BSH SMM S2 PRO (SystemMaster S2 Pro) Board is an add-on board which
provide input and output interfaces to a dedicated carrier board. It is
designed mainly to provide graphical/video and connectivity interfaces
to the appliance.
Board support package includes the following components:
- mainline Linux kernel 6.1.6
- mainline U-Boot 2022-07
- Default packages from buildroot
https://www.apertis.org/reference_hardware/imx8mn_bsh_smm_s2pro_setup/
Add Ariel D'Alessandro and Dario Binacchi as co-maintainer, we work
together on platform mainline
Build and tested using:
docker pull registry.gitlab.com/buildroot.org/buildroot/base:20220105.2314
Cc: Ariel D'Alessandro <ariel.dalessandro@collabora.com>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Heiko Thiery <heiko.thiery@gmail.com>
Cc: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Tested-by: Ariel D'Alessandro <ariel.dalessandro@collabora.com>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This file contains ambiguous Unicode characters that may be confused with others in your current locale. If your use case is intentional and legitimate, you can safely ignore this warning. Use the Escape button to highlight these characters.
i.MX8MN BSH SMM S2
==================
This tutorial describes how to use the predefined Buildroot
configuration for the i.MX8MN BSH SMM S2 PRO board.
Building
--------
Configure buildroot:
$ make imx8mn_bsh_smm_s2_defconfig
Change settings to fit your needs (optional):
$ make menuconfig
Compile everything and build the rootfs image:
$ make
Result of the build
-------------------
After building, the output/images directory contains:
output/images/
├── bl31.bin
├── ddr3*
├── flash.bin
├── freescale/imx8mn-bsh-smm-s2.dtb
├── Image
├── nand-full.lst
├── rootfs.ext2
├── rootfs.ext4 -> rootfs.ext2
├── rootfs.tar
├── rootfs.ubifs
├── u-boot.bin
└── u-boot-spl.bin
Preparing the board
-------------------
Plug the USB type A to micro B cable into the USB Debug
Connector (DBG UART). Use serial port settings 115200 8N1
to access the debug console.
Plug another USB type A to micro B cable into the USB-OTG
Connector (USB1). This connection is used to flash the board
firmware using the Freescale/NXP UUU tool.
Connect the power supply/adaptor to the DC Power Jack (labelled
+5V).
Flashing
--------
Power up the board by switching on the Power ON Switch, which is
placed right next to the DC Jack.
Enter the following U-Boot commands on the debug serial console:
$ nand erase.chip
$ reset
Flash the built images directly to board’s memory. On your computer,
run:
$ board/bsh/imx8mn-bsh-smm-s2/flash.sh output/
It will flash the bootloader, the Device Tree Blob, the kernel image
and the UBI root file system.
498797acce