buildroot/Config.in.legacy
Yann E. MORIN b581bba9c4 package/linux-firmware: install Xceive/Cresta xc4000 and xc5000c
Tweak the prompt, because Xceive is now part of Cresta, so the
new xc5000c-based devices might be branded under either name.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2014-09-21 21:15:03 +02:00

975 lines
32 KiB
Plaintext

#
# Config.in.legacy - support for backward compatibility
#
# When an existing Config.in symbol is removed, it should be added again in
# this file, and take appropriate action to approximate backward compatibility.
# This will make the transition for the user more convenient.
#
# When adding legacy symbols to this file, add them to the front. The oldest
# symbols will be removed again after about two years.
#
# The symbol should be copied as-is from the place where it was previously
# defined, but the help text should be removed or replaced with something that
# explains how to fix it.
#
# For bool options, the old symbol should select BR2_LEGACY, so that the user
# is informed at build-time about selected legacy options.
# If there is an equivalent (set of) new symbols, these should be select'ed by
# the old symbol for backwards compatibility.
#
# For string options, it is not possible to directly select another symbol. In
# this case, a hidden wrap bool option has to be added, that defaults to y if
# the old string is not set at its default value. The wrap symbol should select
# BR2_LEGACY.
# If the original symbol has been renamed, the new symbol should use the value
# of the old symbol as default. This requires a change outside of
# Config.in.legacy, and this should be clearly marked as such below, so that
# removal of legacy options also include the removal of these external
# references.
#
# [Example: renaming a string option from FOO to BAR]
# original symbol:
# config BR2_FOO_STRING
# string "Some foo string"
#
# becomes:
# config BR2_BAR_STRING
# string "Some bar string"
# default BR2_FOO_STRING if BR2_FOO_STRING != "" # legacy
#
# and in Config.in.legacy:
# config BR2_FOO_STRING
# string "The foo string has been renamed"
# help
# <suitable help text>
#
# config BR2_FOO_STRING_WRAP
# bool
# default y if BR2_FOO_STRING != ""
# select BR2_LEGACY
#
# # Note: BR2_FOO_STRING is still referenced from package/foo/Config.in
#
# [End of example]
config BR2_LEGACY
bool
help
This option is selected automatically when your old .config uses an
option that no longer exists in current buildroot. In that case, the
build will fail. Look for config options which are selected in the
menu below: they no longer exist and should be replaced by something
else.
# This comment fits exactly in a 80-column display
comment "Legacy detected: check the content of the menu below"
depends on BR2_LEGACY
menu "Legacy config options"
if BR2_LEGACY
comment "----------------------------------------------------"
comment "Your old configuration uses legacy options that no "
comment "longer exist in buildroot, as indicated in the menu "
comment "below. As long as these options stay selected, or in"
comment "case of string options are non-empty, the build "
comment "will fail. "
comment "* "
comment "Where possible, an automatic conversion from old to "
comment "new symbols has been performed. Before making any "
comment "change in this legacy menu, make sure to exit the "
comment "configuration editor a first time and save the "
comment "configuration. Otherwise, the automatic conversion "
comment "of symbols will be lost. "
comment "* "
comment "After this initial save, reopen the configuration "
comment "editor, inspect the options selected below, read "
comment "their help texts, and verify/update the new "
comment "configuration in the corresponding configuration "
comment "menus. When everything is ok, you can disable the "
comment "legacy options in the menu below. Once you have "
comment "disabled all legacy options, this text will "
comment "disappear and you will be able to start the build. "
comment "* "
comment "Note: at some point in the future, the oldest legacy"
comment "options will be removed, and configuration files "
comment "that still have those options set, will fail to "
comment "build, or run, in unpredictable ways. "
comment "----------------------------------------------------"
endif
###############################################################################
comment "Legacy options removed in 2014.11"
config BR2_PACKAGE_LINUX_FIRMWARE_XC5000
bool "Xceive xc5000 option has been renamed"
select BR2_PACKAGE_LINUX_FIRMWARE_XCx000
help
The Xceive xc5000 option now also handles older firmwares from
Xceive (the xc4000 series), as well as new firmwares (the xc5000c)
from Cresta, who bought Xceive.
config BR2_PACKAGE_LINUX_FIRMWARE_CXGB4
bool "Chelsio T4 option has been renamed"
select BR2_PACKAGE_LINUX_FIRMWARE_CXGB4_T4
help
The Chelsio T4 option BR2_PACKAGE_LINUX_FIRMWARE_CXGB4
has been renamed to BR2_PACKAGE_LINUX_FIRMWARE_CXGB4_T4
to better account for the fact that a T5 variant exists.
