deepcrayon/buildroot
deepcrayon/buildroot
1
0
Fork 0
Code Issues Pull requests Packages Projects Releases Wiki Activity
buildroot/board/octavo/osd32mp1-brk
History
Thomas Petazzoni 97fc9b2a7f board/*/genimage.cfg: use partition-table-type = "gpt" 
The gpt = "true" form is deprecated in genimage, use
partition-table-type = "gpt" instead.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
2022-07-23 15:36:21 +02:00
..
linux-dts configs/octavo_osd32mp1_brk: new defconfig 2022-03-20 18:08:52 +01:00
overlay/boot/extlinux configs/octavo_osd32mp1_brk: new defconfig 2022-03-20 18:08:52 +01:00
patches/uboot configs/octavo_osd32mp1_brk: new defconfig 2022-03-20 18:08:52 +01:00
tfa-dts configs/octavo_osd32mp1_brk: new defconfig 2022-03-20 18:08:52 +01:00
genimage.cfg board/*/genimage.cfg: use partition-table-type = "gpt" 2022-07-23 15:36:21 +02:00
readme.txt configs/octavo_osd32mp1_brk: new defconfig 2022-03-20 18:08:52 +01:00

readme.txt 

OSD32MP1-BRK

Intro
=====

This configuration supports the OSD32MP1-BRK platform:

  https://octavosystems.com/octavo_products/osd32mp1-brk/

How to build
============

 $ make octavo_osd32mp1_brk_defconfig
 $ make

How to write the microSD card
=============================

Once the build process is finished you will have an image called
"sdcard.img" in the output/images/ directory.

Copy the bootable "sdcard.img" onto an microSD card with "dd":

  $ sudo dd if=output/images/sdcard.img of=/dev/sdX

Boot the board
==============

 (1) Insert the microSD card.

 (2) Plug an USB-SERIAL cable on the RX, TX and GND pins

 (3) Plug a micro-USB cable to power-up the board.

 (4) The system will start, with the console on UART.