buildroot/board/avnet/s6lx9_microboard
Stephan Hoffmann 49084a1982 Microblaze: added defconfig for Avnet S6LX9 Microboard
The Avnet S6LX9 Microboard is a small USB-Stick sized module
containing a Spartan6 FPGA capable of running the Microblaze
softcore processor together with RAM and FLASH memory.

This board support pachage assumes that the Microblaze Bitfile
available from the Avnet website is programmed into the FPGA.

Signed-off-by: Stephan Hoffmann <sho@relinux.de>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2012-03-18 22:57:17 +01:00
..
lx9_mmu.dts Microblaze: added defconfig for Avnet S6LX9 Microboard 2012-03-18 22:57:17 +01:00
lx9_mmu_defconfig Microblaze: added defconfig for Avnet S6LX9 Microboard 2012-03-18 22:57:17 +01:00
readme.txt Microblaze: added defconfig for Avnet S6LX9 Microboard 2012-03-18 22:57:17 +01:00

readme.txt

This is the buildroot board support for the Avnet Spartan6 LX9 MicroBoard.

The Avnet S6LX9 Microboard is a small USB-Stick sized module containing
a Spartan6 FPGA capable of running the Microblaze softcore processor
together with RAM and FLASH memory.

The board can be bought from Avnet (avnet.com) or from Trenz Electronic
(www.trenz-electronic.de) for a low price.

To run the Linux built with buildroot you have to install the FPGA bitfile
and u-boot as described in the tutorial AvtS6LX9MicroBoard_SW302_PetaLinux
available on http://www.em.avnet.com/s6microboard

On this site also is a forum containing information on how to build your own
Microblaze processor for the Microboard.

The image file (default name is simpleImage.lx9_mmu.ub) has to be copied
to your tftp folder (often /tftpboot/) or can be programmed into the
board's SPI flash.

Sample session:

$ make s6lx9_microboard_defconfig
$ make
$ cp build/linux-<version>/arch/microblaze/boot/simpleImage.lx9_mmu.ub /tftpboot/br12.2a.ub
$ minicom
<hit the reset button on the S6LX9 Microboard>

                Icache:ON
                Dcache:ON
        U-Boot Start:0x83f00000
SF: Got idcode 20 ba 18 10 01
*** Warning - bad CRC, using default environment

Net:   Xilinx_Emaclite
MAC:   00:0a:35:00:63:37
U-BOOT for Avnet-LX9-Microboard-AXI-tiny-13.1

BOOTP broadcast 1
DHCP client bound to address 192.168.11.122
Hit any key to stop autoboot:  0
U-Boot-PetaLinux> tftp br12.2a.ub
Using Xilinx_Emaclite device
TFTP from server 192.168.11.10; our IP address is 192.168.11.122
Filename 'br12.2a.ub'.
Load address: 0x80002000
Loading: #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         ##############################
done
Bytes transferred = 5207724 (4f76ac hex)
U-Boot-PetaLinux> bootm
## Booting kernel from Legacy Image at 80002000 ...
   Image Name:   Linux-3.1.0
   Image Type:   MicroBlaze Linux Kernel Image (uncompressed)
   Data Size:    5207660 Bytes =  5 MB
   Load Address: 80000000
   Entry Point:  80000000
   Verifying Checksum ... OK
   Loading Kernel Image ... OK
OK
## Transferring control to Linux (at address 80000000), 0x80000000 ramdisk 0x00000000, FDT 0x00000000...
Early console on uartlite at 0x40600000
..... boot log skipped

Welcome to Microblaze Buildroot
Microblaze login: