buildroot

History

Sergey Matyukevich a0eecad195 orangepi: drop custom post-build and post-image scripts Currently in Orange Pi boards post-build script is used only to generate U-Boot boot script and post-image script is used only to generate sdcard image according to genimage configuration. However both those tasks can now be handled by generic Buildroot tools: - BR2_TARGET_UBOOT_BOOT_SCRIPT config options - support/scripts/genimage.sh script This patch drops custom scripts replacing them by generic Buildroot tools. Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>		2018-01-07 21:37:20 +01:00
..
boot.cmd	orangepi: add basic support for orangepi-one board	2016-12-15 17:11:03 +01:00
genimage.cfg	orangepi: add basic support for orangepi-one board	2016-12-15 17:11:03 +01:00
readme.txt	orangepi: add basic support for orangepi-one board	2016-12-15 17:11:03 +01:00

readme.txt

OrangePi One

Intro
=====

This default configuration will allow you to start experimenting with the
buildroot environment for the OrangePi One. With the current configuration
it will bring-up the board, and allow access through the serial console.

How to build it
===============

Configure Buildroot:

    $ make orangepi_one_defconfig

Compile everything and build the SD card image:

    $ make

How to write the SD card
========================

Once the build process is finished you will have an image called "sdcard.img"
in the output/images/ directory.

Copy the bootable "sdcard.img" onto an SD card with "dd":

  $ sudo dd if=output/images/sdcard.img of=/dev/sdX