buildroot

History

Giulio Benetti e91402d145 board/friendlyarm/nanopi-neo-plus2/genimage.cfg: beautify file Beatify this genimage .cfg file to have consistency with all genimage .cfg files in Buildroot. Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com> Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>		2021-11-08 22:59:27 +01:00
..
rootfs_overlay/lib/firmware/brcm	board: Add FriendlyARM Nanopi NEO Plus2 support	2019-10-19 22:46:04 +02:00
extlinux.conf	configs/friendlyarm_nanopi_neo_plus2: use an extlinux instead of boot.cmd	2019-12-10 09:02:25 +01:00
genimage.cfg	board/friendlyarm/nanopi-neo-plus2/genimage.cfg: beautify file	2021-11-08 22:59:27 +01:00
linux-extras.config	board: Add FriendlyARM Nanopi NEO Plus2 support	2019-10-19 22:46:04 +02:00
post-build.sh	configs/friendlyarm_nanopi_neo_plus2: use an extlinux instead of boot.cmd	2019-12-10 09:02:25 +01:00
readme.txt	board: Add FriendlyARM Nanopi NEO Plus2 support	2019-10-19 22:46:04 +02:00

readme.txt

Intro
=====

This default configuration will allow you to start experimenting with the
buildroot environment for the Nanopi NEO Plus2. With the current configuration
it will bring-up the board, and allow access through the serial console.

Nanopi NEO2 link:
http://nanopi.io/nanopi-neo-plus2.html

Wiki link:
http://wiki.friendlyarm.com/wiki/index.php/NanoPi_NEO_Plus2

This configuration uses U-Boot mainline and kernel mainline.

How to build
============

    $ make friendlyarm_nanopi_neo_plus2_defconfig
    $ make

Note: you will need access to the internet to download the required
sources.

How to write the SD card
========================

Once the build process is finished you will have an image called "sdcard.img"
in the output/images/ directory.

Copy the bootable "sdcard.img" onto an SD card with "dd":

  $ sudo dd if=output/images/sdcard.img of=/dev/sdX
  $ sudo sync

Insert the micro SDcard in your Nanopi NEO Plus2 and power it up. The console
is on the serial line, 115200 8N1.