config BR2_PACKAGE_LINUX_FIRMWARE_IWLWIFI_3160_7260_7
bool "BR2_PACKAGE_LINUX_FIRMWARE_IWLWIFI_3160_7260_7 has been renamed"
help
The option BR2_PACKAGE_LINUX_FIRMWARE_IWLWIFI_3160_7260_7 was
renamed to BR2_PACKAGE_LINUX_FIRMWARE_IWLWIFI_REV_7. You must
select it in:
Target packages -> Hardware handling ->
Firmware -> linux-firmware -> WiFi firmware ->
iwlwifi 3160/726x revision to use (revision 7)
config BR2_PACKAGE_LINUX_FIRMWARE_IWLWIFI_3160_7260_8
bool "BR2_PACKAGE_LINUX_FIRMWARE_IWLWIFI_3160_7260_8 has been renamed"
help
The option BR2_PACKAGE_LINUX_FIRMWARE_IWLWIFI_3160_7260_8 was
renamed to BR2_PACKAGE_LINUX_FIRMWARE_IWLWIFI_REV_8. You must
select it in:
Target packages -> Hardware handling ->
Firmware -> linux-firmware -> WiFi firmware ->
iwlwifi 3160/726x revision to use (revision 8)
###############################################################################
comment "Legacy options removed in 2014.08"
config BR2_PACKAGE_LIBELF
bool "libelf has been removed"
select BR2_PACKAGE_ELFUTILS
select BR2_LEGACY
help
The libelf package provided an old version of the libelf library
and is deprecated. The libelf library is now provided by the
elfutils package.
config BR2_KERNEL_HEADERS_3_8
bool "kernel headers version 3.8.x are no longer supported"
select BR2_KERNEL_HEADERS_3_9
select BR2_LEGACY
help
Version 3.8.x of the Linux kernel headers have been deprecated
for more than four buildroot releases and are now removed.
As an alternative, version 3.9.x of the headers have been
automatically selected in your configuration.
config BR2_PACKAGE_GETTEXT_TOOLS
bool "support for gettext-tools on target has been removed"
select BR2_LEGACY
help
The option to install the gettext utilities on the target
has been removed. This is not necessary as Buildroot is not
designed to provide a full development environment on the
target. gettext tools should be used on the build machine
instead.
config BR2_PACKAGE_PROCPS
bool "procps has been replaced by procps-ng"
select BR2_PACKAGE_PROCPS_NG
select BR2_LEGACY
help
The procps package has been replaced by the equivalent procps-ng.
config BR2_BINUTILS_VERSION_2_20_1
bool "binutils 2.20.1 has been removed"
select BR2_LEGACY
help
The 2.20.1 version of binutils has been removed. Use a newer
version instead.
config BR2_BINUTILS_VERSION_2_21
bool "binutils 2.21 has been removed"
select BR2_LEGACY
help
The 2.21 version of binutils has been removed. Use a newer
version instead.
config BR2_BINUTILS_VERSION_2_23_1
bool "binutils 2.23.1 has been removed"
select BR2_LEGACY
help
The 2.23.1 version of binutils has been removed. Use a newer
version instead.
config BR2_UCLIBC_VERSION_0_9_32
bool "uclibc 0.9.32 has been removed"
select BR2_LEGACY
help
The 0.9.32 version of uClibc has been removed. Use a newer
version instead.
config BR2_GCC_VERSION_4_3_X
bool "gcc 4.3.x has been removed"
select BR2_LEGACY
help
The 4.3.x version of gcc has been removed. Use a newer
version instead.
config BR2_GCC_VERSION_4_6_X
bool "gcc 4.6.x has been removed"
select BR2_LEGACY
help
The 4.6.x version of gcc has been removed. Use a newer
version instead.
config BR2_GDB_VERSION_7_4
bool "gdb 7.4 has been removed"
select BR2_LEGACY
help
The 7.4 version of gdb has been removed. Use a newer version
instead.
config BR2_GDB_VERSION_7_5
bool "gdb 7.5 has been removed"
select BR2_LEGACY
help
The 7.5 version of gdb has been removed. Use a newer version
instead.
config BR2_BUSYBOX_VERSION_1_19_X
bool "busybox version selection has been removed"
select BR2_LEGACY
help
The possibility of selecting the Busybox version has been
removed. Use the latest version provided by the Busybox
package instead.
