buildroot/board/boundarydevices/common
Gary Bisson bdc2246149 board/boundarydevices: add i.MX8MQ support to u-boot scripts
- Update RAM address
- Update kernel image name for ARM64
- Update U-Boot boot command for ARM64
- Remove obsolete cmd_xxx_present check
- Remove obsolete wlan.mac parameter
- Add cmd_mipi command for MIPI-DSI interface

Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2018-07-19 15:43:26 +02:00
..
boot.cmd board/boundarydevices: add i.MX8MQ support to u-boot scripts 2018-07-19 15:43:26 +02:00
genimage.cfg board/boundarydevices: remove u-boot from genimage.cfg 2016-11-02 17:25:15 +01:00
post-build.sh board/boundarydevices: add i.MX8MQ support to post-build.sh 2018-07-19 15:42:55 +02:00
post-image.sh board/boundarydevices: rename folder and update readme 2016-03-03 17:42:14 +01:00
readme.txt board/boundarydevices: rename folder and update readme 2016-03-03 17:42:14 +01:00
upgrade.cmd board/boundarydevices: add i.MX8MQ support to u-boot scripts 2018-07-19 15:43:26 +02:00

Buildroot for Boundary Devices platforms:

https://boundarydevices.com/product-category/popular-sbc-and-som-modules/

Here is the list of targeted platforms per defconfig:

- nitrogen6x_defconfig
  - BD-SL-i.MX6 (SABRE-Lite)
  - Nitrogen6X
  - Nitrogen6_Lite
  - Nitrogen6_MAX
  - Nitrogen6_VM
  - Nitrogen6_SOM
  - Nitrogen6_SOMv2

- nitrogen6sx_defconfig
  - Nitrogen6_SoloX

- nitrogen7_defconfig
  - Nitrogen7

To install, simply copy the image to a uSD card:

$ sudo dd if=output/images/sdcard.img of=/dev/sdX

Where 'sdX' is the device node of the uSD partition.

To upgrade u-boot, cancel autoboot and type:

> run upgradeu