87d9b946a5
Add initial support for Orangepi Zero Plus board: - U-Boot 2020.10 - Linux 5.7.19 - Default packages from buildroot This patch is based on Orangepi Zero Plus2 board support, so genimage configuration and description is copy pasted. One difference is that newer Linux and U-Boot are selected. Another difference is Ethernet support (Plus) instead of WiFi (Plus2). Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
35 lines
933 B
Plaintext
35 lines
933 B
Plaintext
Intro
|
|
=====
|
|
|
|
This default configuration will allow you to start experimenting with the
|
|
buildroot environment for the Orangepi Zero Plus. With the current configuration
|
|
it will bring-up the board, and allow access through the serial console.
|
|
|
|
Orangepi Zero Plus link:
|
|
http://www.orangepi.org/OrangePiZeroPlus/
|
|
|
|
This configuration uses U-Boot mainline and kernel mainline.
|
|
|
|
How to build
|
|
============
|
|
|
|
$ make orangepi_zero_plus_defconfig
|
|
$ make
|
|
|
|
Note: you will need access to the internet to download the required
|
|
sources.
|
|
|
|
How to write the SD card
|
|
========================
|
|
|
|
Once the build process is finished you will have an image called "sdcard.img"
|
|
in the output/images/ directory.
|
|
|
|
Copy the bootable "sdcard.img" onto an SD card with "dd":
|
|
|
|
$ sudo dd if=output/images/sdcard.img of=/dev/sdX
|
|
$ sudo sync
|
|
|
|
Insert the micro SDcard in your Orangepi Zero Plus and power it up. The console
|
|
is on the serial line, 115200 8N1.
|