![Peter Korsgaard](/assets/img/avatar_default.png)
4.18 brought cpufreq support for H3, but sunxi_defconfig does not enable the driver for the sy8106a regulator used on the board or enable the ondemand cpufreq govenor so the frequency is dynamically adjusted - So enable these in linux.fragment. Signed-off-by: Peter Korsgaard <peter@korsgaard.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
35 lines
1.3 KiB
Plaintext
35 lines
1.3 KiB
Plaintext
BR2_arm=y
|
|
BR2_cortex_a7=y
|
|
BR2_ARM_FPU_VFPV4=y
|
|
BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_19=y
|
|
BR2_TARGET_GENERIC_HOSTNAME="OrangePi_PC"
|
|
BR2_TARGET_GENERIC_ISSUE="Welcome to Buildroot for the Orange Pi PC"
|
|
BR2_SYSTEM_DHCP="eth0"
|
|
BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
|
|
BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/orangepi/orangepi-pc/genimage.cfg"
|
|
BR2_LINUX_KERNEL=y
|
|
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
|
|
BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.19.3"
|
|
BR2_LINUX_KERNEL_DEFCONFIG="sunxi"
|
|
BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/orangepi/orangepi-pc/linux.fragment"
|
|
BR2_LINUX_KERNEL_DTS_SUPPORT=y
|
|
BR2_LINUX_KERNEL_INTREE_DTS_NAME="sun8i-h3-orangepi-pc"
|
|
BR2_TARGET_ROOTFS_EXT2=y
|
|
BR2_TARGET_ROOTFS_EXT2_4=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
BR2_TARGET_UBOOT=y
|
|
BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
|
|
BR2_TARGET_UBOOT_CUSTOM_VERSION=y
|
|
BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2018.11"
|
|
BR2_TARGET_UBOOT_BOARD_DEFCONFIG="orangepi_pc"
|
|
BR2_TARGET_UBOOT_NEEDS_DTC=y
|
|
BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y
|
|
BR2_TARGET_UBOOT_FORMAT_CUSTOM=y
|
|
BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot-sunxi-with-spl.bin"
|
|
BR2_TARGET_UBOOT_BOOT_SCRIPT=y
|
|
BR2_TARGET_UBOOT_BOOT_SCRIPT_SOURCE="board/orangepi/orangepi-pc/boot.cmd"
|
|
BR2_PACKAGE_HOST_DOSFSTOOLS=y
|
|
BR2_PACKAGE_HOST_GENIMAGE=y
|
|
BR2_PACKAGE_HOST_MTOOLS=y
|
|
BR2_PACKAGE_HOST_UBOOT_TOOLS=y
|