buildroot/board/asus/tinker
Jagan Teki 98b68d08fa board: Add Tinker RK3288 board support
Add Tinker board, from rk3288 family SOC.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2018-02-06 11:39:48 +01:00
..
extlinux.conf board: Add Tinker RK3288 board support 2018-02-06 11:39:48 +01:00
genimage.cfg board: Add Tinker RK3288 board support 2018-02-06 11:39:48 +01:00
post-build.sh board: Add Tinker RK3288 board support 2018-02-06 11:39:48 +01:00
readme.txt board: Add Tinker RK3288 board support 2018-02-06 11:39:48 +01:00

Tinker RK3288
=============

Tinker Board is a Single Board Computer (SBC) in an ultra-small form
factor that offers class-leading performance while leveraging outstanding
mechanical compatibility.

Tinker link:
https://www.asus.com/in/Single-Board-Computer/Tinker-Board/

Wiki link:
https://openedev.amarulasolutions.com/display/ODWIKI/Tinker+RK3288

How to build it
===============

  $ make asus_tinker_rk3288_defconfig

Then you can edit the build options using

  $ make menuconfig

Compile all and build rootfs image:

  $ make

Prepare your SDCard
===================

Buildroot generates a ready-to-use SD card image that you can flash directly to
the card. The image will be in output/images/sdcard.img.
You can write this image directly to an SD card device (i.e. /dev/xxx):

  $ sudo dd if=output/images/sdcard.img of=/dev/xxx
  $ sudo sync

Finally, you can insert the SD card to the Tinker RK3288 board and boot it.