config BR2_BUSYBOX_VERSION_1_20_X
bool "busybox version selection has been removed"
select BR2_LEGACY
help
The possibility of selecting the Busybox version has been
removed. Use the latest version provided by the Busybox
package instead.
config BR2_BUSYBOX_VERSION_1_21_X
bool "busybox version selection has been removed"
select BR2_LEGACY
help
The possibility of selecting the Busybox version has been
removed. Use the latest version provided by the Busybox
package instead.
config BR2_PACKAGE_LIBV4L_DECODE_TM6000
bool "decode_tm6000"
select BR2_PACKAGE_LIBV4L_UTILS
select BR2_LEGACY
help
This libv4l option has been deprecated and replaced by a single
option to build all the libv4l utilities.
config BR2_PACKAGE_LIBV4L_IR_KEYTABLE
bool "ir-keytable"
select BR2_PACKAGE_LIBV4L_UTILS
select BR2_LEGACY
help
This libv4l option has been deprecated and replaced by a single
option to build all the libv4l utilities.
config BR2_PACKAGE_LIBV4L_V4L2_COMPLIANCE
bool "v4l2-compliance"
select BR2_PACKAGE_LIBV4L_UTILS
select BR2_LEGACY
help
This libv4l option has been deprecated and replaced by a single
option to build all the libv4l utilities.
config BR2_PACKAGE_LIBV4L_V4L2_CTL
bool "v4l2-ctl"
select BR2_PACKAGE_LIBV4L_UTILS
select BR2_LEGACY
help
This libv4l option has been deprecated and replaced by a single
option to build all the libv4l utilities.
config BR2_PACKAGE_LIBV4L_V4L2_DBG
bool "v4l2-dbg"
select BR2_PACKAGE_LIBV4L_UTILS
select BR2_LEGACY
help
This libv4l option has been deprecated and replaced by a single
option to build all the libv4l utilities.
###############################################################################
comment "Legacy options removed in 2014.05"
config BR2_PACKAGE_EVTEST_CAPTURE
bool "evtest-capture support removed (dropped since evtest 1.31)"
select BR2_LEGACY
help
Support for evtest-capture has been removed (dropped from
evtest package since version 1.31), use evemu package
instead.
config BR2_KERNEL_HEADERS_3_6
bool "kernel headers version 3.6.x are no longer supported"
select BR2_KERNEL_HEADERS_3_9
select BR2_LEGACY
help
Version 3.6.x of the Linux kernel headers have been deprecated
for more than four buildroot releases and are now removed.
As an alternative, version 3.8.x of the headers have been
automatically selected in your configuration.
config BR2_KERNEL_HEADERS_3_7
bool "kernel headers version 3.7.x are no longer supported"
select BR2_KERNEL_HEADERS_3_9
select BR2_LEGACY
help
Version 3.7.x of the Linux kernel headers have been deprecated
for more than four buildroot releases and are now removed.
As an alternative, version 3.8.x of the headers have been
automatically selected in your configuration.
config BR2_PACKAGE_VALA
bool "vala target package has been removed"
select BR2_LEGACY
help
The 'vala' target package has been removed since it has been
deprecated for more than four buildroot releases.
Note: the host vala package still exists.
config BR2_TARGET_TZ_ZONELIST
default BR2_PACKAGE_TZDATA_ZONELIST if BR2_PACKAGE_TZDATA_ZONELIST != ""
config BR2_PACKAGE_TZDATA_ZONELIST
string "tzdata: the timezone list option has been renamed"
help
The option BR2_PACKAGE_TZDATA_ZONELIST has been renamed to
BR2_TARGET_TZ_ZONELIST, and moved to the "System configuration"
menu. You'll need to select BR2_TARGET_TZ_INFO.
config BR2_PACKAGE_TZDATA_ZONELIST_WRAP
bool
default y if BR2_PACKAGE_TZDATA_ZONELIST != ""
select BR2_LEGACY
config BR2_PACKAGE_LUA_INTERPRETER_EDITING_NONE
bool "Lua command-line editing none has been renamed"
select BR2_LEGACY
help
The BR2_PACKAGE_LUA_INTERPRETER_EDITING_NONE option has been
renamed to BR2_PACKAGE_LUA_EDITING_NONE. You will have to select
it in the corresponding choice.
