sh, instead, which prevents duplicating
TARGET_DIR under ${BUILD_DIR}/genimage.tmp/root.
Use a post-build script to copy uEnv.txt to BINARIES_DIR, as made for
beaglebone.
Drop the post-image script.
Signed-off-by: Carlos Santos <unixmania@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Use the same kernel repository and version as configs/beaglebone
- Rename kernel fragment file
- Update U-Boot to 2019.07
- Select weston and qt5wayland
- Select host-uboot-tools with FIT support, required to create the
images.
Signed-off-by: Lothar Felten <lothar.felten@gmail.com>
Signed-off-by: Carlos Santos <unixmania@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The build of raspberrypi3_qt5we_defconfig currently fails because the
filesystem image size is no longer large enough to contain everything:
the filesystem image size is 360 MB, but the total filesystem size
reported by "make graph-size" is 370 MB.
Let's increase the size to 400 MB for good measure.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/389451889
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Bump kernel, ATF and U-Boot to the versions found in the NXP BSP 4.14.98.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The function was wrong, missing '$', and we also fix the filename,
which was prefixed at91bootstrap and not at91bootstrap3 as it should
have been.
Fixes: 8064095332 ("configs/atmel: use tarballs to fetch U-Boot and at91bootstrap")
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The videotestsrc Gstreamer plugin is very useful for testing.
Enable it by default.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Update Kernel, U-Boot and ATF to TechNexion BSP, based on NXP
4.14.98_2.0.0 release.
This patch also remove BR2_TARGET_UBOOT_FORMAT_IMX in defconfig which
is not needed for this platform.
Signed-off-by: Julien Olivain <juju@cotds.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Update Kernel, U-Boot and ATF to TechNexion BSP, based on NXP
4.14.98_2.0.0 release.
This patch also remove BR2_TARGET_UBOOT_FORMAT_IMX in defconfig which
is not needed for this platform.
Signed-off-by: Julien Olivain <juju@cotds.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes:
514 scripts/extract-cert.c:21:25: fatal error: openssl/bio.h: No such file or directory
515 #include <openssl/bio.h>
Seen at:
https://gitlab.com/buildroot.org/buildroot/-/jobs/378314247
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Like all Allwinner platforms, building the licheepi_zero U-Boot
configuration requires pylibfdt.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/378314331
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump kernel to 5.4.1 version and U-Boot to 2019.10.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This remove the file boot.cmd to use an extlinux.conf instead.
Signed-off-by: Louis Aussedat <aussedat.louis@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Update Kernel, U-Boot and ATF to NXP BSP version rel_imx_4.14.98_2.0.0_ga
Signed-off-by: Julien Olivain <juju@cotds.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This configuration builds a 64bit image for RaspberryPi 4.
Signed-off-by: Arthur Courtel <arthur.courtel@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The pi3-minuart-bt Device Tree overlay has been renamed to
miniuart-bt, as it is useful/usable for other platforms than the
RPi3. So we use this DT overlay and rename the
--add-pi3-miniuart-bt-overlay option to --add-miniuart-bt-overlay
accordingly.
Signed-off-by: Arthur Courtel <arthur.courtel@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Updated kernel version for pcDuino board requires host-openssl
to build successfully. This commit adds the required option:
BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
Fixes: https://gitlab.com/buildroot.org/buildroot/-/jobs/371286142
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Use tarballs for U-Boot and at91bootstrap instead of cloning the
repositories.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Instead use the generic infrastructure for u-boot scripts and genimage.
Signed-off-by: Viktar Palstsiuk <viktar.palstsiuk@promwad.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Let genimage determine rootfs partition size based on the filesystem
image size.
Signed-off-by: Viktar Palstsiuk <viktar.palstsiuk@promwad.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Update configs with latest linux4sam and at91bootstrap.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
