buildroot

History

Carlos Santos 5502a889dd configs/beaglebone_qt5: don't use custom post-image script Use support/scripts/genimage.sh, instead, which prevents duplicating TARGET_DIR under ${BUILD_DIR}/genimage.tmp/root. Use a post-build script to copy uEnv.txt to BINARIES_DIR, as made for beaglebone. Drop the post-image script. Signed-off-by: Carlos Santos <unixmania@gmail.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>		2019-12-30 14:46:42 +01:00
..
patches/linux	configs/beaglebone: update kernel/uboot, add AM335x EVM support	2016-10-15 17:39:46 +02:00
genimage.cfg	beaglebone: add DT for BeagleBone Green	2017-04-05 22:25:40 +02:00
genimage_linux41.cfg	board/beaglebone: skip bonegreen.dtb if not built	2017-08-11 22:36:39 +02:00
linux-sgx.fragment	configs/beaglebone_qt5: bump kernel and U-Boot, add weston	2019-12-30 14:46:41 +01:00
post-build.sh	configs/beaglebone: don't use custom post-image script	2019-10-27 12:20:46 +01:00
readme.txt	board/beaglebone: replace utf-8 graphic sympols by ascii characters	2019-05-18 23:34:30 +02:00
uEnv.txt	board/beaglebone: fix boot on BeagleBone Black	2019-11-15 23:38:29 +01:00

readme.txt

CircuitCo BeagleBone
Texas Instuments AM335x Evaluation Module (TMDXEVM3358)

Description
===========

This configuration will build a complete image for the beaglebone and
the TI AM335x-EVM, the board type is identified by the on-board
EEPROM. The configuration is based on the
ti-processor-sdk-02.00.00.00. Device tree blobs for beaglebone
variants and the evm-sk are built too.

For Qt5 support support use the beaglebone_qt5_defconfig.

How to build it
===============

Select the default configuration for the target:
$ make beaglebone_defconfig

Optional: modify the configuration:
$ make menuconfig

Build:
$ make

Result of the build
===================
output/images/
+-- am335x-boneblack.dtb
+-- am335x-bone.dtb
+-- am335x-evm.dtb
+-- am335x-evmsk.dtb
+-- boot.vfat
+-- MLO
+-- rootfs.ext2
+-- rootfs.tar
+-- sdcard.img
+-- u-boot.img
+-- uEnv.txt
+-- zImage

To copy the image file to the sdcard use dd:
$ dd if=output/images/sdcard.img of=/dev/XXX

Tested hardware
===============
am335x-evm (rev. 1.1A)
beagleboneblack (rev. A5A)
beaglebone (rev. A6)

2016, Lothar Felten <lothar.felten@gmail.com>