config BR2_PACKAGE_LUA_INTERPRETER_READLINE
bool "Lua command-line editing using readline has been renamed"
select BR2_LEGACY
help
The BR2_PACKAGE_LUA_INTERPRETER_READLINE option has been
renamed to BR2_PACKAGE_LUA_READLINE. You will have to select
it in the corresponding choice.
config BR2_PACKAGE_LUA_INTERPRETER_LINENOISE
bool "Lua command-line editing using linenoise has been renamed"
select BR2_LEGACY
help
The BR2_PACKAGE_LUA_INTERPRETER_LINENOISE option has been
renamed to BR2_PACKAGE_LUA_LINENOISE. You will have to select
it in the corresponding choice.
config BR2_PACKAGE_DVB_APPS_UTILS
bool "dvb-apps utilities now built by default"
select BR2_LEGACY
help
The dvb-apps utilities are now always built when the dvb-apps
package is selected.
config BR2_KERNEL_HEADERS_SNAP
bool "Local Linux snapshot support removed"
select BR2_LEGACY
help
Support for using a custom snapshot to install the Linux
kernel headers has been removed.
config BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_UDEV
bool "/dev management by udev removed"
select BR2_LEGACY
help
The 'udev' package has been converted to a virtual package.
The providers for this feature are: 'eudev', 'systemd'.
Therefore, if you are not using 'systemd' as init system, you
must choose 'Dynamic using eudev' in the '/dev management'
menu to get the same behaviour as in your old configuration.
If you are using 'systemd', its internal implementation of
'udev' will be used automatically.
You must also check the packages depending on 'udev' are still
selected.
config BR2_PACKAGE_UDEV
bool "udev is now a virtual package"
select BR2_LEGACY
select BR2_PACKAGE_HAS_UDEV
help
The 'udev' package has been converted to a virtual package.
The providers for this feature are: 'eudev', 'systemd'.
Your old configuration refers to packages depending on 'udev',
either for build or at runtime.
Check that a 'udev' provider is selected. If you are not using
'systemd' as init system, 'eudev' should be selected, which is
the case if '/dev management' is set to 'Dynamic using eudev'.
If you are using 'systemd', its internal implementation of 'udev'
is used.
config BR2_PACKAGE_UDEV_RULES_GEN
bool "udev rules generation handled by provider"
select BR2_LEGACY
select BR2_PACKAGE_EUDEV if !BR2_INIT_SYSTEMD
select BR2_PACKAGE_EUDEV_RULES_GEN if !BR2_INIT_SYSTEMD
help
The 'udev' package has been converted to a virtual package.
The providers for this feature are: 'eudev', 'systemd'.
If you are not using 'systemd' as init system, udev rules
generation will be handled by 'eudev'. Check that
'/dev management' is set to 'Dynamic using eudev' to get
the same behaviour as in your old configuration.
If you are using 'systemd', it internal implementation of 'udev'
will generate the rules.
config BR2_PACKAGE_UDEV_ALL_EXTRAS
bool "udev extras removed"
select BR2_LEGACY
help
The 'udev' package has been converted to a virtual package.
The providers for this feature are: 'eudev', 'systemd'.
The option to enable the extra features of 'udev' (gudev, ...)
has been removed. These features are automatically enabled in
the 'udev' providers if the dependencies are selected. For
example, selecting 'libglib2' will trigger the build of gudev.
config BR2_PACKAGE_XLIB_LIBPTHREAD_STUBS
bool "xlib-libpthread-stubs option has been renamed"
depends on BR2_PACKAGE_XORG7
select BR2_LEGACY
select BR2_PACKAGE_LIBPTHREAD_STUBS
help
The pthread stubs neither depend on X11 nor Xlib. Thus the
package has been renamed BR2_PACKAGE_LIBPTHREAD_STUBS
###############################################################################
comment "Legacy options removed in 2014.02"
config BR2_sh2
bool "sh2 support removed"
help
Due to an inexistent user base and generally poor Linux
support, the support for the SH2 architecture was removed.
config BR2_sh3
bool "sh3 support removed"
help
Due to an inexistent user base and generally poor Linux
support, the support for the SH3 architecture was removed.
config BR2_sh3eb
bool "sh3eb support removed"
help
Due to an inexistent user base and generally poor Linux
support, the support for the SH3eb architecture was removed.
config BR2_KERNEL_HEADERS_3_1
bool "kernel headers version 3.1.x are no longer supported"
select BR2_KERNEL_HEADERS_3_2
select BR2_LEGACY
help
Version 3.1.x of the Linux kernel headers have been deprecated
for more than four buildroot releases and are now removed.
