buildroot

History

Dagg Stompler e715914a38 configs/odroidc2: update boot.ini to 5ce6bcc6d8048ba5ff351516b751d52f5cda6981 changes: - add multicam support - add the new options - organization and add uhs and card remove controls - clarify hdmi/dvi/vga selection Signed-off-by: Dagg Stompler <daggs@gmx.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>		2017-02-06 14:03:55 +01:00
..
boot.ini	configs/odroidc2: update boot.ini to 5ce6bcc6d8048ba5ff351516b751d52f5cda6981	2017-02-06 14:03:55 +01:00
genimage.cfg	board: add support for Hardkernel ODROID-C2 Board	2016-04-23 22:15:44 +02:00
post-image.sh	board: add support for Hardkernel ODROID-C2 Board	2016-04-23 22:15:44 +02:00
readme.txt	board: add support for Hardkernel ODROID-C2 Board	2016-04-23 22:15:44 +02:00

readme.txt

ODROID-C2

Intro
=====
To be able to use ODROID-C2 board with the images generated by
Buildroot, you have to prepare the SDCard or eMMC.

How to build it
===============

  $ make odroidc2_defconfig

Then you can edit the build options using

  $ make menuconfig

Compile all and build rootfs image:

  $ make

Note: you will need to have access to the network, since Buildroot will
download the packages' sources.

Result of the build
-------------------

After building, you should obtain this tree:

    output/images/
    +-- Image
    +-- boot.ini                   [1]
    +-- boot.vfat
    +-- meson64_odroidc2.dtb
    +-- rootfs.ext2
    +-- rootfs.ext4
    +-- rootfs.tar
    +-- sdcard.img
    `-- u-boot.bin

[1] This is the ODROID-C2 configuration file used in u-boot.

How to write the SD card or eMMC
================================

Once the build process is finished you will have an image called "sdcard.img"
in the output/images/ directory.

Copy the bootable "sdcard.img" onto an SD card or eMMC with "dd":

  $ sudo dd if=output/images/sdcard.img of=/dev/sdX

Insert the SDcard into your ODROID-C2, and power it up. Your new system
should come up now.