buildroot/board/solidrun/mx6cubox
Fabio Estevam f2d98f3744 configs: Add support for Solidrun's MX6 Cubox/Hummingboard
Add support for Solidrun's MX6 Cubox/Hummingboard.

For more information about these boards, please check:

https://www.solid-run.com/freescale-imx6-family/hummingboard/
https://www.solid-run.com/freescale-imx6-family/cubox-i/

U-Boot is capable of detecting the version of the board in run-time
and loads the correct dtb.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2016-09-14 22:58:31 +02:00
..
boot.scr.txt configs: Add support for Solidrun's MX6 Cubox/Hummingboard 2016-09-14 22:58:31 +02:00
genimage.cfg configs: Add support for Solidrun's MX6 Cubox/Hummingboard 2016-09-14 22:58:31 +02:00
post-build.sh configs: Add support for Solidrun's MX6 Cubox/Hummingboard 2016-09-14 22:58:31 +02:00
post-image.sh configs: Add support for Solidrun's MX6 Cubox/Hummingboard 2016-09-14 22:58:31 +02:00
readme.txt configs: Add support for Solidrun's MX6 Cubox/Hummingboard 2016-09-14 22:58:31 +02:00

Solidrun's MX6 Cubox/Hummingboard

https://www.solid-run.com/freescale-imx6-family/hummingboard/

https://www.solid-run.com/freescale-imx6-family/cubox-i/

To build a minimal support for these boards:

    $ make mx6cubox_defconfig
    $ make

Buildroot prepares a bootable "sdcard.img" image in the output/images/
directory, ready to be dumped on an SD card:

dd if=output/images/sdcard.img of=/dev/<your-microsd-device>

For details about the medium image layout, see the definition in
board/solidrun/mx6cubox/genimage.cfg.