As an alternative, version 3.2.x of the headers have been
automatically selected in your configuration.
config BR2_KERNEL_HEADERS_3_3
bool "kernel headers version 3.3.x are no longer supported"
select BR2_KERNEL_HEADERS_3_4
select BR2_LEGACY
help
Version 3.3.x of the Linux kernel headers have been deprecated
for more than four buildroot releases and are now removed.
As an alternative, version 3.4.x of the headers have been
automatically selected in your configuration.
config BR2_KERNEL_HEADERS_3_5
bool "kernel headers version 3.5.x are no longer supported"
select BR2_KERNEL_HEADERS_3_9
select BR2_LEGACY
help
Version 3.5.x of the Linux kernel headers have been deprecated
for more than four buildroot releases and are now removed.
As an alternative, version 3.8.x of the headers have been
automatically selected in your configuration.
config BR2_GDB_VERSION_7_2
bool "gdb 7.2.x is no longer supported"
select BR2_GDB_VERSION_7_6
select BR2_LEGACY
help
Version 7.2.x of gdb has been deprecated for more than four
buildroot releases and is now removed. As an alternative, gdb
7.5.x has been automatically selected in your configuration.
config BR2_GDB_VERSION_7_3
bool "gdb 7.3.x is no longer supported"
select BR2_GDB_VERSION_7_6
select BR2_LEGACY
help
Version 7.3.x of gdb has been deprecated for more than four
buildroot releases and is now removed. As an alternative, gdb
7.5.x has been automatically selected in your configuration.
config BR2_PACKAGE_CCACHE
bool "ccache target package has been removed"
select BR2_LEGACY
help
The 'ccache' target package has been removed since it has been
deprecated for more than four buildroot releases.
Note: using ccache for speeding up builds is still supported.
config BR2_HAVE_DOCUMENTATION
bool "support for documentation on target has been removed"
select BR2_LEGACY
help
Support for documentation on target has been removed since it has
been deprecated for more than four buildroot releases.
config BR2_PACKAGE_AUTOMAKE
bool "automake target package has been removed"
select BR2_LEGACY
help
The 'automake' target package has been removed since it has been
deprecated for more than four buildroot releases.
Note: the host automake still exists.
config BR2_PACKAGE_AUTOCONF
bool "autoconf target package has been removed"
select BR2_LEGACY
help
The 'autoconf' target package has been removed since it has been
deprecated for more than four buildroot releases.
Note: the host autoconf still exists.
config BR2_PACKAGE_XSTROKE
bool "xstroke has been removed"
select BR2_LEGACY
help
The 'xstroke' package has been removed since it has been
deprecated for more than four buildroot releases.
config BR2_PACKAGE_LZMA
bool "lzma target package has been removed"
select BR2_LEGACY
help
The 'lzma' target package has been removed since it has been
deprecated for more than four buildroot releases.
Note: generating lzma-compressed rootfs images is still supported.
config BR2_PACKAGE_TTCP
bool "ttcp has been removed"
select BR2_LEGACY
help
The 'ttcp' package has been removed since it has been
deprecated for more than four buildroot releases.
config BR2_PACKAGE_LIBNFC_LLCP
bool "libnfc-llcp has been replaced by libllcp"
select BR2_LEGACY
select BR2_PACKAGE_LIBLLCP
help
The 'libnfc-llcp' package has been removed since upstream renamed
to 'libllcp'. We have added a new package for 'libllcp' and bumped
the version at the same time.
config BR2_PACKAGE_MYSQL_CLIENT
bool "MySQL client renamed to MySQL"
select BR2_LEGACY
select BR2_PACKAGE_MYSQL
help
The option has been renamed BR2_PACKAGE_MYSQL
config BR2_PACKAGE_SQUASHFS3
bool "squashfs3 has been removed"
select BR2_LEGACY
select BR2_PACKAGE_SQUASHFS
help
The 'squashfs3' package has been removed since it has been
deprecated for more than four buildroot releases. Package
'squashfs' (4) has been selected automatically as replacement.
config BR2_TARGET_ROOTFS_SQUASHFS3
bool "squashfs3 rootfs support has been removed"
select BR2_LEGACY
help
Together with the removal of the squashfs3 package, support
for squashfs3 root filesystems has been removed too. Squashfs
root filesystems will automatically use squashfs4 now.
