2107f7a75b
Very similar to the other stm32mp157-based boards, except that we use the multi_v7 defconfig for ease of maintenance. Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
42 lines
903 B
Plaintext
42 lines
903 B
Plaintext
Arrow Avenger96
|
|
|
|
Intro
|
|
=====
|
|
|
|
This configuration supports the Arrow Avenger96 board:
|
|
|
|
https://wiki.dh-electronics.com/index.php/Avenger96
|
|
|
|
How to build
|
|
============
|
|
|
|
$ make avenger96_defconfig
|
|
$ make
|
|
|
|
How to write the microSD card
|
|
=============================
|
|
|
|
WARNING! This will destroy all the card content. Use with care!
|
|
|
|
Once the build process is finished you will have an image called
|
|
"sdcard.img" in the output/images/ directory.
|
|
|
|
Copy the bootable "sdcard.img" onto an microSD card with "dd":
|
|
|
|
$ sudo dd if=output/images/sdcard.img of=/dev/sdX
|
|
|
|
Boot the board
|
|
==============
|
|
|
|
(1) Configure the boot switches for boot from microsd: 1-0-1
|
|
|
|
(2) Insert the microSD card in the slot
|
|
|
|
(3) Plug a serial adapter (beware: 1v8 levels!) to the low speed
|
|
expansion connector
|
|
|
|
(4) Plug in power cable
|
|
|
|
(5) The system will start, with the console on UART, but also visible
|
|
on the screen.
|