buildroot

History

Giulio Benetti 103ceb8d67 board/acmesystems/acqua-a5/genimage.cfg: beautify file Beatify this genimage .cfg file to have consistency with all genimage .cfg files in Buildroot. Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com> Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>		2021-11-08 22:20:34 +01:00
..
at91-sama5d3_acqua.dts	configs/acmesystems_acqua_a5: new defconfigs	2021-03-30 22:15:58 +02:00
genimage.cfg	board/acmesystems/acqua-a5/genimage.cfg: beautify file	2021-11-08 22:20:34 +01:00
readme.txt	configs/acmesystems_acqua_a5: new defconfigs	2021-03-30 22:15:58 +02:00

readme.txt

Acme Systems Acqua A5

Intro
=====

The Acqua A5 is a system on module based on the Microchip SAMA5D31 SoC:

    https://www.acmesystems.it/acqua

The files here support configurations that build a microSD image for a
minimal system that can be accessed through the serial console. You will
need an USB-to-serial interface in order to access that console from
your computer:

    https://www.acmesystems.it/DPI

How to build the image
======================

If you have an Acqua module with 256 MiB of RAM, type:

$ make acmesystems_acqua_a5_256mb_defconfig

If you have the 512 MiB version, type instead:

$ make acmesystems_acqua_a5_512mb_defconfig

You can optionally tweak the configuration and add packages by typing:

$ make menuconfig

Then, proceed with the build:

$ make

How to write the microSD card
=============================

The system image is the file "sdcard.img" in the "output/images"
directory. Write it to the card by invoking:

$ sudo dd if=output/images/sdcard.img of=/dev/sdX bs=1M

where `sdX' is the block device representing the microSD card.