config BR2_PACKAGE_NETKITBASE
bool "netkitbase has been removed"
select BR2_LEGACY
help
The 'netkitbase' package has been removed since it has been
deprecated since 2012.11. This package provided 'inetd'
which is replaced by 'xinet' and 'ping' which is replaced by
'busybox' or 'fping'.
config BR2_PACKAGE_NETKITTELNET
bool "netkittelnet has been removed"
select BR2_LEGACY
help
The 'netkittelnet' package has been removed since it has
been deprecated since 2012.11. 'busybox' provides a telnet
client and should be used instead.
config BR2_PACKAGE_LUASQL
bool "luasql has been replaced by luasql-sqlite3"
select BR2_PACKAGE_LUASQL_SQLITE3
select BR2_LEGACY
help
The option has been renamed BR2_PACKAGE_LUASQL_SQLITE3.
config BR2_PACKAGE_LUACJSON
bool "luacjson has been replaced by lua-cjson"
select BR2_PACKAGE_LUA_CJSON
select BR2_LEGACY
help
The option has been renamed BR2_PACKAGE_LUA_CJSON.
###############################################################################
comment "Legacy options removed in 2013.11"
config BR2_PACKAGE_LVM2_DMSETUP_ONLY
bool "lvm2's 'dmsetup only' option removed"
select BR2_LEGACY
help
The BR2_PACKAGE_LVM2_DMSETUP_ONLY was a negative option, which
led to problems with other packages that need the full lvm2
suite. Therefore, the option has been replaced with the positive
BR2_PACKAGE_LVM2_STANDARD_INSTALL option.
# Note: BR2_PACKAGE_LVM2_DMSETUP_ONLY is still referenced in package/lvm2/Config.in
# in order to automatically propagate old configs
config BR2_PACKAGE_QT_JAVASCRIPTCORE
bool "qt javascriptcore option removed"
select BR2_LEGACY
help
The BR2_PACKAGE_QT_JAVASCRIPTCORE option was available to
force the activation or disabling of the JIT compiler in the
Qt Javascript interpreter. However, the JIT compiler is not
available for all architectures, so forcing its activation
does not always work. Moreover, Qt knows by itself for which
architectures JIT support is possible, and will
automatically enable it if possible.
Therefore, this option was in fact useless, and causing
build problems when enabled on architectures for which the
JIT support was not available. It has been removed, and
there is no replacement: Qt will enable JIT at compile time
when possible.
config BR2_PACKAGE_MODULE_INIT_TOOLS
bool "module-init-tools replaced by kmod"
select BR2_PACKAGE_KMOD
select BR2_PACKAGE_KMOD_TOOLS
select BR2_LEGACY
help
The 'module-init-tools' package has been removed, since it
has been depracated upstream and replaced by 'kmod'.
config BR2_TARGET_UBOOT_CUSTOM_GIT_REPO_URL
string "u-boot: the git repository URL option has been renamed"
help
The option BR2_TARGET_UBOOT_CUSTOM_GIT_REPO_URL has
been renamed to BR2_TARGET_UBOOT_CUSTOM_REPO_URL.
config BR2_TARGET_UBOOT_CUSTOM_GIT_REPO_URL_WRAP
bool
default y if BR2_TARGET_UBOOT_CUSTOM_GIT_REPO_URL != ""
select BR2_LEGACY
# Note: BR2_TARGET_UBOOT_CUSTOM_GIT_REPO_URL is still referenced from
# boot/uboot/Config.in
config BR2_TARGET_UBOOT_CUSTOM_GIT_VERSION
string "u-boot: the git repository version option has been renamed"
help
The option BR2_TARGET_UBOOT_CUSTOM_GIT_VERSION has
been renamed to BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION.
config BR2_TARGET_UBOOT_CUSTOM_GIT_VERSION_WRAP
bool
default y if BR2_TARGET_UBOOT_CUSTOM_GIT_VERSION != ""
select BR2_LEGACY
# Note: BR2_TARGET_UBOOT_CUSTOM_GIT_VERSION is still referenced from
# boot/uboot/Config.in
config BR2_LINUX_KERNEL_CUSTOM_GIT_REPO_URL
string "linux: the git repository URL option has been renamed"
help
The option BR2_LINUX_KERNEL_CUSTOM_GIT_REPO_URL has
been renamed to
BR2_LINUX_KERNEL_CUSTOM_REPO_URL.
