buildroot/board/beagleboardx15/readme.txt
Peter Seiderer 61c8fcbc82 board/beagleboardx15: replace utf-8 graphic sympols by ascii characters
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2019-05-18 23:34:22 +02:00

50 lines
948 B
Plaintext

BeagleBoard X15
Intro
=====
This config currently supports the beagleboard x15,
and generates a barebone image.
The image must be flashed to a SD card to be used.
How to build it
===============
$ make beagleboardx15_defconfig
Then you can edit the build options using
$ make menuconfig
Compile all and build a sdcard image:
$ make
Result of the build
-------------------
After building, you should get a tree like this:
output/images/
+-- am57xx-beagle-x15.dtb
+-- am57xx-beagle-x15-revb1.dtb
+-- boot.vfat
+-- MLO
+--rootfs.ext2
+-- rootfs.ext4
+-- rootfs.tar
+-- sdcard.img
+-- u-boot.img
+-- u-boot-spl.bin
+-- zImage
How to write the microSD card
=============================
Once the build process is finished you will have an image called "sdcard.img"
in the output/images/ directory.
Copy the bootable "sdcard.img" onto an SD card with "dd":
$ sudo dd if=output/images/sdcard.img of=/dev/sdX