buildroot

History

Sergey Matyukevich 81175e5580 board/orangepi-pc-plus: switch to GPT partitions for PARTLABEL support In new kernels sunxi-mmc driver has been switched to asynchronous probe. As a result, mmc (SD/eMMC) indexes can be shuffled breaking board boot. Switch to GPT partitions to use partition labels instead of explicit mmcblk device names. Note that the default GPT partition table location conflicts with the SPL location, so move GPT table after bootloaders. Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com> Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>		2021-07-13 21:57:15 +02:00
..
boot.cmd	board/orangepi-pc-plus: switch to GPT partitions for PARTLABEL support	2021-07-13 21:57:15 +02:00
genimage.cfg	board/orangepi-pc-plus: switch to GPT partitions for PARTLABEL support	2021-07-13 21:57:15 +02:00
linux-extras.config	board/orangepi: add support for orangepi-pc-plus board	2017-12-03 23:22:30 +01:00
readme.txt	board/orangepi: add support for orangepi-pc-plus board	2017-12-03 23:22:30 +01:00

readme.txt

OrangePi PC Plus

Intro
=====

This default configuration will allow you to start experimenting with the
buildroot environment for the OrangePi PC Plus. With the current configuration
it will bring-up the board, and allow access through the serial console.

How to build it
===============

Configure Buildroot:

    $ make orangepi_pc_plus_defconfig

Compile everything and build the SD card image:

    $ make

How to write the SD card
========================

Once the build process is finished you will have an image called "sdcard.img"
in the output/images/ directory.

Copy the bootable "sdcard.img" onto an SD card with "dd":

  $ sudo dd if=output/images/sdcard.img of=/dev/sdX