config BR2_LINUX_KERNEL_CUSTOM_GIT_REPO_URL_WRAP
bool
default y if BR2_LINUX_KERNEL_CUSTOM_GIT_REPO_URL != ""
select BR2_LEGACY
# Note: BR2_LINUX_KERNEL_CUSTOM_GIT_REPO_URL is still referenced from
# linux/Config.in
config BR2_LINUX_KERNEL_CUSTOM_GIT_VERSION
string "linux: the git repository version option has been renamed"
help
The option BR2_LINUX_KERNEL_CUSTOM_GIT_VERSION has
been renamed to
BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION.
config BR2_LINUX_KERNEL_CUSTOM_GIT_VERSION_WRAP
bool
default y if BR2_LINUX_KERNEL_CUSTOM_GIT_VERSION != ""
select BR2_LEGACY
# Note: BR2_LINUX_KERNEL_CUSTOM_GIT_VERSION is still referenced from
# linux/Config.in
###############################################################################
comment "Legacy options removed in 2013.08"
config BR2_ARM_OABI
bool "ARM OABI support has been removed"
select BR2_LEGACY
help
The support for the ARM OABI was deprecated since a while,
and has been removed completely from Buildroot. It is also
deprecated in upstream gcc, since gcc 4.7. People should
switch to EABI instead, which should not be a problem as
long as you don't have pre-built OABI binaries in your
system that you can't recompile.
config BR2_PACKAGE_DOSFSTOOLS_DOSFSCK
bool "dosfstools dosfsck renamed to fsck.fat"
select BR2_LEGACY
select BR2_PACKAGE_DOSFSTOOLS_FSCK_FAT
help
dosfsck was renamed upstream to fsck.fat for consistency.
config BR2_PACKAGE_DOSFSTOOLS_DOSFSLABEL
bool "dosfstools dosfslabel renamed to fatlabel"
select BR2_LEGACY
select BR2_PACKAGE_DOSFSTOOLS_FATLABEL
help
doslabel was renamed upstream to fatlabel for consistency.
config BR2_PACKAGE_DOSFSTOOLS_MKDOSFS
bool "dosfstools mkdosfs renamed to mkfs.fat"
select BR2_LEGACY
select BR2_PACKAGE_DOSFSTOOLS_MKFS_FAT
help
mkdosfs was renamed upstream to mkfs.fat for consistency.
config BR2_ELF2FLT
bool "the elf2flt option has been renamed"
select BR2_LEGACY
help
The BR2_ELF2FLT option has been renamed to
BR2_PACKAGE_HOST_ELF2FLT due to the conversion of elf2flt to
the package infrastructure.
config BR2_VFP_FLOAT
bool "the ARM VFP floating point option has been renamed"
select BR2_LEGACY
help
Due to a major refactoring of the floating-point handling of
the ARM architecture support, the BR2_VFP_FLOAT option has
been replaced with a choice of options that allows to select
between various VFP versions/capabilities.
config BR2_PACKAGE_GCC_TARGET
bool "gcc on the target filesystem has been removed"
select BR2_LEGACY
help
The support for gcc in the target filesystem was deprecated
since a while, and has been removed completely from Buildroot.
See Buildroot's documentation for more explanations.
config BR2_HAVE_DEVFILES
bool "development files in target filesystem has been removed"
select BR2_LEGACY
help
The installation of the development files in the target
filesystem was deprecated since a while, and has been removed
completely from Buildroot.
See Buildroot's documentation for more explanations.
###############################################################################
comment "Legacy options removed in 2013.05"
config BR2_PACKAGE_LINUX_FIRMWARE_RTL_8192
bool "Realtek 8192 replaced by Realtek 81xx"
select BR2_LEGACY
select BR2_PACKAGE_LINUX_FIRMWARE_RTL_81XX
help
Now covers the whole Realtek 81xx familly: 8188/8192.
config BR2_PACKAGE_LINUX_FIRMWARE_RTL_8712
bool "Realtek 8712 replaced by Realtek 87xx"
select BR2_LEGACY
select BR2_PACKAGE_LINUX_FIRMWARE_RTL_87XX
help
Now covers the whole Realtek 87xx familly: 8712/8723.
###############################################################################
comment "Legacy options removed in 2013.02"
config BR2_sa110
bool "sa110 ARM target switched to strongarm"
select BR2_LEGACY
select BR2_strongarm
help
The SA110 is the same as a generic StrongARM, it just differs
in speed, peripherals and cache.
config BR2_sa1100
bool "sa1100 ARM target switched to strongarm"
select BR2_LEGACY
select BR2_strongarm
help
The SA1100 is the same as a generic StrongARM, it just differs
in speed, peripherals and cache.
config BR2_PACKAGE_GDISK
bool "gdisk has been replaced by gptfdisk"
select BR2_LEGACY
select BR2_PACKAGE_GPTFDISK
help
The option has been renamed BR2_PACKAGE_GPTFDISK.
config BR2_PACKAGE_GDISK_GDISK
bool "gdisk tool from gdisk has been replaced by gdisk in gptfdisk"
select BR2_LEGACY
select BR2_PACKAGE_GPTFDISK
select BR2_PACKAGE_GPTFDISK_GDISK
help
The option has been renamed BR2_PACKAGE_GPTFDISK_GDISK.
config BR2_PACKAGE_GDISK_SGDISK
bool "sgdisk tool from gdisk has been replaced by sgdisk in gptfdisk"
select BR2_LEGACY
select BR2_PACKAGE_GPTFDISK
select BR2_PACKAGE_GPTFDISK_SGDISK
help
The option has been renamed BR2_PACKAGE_GPTFDISK_SGDISK.
config BR2_PACKAGE_GDB_HOST
bool "gdb for the host option has been renamed"
select BR2_PACKAGE_HOST_GDB
select BR2_LEGACY
help
Due to the conversion of gdb to the package infrastructure,
the BR2_PACKAGE_GDB_HOST option has been renamed
BR2_PACKAGE_HOST_GDB.
config BR2_PACKAGE_DIRECTB_DITHER_RGB16
bool "DirectFB RGB16 dithering option has been renamed"
select BR2_PACKAGE_DIRECTFB_DITHER_RGB16
select BR2_LEGACY
help
The option has been renamed
BR2_PACKAGE_DIRECTFB_DITHER_RGB16.
config BR2_PACKAGE_DIRECTB_TESTS
bool "DirectFB Tests option has been renamed"
select BR2_PACKAGE_DIRECTFB_TESTS
select BR2_LEGACY
help
The option has been renamed
BR2_PACKAGE_DIRECTFB_TESTS.
###############################################################################
comment "Legacy options removed in 2012.11"
config BR2_PACKAGE_CUSTOMIZE
bool "customize package has been removed"
select BR2_LEGACY
help
The 'customize' special package has been removed. Instead,
we recommend to create either your own packages, or use a
post-build script to customize your root filesystem. See
Buildroot's documentation for more details.
config BR2_PACKAGE_XSERVER_xorg
bool "X.org modular server"
select BR2_LEGACY
select BR2_PACKAGE_XSERVER_XORG_SERVER_MODULAR
help
The option has been renamed
BR2_PACKAGE_XSERVER_XORG_SERVER_MODULAR.
config BR2_PACKAGE_XSERVER_tinyx
bool "KDrive / TinyX server"
select BR2_LEGACY
select BR2_PACKAGE_XSERVER_XORG_SERVER_KDRIVE
help
The option has been renamed
BR2_PACKAGE_XSERVER_XORG_SERVER_KDRIVE.
config BR2_PACKAGE_PTHREAD_STUBS
bool "pthread-stubs option has been renamed"
select BR2_LEGACY
select BR2_PACKAGE_LIBPTHREAD_STUBS
help
For consistency reason, the pthread-stubs package has been
renamed to libpthread-stubs.
###############################################################################
comment "Legacy options removed in 2012.08"
config BR2_PACKAGE_GETTEXT_STATIC
bool "libgettext.a is now selected by BR2_PREFER_STATIC_LIB"
select BR2_LEGACY
help
To build a static gettext library, select BR2_PREFER_STATIC_LIB.
config BR2_PACKAGE_LIBINTL
bool "libintl"
select BR2_LEGACY
select BR2_PACKAGE_GETTEXT
help
libintl is now installed by selecting BR2_PACKAGE_GETTEXT. This now
only installs the library, not the executables.
config BR2_PACKAGE_INPUT_TOOLS_EVTEST
bool "input-tools evtest is now a separate package evtest"
select BR2_LEGACY
select BR2_PACKAGE_EVTEST
help
The evtest program from input-tools is now a separate package.
config BR2_BFIN_FDPIC
bool "BR2_BFIN_FDPIC is now BR2_BINFMT_FDPIC"
select BR2_BINFMT_FDPIC
select BR2_LEGACY
config BR2_BFIN_FLAT
bool "BR2_BFIN_FLAT is now BR2_BINFMT_FLAT"
select BR2_BINFMT_FLAT
select BR2_LEGACY
endmenu